ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • When you purchase through links on our site, we may earn an affiliate commission. Read more here.

Threaded Wheel Hub



STRBramley

ClioSport Club Member
  182 Trophy #404
I think I know the answer to this one but I thought I'd post in case anyone had any clever ideas or solutions.

I took my NSF wheel off for the first time this week to fit a new arch liner and I noticed one of the bolts was very loose.
Upon inspection it looked cross threaded and when I tightened it back up the bolt just kept spinning. I tried another bolt with the same result.

Is it possible to get these tapped out or do I need a new hub?

If a new hub is required, is the below what I would need? I know the ad states for a 172 but are they different on a 182? Would I need anything else other than new wheel nuts?

Cheers

https://www.ebay.co.uk/itm/Renault-Clio-Sport-172-2001-2006-2-0-16v-Passenger-NSF-Front-Hub-ABS-Sensor/193183809223?fits=Model:Clio|Cars+Type:2.0+16V+Sport&hash=item2cfaa6fec7:g:To4AAOSwiJRduY6A
 

JamesBryan

ClioSport Club Member
  Titanium 182
Yeah just fit a new hub setup or just the flange itself but that will require a new bearing and having a big press.

172 hubs will fit a 182 as long as yours is not a cup packed model.
 

mossyv6

ClioSport Club Member
  Trophy,V6,5GT,AG200
Stick a second hand hub on. Very easy to swap on Clios and can be done at home as no need to mess with press machines.
 

STRBramley

ClioSport Club Member
  182 Trophy #404
Yeah just fit a new hub setup or just the flange itself but that will require a new bearing and having a big press.

172 hubs will fit a 182 as long as yours is not a cup packed model.

Thanks for the replies everyone.
It's a 182 Trophy, I assume this doesn't use the cup pack spec?

Edit: Actually, reading this, I think I need the 60mm spacing.
 
Last edited:

Mbeau

ClioSport Club Member
  Clio 172
Only got one 54mm hub left unfortunately. I need to get another breaker!!
 

M90SR

ClioSport Club Member
My thoughts are that if you are going to take the hub to a 3rd party to have the bearing pressed out, you may as well get a new hub and bearing from Autodoc, and refurbish your existing assembly.

Front hub 7700830220

https://www.autodoc.co.uk/topran/2731654

OE spec wheel bearing 7701206771

https://www.autodoc.co.uk/snr/1928691



Alternatively, buy and fit the eBay item, and if it has a noisy bearing, refurbish your old one and refit it.

On 24 May 2020 at 11:07 MILLER STEPHEN <stephen.miller347@ntlworld.com> wrote:

https://cliosport.net/threads/threaded-wheel-hub.832614/#post-11913827
60mm 182 Cup pack hub required for a Trophy, not 54mm 172..
@Mbeau or @Midge may be able to help, otherwise there`s this on eBay.
https://www.ebay.co.uk/itm/Renault-Sport-Clio-182-Cup-60mm-Hub-Passenger-near-Side/164150128281
 

STRBramley

ClioSport Club Member
  182 Trophy #404
My thoughts are that if you are going to take the hub to a 3rd party to have the bearing pressed out, you may as well get a new hub and bearing from Autodoc, and refurbish your existing assembly.

Front hub 7700830220

https://www.autodoc.co.uk/topran/2731654

OE spec wheel bearing 7701206771

https://www.autodoc.co.uk/snr/1928691



Alternatively, buy and fit the eBay item, and if it has a noisy bearing, refurbish your old one and refit it.

Cheers, I’ve bought the eBay item. I’ll see how it goes [emoji106]
 


Top