Uprated / modified exhaust mounts

[clio182nurburg]

I fitted the red ones too with some silicone around them and a few cable ties, only lasted afew weeks before the mounts fell out the holes abit and the exhaust sagged again, now I've re-done them with lots of cable ties! all good and best the exhaust has ever been positioned.

 

[daveio]

Great thread this just been reading through as my hangers are proper buggered now

Is it an easy job replacing the hangers ? By easy i mean just support the exhaust ,undo the bolts and pull the hanger free from the exhaust? Sorry if that sounds stupid but not got a lot of patience on things and wondered if it would be easier to get a garage to do
cheers

 

[Akay]

On my 182 I had the powerflex bushes in the mounts and found they constantly tilted or moved about, so I had them bonded in with tigerseal.

On my 172 Ive filled a standard mount with tigerseal and seems to be a very similar stiffness.

Its easy to replace the hangers, if nothing snaps! On my 182 had no issues, jack under the backbox, undo 3 bolts, and pull. I guarantee at least one will snap! On my 172 all 3 snapped or rounded off and I had to drill them/hammer and chisel the captive nuts!

Worth doing though.

 

[Fantastic Nostrils]

Bump! My clio has had a little bump in the past and so I am thinking about using the universal bushes- just in case the hangars have bent at all. Was planning on lining it all up and then drilling the holes in the correct place. Anyone have any other suggestions?

 

[iHow3y]

Thread revive, hope everyone theres still a few here that did this cheap modification all them years ago. I came across this thread while looking for an alternative for the originals, I recently bought a little 182 and both rear and the centre one are all bust. So glad I came across this. Il make sure to update when I receive all my bits and get around to doing it ?

 

[Ianboom]

It's a good mod, although I've just fitted the 'proper' powerflex mounts to the old brackets.

 

[iHow3y]

Il probably go down the same route once these are bust, but needed a quick fix for pennies. Hoping to get a few more cheap mods for it and then have a few track days local before I get attached as it's currently my daily till I buy a new car