ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • When you purchase through links on our site, we may earn an affiliate commission. Read more here.


frayz

ClioSport Club Member
Have to say another huge thanks to Alex @ AW Motorworks for fitting a pair of brand new driveshafts and poly boots in WZD this morning... and yet more gearbox oil. Its 5th lot of oil in the last 9 months Haha. Needless to say the gearbox oil was a clean as it went in.

I had a noise that i suspected could have been a shaft so ordered 2 new ones, fixed the noise which turned out not to be a shaft but fitted 2 new ones anyway... because why not :D
F286D0E8-818E-4D6B-A76A-DAD0700F3628.jpeg
 

frayz

ClioSport Club Member
Turbo Testing

As said previously i was hoping to drive some turbocharged Clios this morning and thanks to some very generous owners, i was allowed a go in a pair of them.

Car 1)
This was a low boost 182 setup running approx. 240bhp on stock engine & gearbox. (7psi)
Boost controlled to limit midrange torque and allow boost to be held further up for peak power to be used on track.

Car 2)
This car was 172 Cup with switchable boost running no torque limit (13psi).
240bhp low boost, 300bhp high boost forged engine with a basic Engine Dynamics kit.

Both cars fitted with LSDs, proper tyres, brakes, dampers and all the trimmings to be done properly.


I'm no stranger to turbocharged cars having started out with a 350bhp/340lbsft Sierra Cossie when i was aged 19. Later on with what became a 575bhp/520lbsft Subaru Impreza.
Also owned a supercharged Mini GP running 250bhp+ and driven lots of big bhp turbo cars, the fastest on the road being a 700bhp+ 996 GT2.
So I went in with both my eyes and my mind open to turbocharging my own 182, as maybe this was the extra power and theatre i was perhaps after?

The LB 182 had a decent amount of low down torque which provided a nice amount of get up and go in 1st,2nd and 3rd gear. Thereafter the torque dropped off quite significantly and i was left wanting more. This was great for a bit of low down punch but thereafter felt similar to a standard car.
Personally this setup didn't suit me at all, but was done this way at the owners request for trackday use.
It was great to experience how they can be tailored to each owners needs should that be what you want.

The Cup LB was significantly quicker than the 182 being not torque limited and although only about 20lbsft more than the LB 182, it was the aggressiveness of delivery and the overall torque spread. A LB Clio in this setup makes for a suitably quick road car. Just borders on what's usable in all conditions and would hook up and drive well. For most people this would be more than enough.

The Cup HB in the damp was completely unusable in anything below the middle of 3rd gear due to the aggressiveness of the torque ramp. A proper ECU with boost by gear would be nice to use here as you could add some much needed flexibility.
Once on the roll it was a potently fast car with approx. 300bhp per ton comfortably putting in the same category as a Porsche 997 turbo.

I cant write everything here, but Alex and i spoke at length about what options i have for going boosted with my 182. Needless to say he is incredibly open and honest about what can and cannot be achieved, what i would or wouldn't be happy with too.

I went today really wanting the turbocharged route to be an easy decision, its cheap and easy, but it has been anything but. I wondered if when i got back in my own car that i would be feeling it was hugely lacking. But driving home was quite the opposite. I have been thinking lately about what i like about the Clio and that was how assessable it is to really enjoy driving it. The little lightweight car coupled to the tactility and delicacy of the NA engine.
The more I've driven it lately the more i have been enjoying using all the revs, the delivery that builds as the rpms rise and the crescendo of grabbing another gear and doing it again. The balance is great, and I've always loved how adjustable it is on and off the throttle mid corner too.

Having experienced both turbo Clios for a decent real world drive, i think I've decided the turbocharged route is not for me with the Clio. Yes the allure of cheap bang for buck is superb. Its pennies to boost one of these which results in a significantly quick car.
The turbocharged car makes for a very potent little machine and is a bargain way to performance. If you have never experienced a fast turbocharged car, or you just want to go quick making some great noises, and not really caring how you get there, its great product. In HB it feels like you've been fired from a cannon and i would say is probably somewhat dangerous should you not be familiar with car control at the limit.

The turbo route certainly adds something to the Clio package, but for me i think it took away more than it added. It alters the way the car behaves and its power delivery (certainly for me) removed too much of how good the Clio feels to drive.

So i have to say I'm incredibly grateful for the experience in both cars, but i think I'll be exploring the NA route with whatever route that may be. :)
 

Mcaff

ClioSport Club Member
Great write up enjoying the updates and attention to detail with it. A vote here for 197 cams ive ditched the aircon and ran Epas on mine as well does certainly feel as though it revs up much quicker. The extra 18 - 20bhp makes all the difference when pressing on while still retaining that NA buzz.
 

frayz

ClioSport Club Member
Great write up enjoying the updates and attention to detail with it. A vote here for 197 cams ive ditched the aircon and ran Epas on mine as well does certainly feel as though it revs up much quicker. The extra 18 - 20bhp makes all the difference when pressing on while still retaining that NA buzz.
Funny enough, one of the cars i drove today had EPAS. Felt horrid compared to a HPAS system, i'll be keeping my fluid and adding a cooler if needed.
 

frayz

ClioSport Club Member
Good choice @frayz
I have been round brands in a turbo 1*2 (i think it was alex's). Tho impressive it takes away the point of the clio for me and id just rather have an r26.
I did own an r26 for 3 years but always preferred the n/a of the clio.

Oh mate its a fantastic party piece. If you strap an unsuspecting mate in the passenger seat of a 300bhp turbocharged Clio, they're going to write off their underpants if they're usually used to taking the bus. Also after seeing what can be done, the reliability of a sub 280bhp car didn't faze me one bit. I'm more than confident with the correct heat management that the setup can be made as reliable as any other stock turbocharged car.

For me it was more about how it felt and although faster than a standard car, i didn't enjoy it as much as a standard car.
If its not more enjoyable, for me its a non starter.
 

massiveCoRbyn

ClioSport Club Member
  Several
Really interesting write up that, interesting to hear the viewpoint of all the options. I suspected that the high boost would be much as you described, as it's a lot of power to put through a little car like the Clio. I have a feeling that my impression would be quite similar to yours, as the quick response and revviness is a fundamental part of what makes a quick Clio a quick Clio in my view.

Looking forward to seeing what you decide to do!
 

frayz

ClioSport Club Member
Really interesting write up that, interesting to hear the viewpoint of all the options. I suspected that the high boost would be much as you described, as it's a lot of power to put through a little car like the Clio. I have a feeling that my impression would be quite similar to yours, as the quick response and revviness is a fundamental part of what makes a quick Clio a quick Clio in my view.

Looking forward to seeing what you decide to do!

Being honest, if I was 20 again, chances are I’d have got out of either one of those cars like a giddy teenager and wouldn’t have been able to empty my wallet fast enough.

I’m also aware that I’m probably a little spoilt with regards to my previous experience in turbo cars. However I’ve tried to be as open and honest as possible about what I liked and what I didn’t. I appreciate others will have different opinions to me and thats fine.
The turbo route is a performance bargain really and who in their right mind would spend more to get seemingly less?

All I can say to anyone romancing with the idea of a turbo kit is to go drive one and make up your own mind.
Every bit of me wanted to love it, but it turns out I didn’t as much as I thought I might.
 

Jekyll

ClioSport Club Member
So now its saying NA, what options are there?

ITB's
RS2
Cams (various)
Group N timing
Bike bodies
Remap

Anything else I've missed? Obviously you can mix all that up.
 

frayz

ClioSport Club Member
So now its saying NA, what options are there?

ITB's
RS2
Cams (various)
Group N timing
Bike bodies
Remap

Anything else I've missed? Obviously you can mix all that up.

The cars a daily driver so ITBS/Carbs etc are out. They have no cold start qualities and that's no good to me. You also lose the cruise control (not the end of the world, granted) and also requires a standlone PCM as the OEM PCM cant control them with the swap to cable throttle and loss of MAP sensor.
I also really don't want to compromise by losing the AC or HPAS. AC i would have to be seriously convinced to let go.

EPAS just feels crap. It might remove the reliability issue of fluid overheating but steering feel is probably one of the most important qualities of driving a car for me. Its one of the reasons i love my Cayman R so much as it still has proper HPAS, all Porsche models thereafter came with EPAS and it took Porsche a number of years yet get it to a point where its pretty good, but still not as communicative as an HPAS setup. Even the GT4, 991 onwards GT3s steering wasn't as good.

Which leaves me with the usual cams/breathing mods or the possibility of building a high comp motor with some high crown pistons. Maybe lighten the rotating assembly inc a lighter flywheel for some added response.
Uprate the valvetrain to cope with sustained higher rpms and some little helpers such as an oil cooler and uprated rad pack.

The other elephant in the room here is that my car is basically stock with an ITG Maxogen, catback exhaust on standard calibration.
Its never been on any rolls so i really have no idea as yet where I'm starting from.
 

Clio_fool

ClioSport Club Member
Supercharge it🤑🤑🤑😂.
I've said it before, adding a blown glob of torque will completely change the character of a 1*2 and that's probably why lots of people who do it sell up shortly afterwards. At least you got to try it out before jumping in feet first. Looking forward to the next upgrades now frayz👍.
 

-Simon

ClioSport Club Member
  172-E92 M3-ZT V8
Like others have said a really interesting write up on your turbo experience. Did the 2 cars your tried have standalone ECU’s? I have been in a number of other turbo clios (other than my own) and i have to agree that the mapping is crucial to how the car feels and behaves. Mine uses an adaptronic ECU and keeps a lot of the N/A engine characteristics but just turned up a few notches. I completely understand your point about changing the cars inherent strengths and enjoying the power delivery build in a N/A unit. At least now you have answered your nagging doubts around the direction of travel and can focus on improving the engine without forced induction. Will look forward to seeing what route you take and of course the offer of driving my car is still open if you want a third opinion.
 

Pegasaurus Rex

Bon Jovi Officianado
ClioSport Club Member
I must say Frayz it’s a very planned and pragmatic way of ensuring you are making the absolute right decision based on your own needs from the car. I have to say I like the idea of of the RS2, 197 cams & group N timing all done properly and neatly. Would love to try a car with that setup to decide if I actually want to go that route long term. But I also like the idea of the Clio as Renault intended it.
 

frayz

ClioSport Club Member
Supercharge it🤑🤑🤑😂.
I've said it before, adding a blown glob of torque will completely change the character of a 1*2 and that's probably why lots of people who do it sell up shortly afterwards. At least you got to try it out before jumping in feet first. Looking forward to the next upgrades now frayz👍.

I think as someone else said, they maybe have a teething issue or two and cannot spanner themselves and get despondent with them.
I loved the supercharger on my Mini GP, gobs of power and really responsive. Its about the only thing i liked about the car.
 

frayz

ClioSport Club Member
Like others have said a really interesting write up on your turbo experience. Did the 2 cars your tried have standalone ECU’s? I have been in a number of other turbo clios (other than my own) and i have to agree that the mapping is crucial to how the car feels and behaves. Mine uses an adaptronic ECU and keeps a lot of the N/A engine characteristics but just turned up a few notches. I completely understand your point about changing the cars inherent strengths and enjoying the power delivery build in a N/A unit. At least now you have answered your nagging doubts around the direction of travel and can focus on improving the engine without forced induction. Will look forward to seeing what route you take and of course the offer of driving my car is still open if you want a third opinion.
Both cars were running AEM units. I agree a lot can be altered with a proper ECU that has a lot of flexibility.
However its the big torque delivery which i think i didn't like in the car. Oddly the sound has a lot to do with what i didn't like so much either.
Thank you so much again for the offer of the drive too :)
 

frayz

ClioSport Club Member
I must say Frayz it’s a very planned and pragmatic way of ensuring you are making the absolute right decision based on your own needs from the car. I have to say I like the idea of of the RS2, 197 cams & group N timing all done properly and neatly. Would love to try a car with that setup to decide if I actually want to go that route long term. But I also like the idea of the Clio as Renault intended it.
You have to try these things. Like i say, i was very open to jumping in a turbocharging it. But i wanted to have a go first.
Glad i did. :)
 

frayz

ClioSport Club Member
So couple of tiny jobs on WZD this morning that i wanted to do.
Firstly was fit new 12.9 hardware to the TCAs. I had previously zinc coated these and ever since I've been a bit twitchy about hydrogen embrittlement.
Deep down I'm sure they were fine but i couldn't shake it from my doubts and you can have doubt about a key fastener like that.

Next was to drop my front spacers from +16mm down to +10mm in an attempt to dial out some tramlining i was experiencing. Im happy to say this has made a significant improvement to the way the car steers and drives undulations now.

Lastly was something id been wondering about for a bit, brake ducts.
I am yet to see any setup that not only works but looks nice on the front of the car. The ebay offerings look pants IMO and don't follow the lines of the car properly, likewise the bass port idea also doesn't sit at the correct angle. The Cup racers are arguably the most efficient but look ugly and i wasn't prepared to hack up the bumper. I had an idea about rendering an OEM foglamp and 3D printing a duct that bolts into the existing housing exactly as per OEM.
I then found a guy who had done exactly that, but for the Clio 197/200. I had a pretty good idea that the foglamps were a carry-over item from the Mk2 Clio so was pretty confident they would fit.
This is just a trial fit for now. but they fit perfectly as per an OEM foglight and follow the lines of the front of the car perfectly. I'm really pleased with how these look and will soon fit them properly with some ducting and Cup racer deflector plates.

2.jpg
3.jpg
1.jpg
4.jpg
5.jpg
6.jpg
 

-Simon

ClioSport Club Member
  172-E92 M3-ZT V8
Those ducts look bob on. Like you say the others look like an afterthought but those look very OEM +. Impressive 👌
 

frayz

ClioSport Club Member
Those ducts do look good. How much are they and are you on commission? 😂👍
I wish I was on commission. I did ask him. Haha.
£65 they are. Which normally I would raise an eyebrow at for a bit of 3D printed plastic. Having said that, you can really see he’s put in the time to get them as good as they are and they’re nice and robust too. Development time doesnt come for free so I thought they we’re good enough value seeing as nobody else makes anything as good yet.
I know the boys at Pro-Am Racing have a brake cooling package in the pipeline so ive no doubts that will be a nice bit of engineering if/when it comes to fruition. Until then, I think these are pretty sweet.
 

Louis

I Park Like a C**t
ClioSport Club Member
So couple of tiny jobs on WZD this morning that i wanted to do.
Firstly was fit new 12.9 hardware to the TCAs. I had previously zinc coated these and ever since I've been a bit twitchy about hydrogen embrittlement.
Deep down I'm sure they were fine but i couldn't shake it from my doubts and you can have doubt about a key fastener like that.

Next was to drop my front spacers from +16mm down to +10mm in an attempt to dial out some tramlining i was experiencing. Im happy to say this has made a significant improvement to the way the car steers and drives undulations now.

Lastly was something id been wondering about for a bit, brake ducts.
I am yet to see any setup that not only works but looks nice on the front of the car. The ebay offerings look pants IMO and don't follow the lines of the car properly, likewise the bass port idea also doesn't sit at the correct angle. The Cup racers are arguably the most efficient but look ugly and i wasn't prepared to hack up the bumper. I had an idea about rendering an OEM foglamp and 3D printing a duct that bolts into the existing housing exactly as per OEM.
I then found a guy who had done exactly that, but for the Clio 197/200. I had a pretty good idea that the foglamps were a carry-over item from the Mk2 Clio so was pretty confident they would fit.
This is just a trial fit for now. but they fit perfectly as per an OEM foglight and follow the lines of the front of the car perfectly. I'm really pleased with how these look and will soon fit them properly with some ducting and Cup racer deflector plates.

View attachment 1479962View attachment 1479963View attachment 1479961View attachment 1479964View attachment 1479965View attachment 1479966
They do look good!
I cant help but think they need some sort of lip to sit around the edge of the fog surround. Might look into designing a version myself, only problem being I cut out my fog brackets a while ago 😂
 

frayz

ClioSport Club Member
They do look good!
I cant help but think they need some sort of lip to sit around the edge of the fog surround. Might look into designing a version myself, only problem being I cut out my fog brackets a while ago 😂
This is what I didn’t want, to have to start hacking bits up. I liked the idea of a totally OEM style fitting item. In the 197, they have the bumper meeting the edge of the duct, but the aperture in the 172/182 is larger even though they use the same lamp unit.
 

Louis

I Park Like a C**t
ClioSport Club Member
This is what I didn’t want, to have to start hacking bits up. I liked the idea of a totally OEM style fitting item. In the 197, they have the bumper meeting the edge of the duct, but the aperture in the 172/182 is larger even though they use the same lamp unit.
Yeah, didnt bother me too much as I'll never go back to foglights. Could easily secure bits to the cover itself and have it as a single unit that you clip in.
 

Clio_fool

ClioSport Club Member
I like them, and the fact they bolt straight in is a huge positive. But for £65 I'd rather buy brand new fog lights 😂. Especially since one of my replacement ones has fogged up this week 🙄.
 

frayz

ClioSport Club Member
So...
Brake ducts in and plumbed up with some 2 ply 70mm silicone ducting, I’ve also picked up some Cup Racer deflectors which I may fit, I also have some ideas for making some blades to fit on the calipers however I think for fast road at the moment, just getting extra ventilation in there is more than adequate.

I’ve also picked up a couple of other items for WZD. Thanks to @AdamCup for the freshly powdercoated roll bar and Pflex black bushes. Once fitted, these will complete the entire cars refresh for every bush, mount, bearing and ball joint now replaced in the last 6 months.

Ive also found myself a new exhaust in the shape of an Orbisoud. This is a silenced decat version although I may cut and fit my OEM cat back in. She needs a bit of TLC, but I’m sure we can get there. Ive already sourced a new clamp, and started the overhaul of the brackets. I looked into buying new mounts but Orbisoud wanted €250 for those. So I told them they can keep them lol.
Quality wise it’s okay, but not sure why so many rave over it, it’s marginally better than my BTM but nowhere near the quality of my Simpson Race system the Impreza used to wear.
Anyway, I’m sure it will come up nice and looking forward to hearing it.
FE6DBA9D-A853-4DA4-9B95-995A099A9EEB.jpeg
CE127DAB-F3DD-4BAB-BA71-6C8E25666982.jpeg
79DC1D92-E881-43D2-A732-40720E2A44CC.jpeg
1A3F2CA9-D5D1-4838-9F88-CCD7D1237A9D.jpeg
3463018B-71C3-4CBA-85C4-BA9ED94C5E1C.jpeg
97778364-B9CE-4E4C-91EB-5B514C852CF7.jpeg
 


Top