Search results

can i clean a K&N induction kit off in white spirits or anything like that?? also underneath theres 2 small holes? i presume 1s a breather pipe, whats the other, this is for a 1.8 16v

haha now i dont only have one smashed up car.......i have 2, ive just bought a corsa gsi, its all good,not

is there anyway you can fix these if they are playing up or do you have to buy a new one. ta

wheres the best and cheapest place for me to buy clear fog lights for my mark 1 clio 16valve and how much are they?thanx

coming back from gokarting last nite, up a dual carrigeway, following a mate in an xr2i, road works, and some sh*ts had moved the cones and folded the signs down, we went straight on, towards a concrete block in the post, he swerwed and i went into the front side of his car. Right mess, police...

hi can anyone tell me which indicator bulbs are in the mark 1 clios? is it the sort with the pins 180 degrees from each other?cant be bothered to go and take mine out to look. ta daf

looking at a rollcage to go in my valver, want a big chromed one like ktec sell, but its 250 quid, dont want one with bars etc that go along the front, any ideas? ta daf

right i was thinking, bear with me, ive stripped the back out off my 16valve and am about to put harnesses in, but on my standard seats? does anyone think its worth while swapping my full leather trim for standard seats and money, so i dont spoil the leather ones? opinions please guys

just stripped out the back seats etc to make way for the harnesses and have an annoying buzzing, its coming from a piece just below the boot look on the car, near the boot floor, it looks like 2 breather flaps, any1 had anything to do with these or taken them out. ta daf

right can any1 give me some advice im thinking of striping out the back seats, boarding it off (maybe a bit of sounddeadaning as ive got a ktec), and fitting harnesses, a few questions though. how much are harnesses? wots the difference between 3 and 4 point, will the rub and wear on stardard...

right im fed up of poxy clio exhausts dropping down in the middle, im thinking of welding a very small bracket somewhere on the underside of the car and using that, has any one done this/ advise it? ta daf

heard that the temperature sensor was on the mirror on the valver just wondering if this is the little nobbly thing underneath the one of them?

im trying to swap a nearly new set of 17 oz superlegras what other fitments are the same??am i right in thinking vw are?if so whats a golf gti forum site, cheers kids

just ordered some of this three stage stuff, whats the correct application for this? how often should it be applied?thanx

rite not sure if the clio is to go, just want some hints on prices its likely to get,its a 1995 n reg done 65 000, garaged, blue,full electrics, full leather , full k-tec ktr exhaust 2 months old, full service history, mot till september, 12 months tax. momo race s wheel, and gear knob, interior...

just thinking i dont see very many clios about, does any one know how many 16valves were built? phase 1 and 2 and how many 172s and cups.

think im going to buy a set of these in 17s tommorow,wot do people think?what offset should they be to go on the car and does any1 have any picture with them on a valver that they can send to me please at mailto:welshboy007@hotmail.com">welshboy007@hotmail.com

wot pcd wheels and offset do i need to have on my valver when i get my new 17s, its quite low and on kahns at the moment?any help would be great,ta

i am selling my kahn wheels which are 17s and just over a year old,have a few scratches but not bad, am selling them to a mate and i told him 400 quid, he nearly bit my arm off, is this a good price kids?

my god this thing was fast. i know i didnt stand a chance just thought it would be a laugh,it was an evo4 rs.hoho how i love fast cars wooping my ass

right i need some help ,is this road angel gps, worth having, i know it picks up gatsos etc but will it pick up a bloke stood on the side of the road with a radar gun, doing speed checks?

any idea where i can get some williams dial/ clocks from and how much it is going to be?is it possible to wind them back to the correct reading as well, i know ur not meant to do it.

i started last nite to fit my new white dials,ive done the three oil guages and the look good, they all light up,and the level gauge and the temp work but the oil pressure doesnt.any ideas? maybe loose connection

out on sunday and they were doing speed checks on the usual bit of 30 road, had pulled 2 people over one on one side and the other on the other, one was a 16v, went passed doing 30 and then gave it the big boot, me grinning till i turned round and came back up the road and he pulled me, asked me...

i thought i had a set of white dials ordered for my 95 reg valver until today when the bloke phoned and said they dont fit sagem dials, whys this ?any1 know, ive sent an email direct to lockwood to see if theyll start making them for this model. the standard dials ahve to be the ugliest in the...

right having just bought a white dial kit for my n reg valver ive got out the pod in the middle of the dash with the oil gauges in it and rekon i can take the original dials out from unscrewing the back, but hot do i get the main speedo dials out,ive taken the top dash off and unscrewed the 2...

does any1 have any advise over which sort to get?how much?is it worth getting a gps system so that you can download info,any past experiences,i want something that pics up gatsos, hand held radars etc.ta guys dont wanna get fryed getting caught whilst pushing on down the motorway

just had the car back now with the service done and the full ktec exhaust and de-cat pipe on and its a joke, i know people told me it was loud, but theres loud and LOUD the things unbelievable /deafaning, i think i can hear some sounddeadaning cuming up, would the best place to put this be in...

my car has just gone to the spanner man for a full service and full exhaust,can someone please tell me where the oil filter is in the engine bay and is it hard to get to? also one of the mechanics has bought a 172 cup to go with his twin turbo subaru legacy, and tells me hes gunna give my a...

just bought an exhaust system for my valver from k-tec and it came today along with de-cat pipe and i must say that the service they give is excellent along with their advice and recomendations, not like some other suposidly (spelling) modified car accessory store. I will definately be buying...