Search results

theres 1 dizzy cap the 52 mm struts are again only used on 1.2's and 1.4's

the ABS ring will have been damaged by incorrect fitment.

yeah mate they are awesome. I had 20 of them in series and I got 101bhp extra at the wheels on my 804cc ren 4.

switch is on the underside of the box, pull the passenger wheel off an dth earch liners and you can see it easily, its green. short it with a paperclip turn the ignition on and se if the lights then work. if so you need a new switch.

yes they will fit and no theres no other caliper used on the 16V. Only the lowly models (1.2 and 1.4) had to suffer the shite bendix.

arb bushes will be the knock, dodgy wheel bearing will be the ABS and speedo issue.

depend son the age of it, the later integrated set up 10 mins, the early ones you need to either cut the floor or drop the tank.

you can do it easy enough sitting still rev it to about 4 when its dropping down tap it and it will pop and bang. Mine has a standard system and pops like a mofo, no flames though

very true, the Renault tuning industry is shite. A laughable joke to vx, ford, vw etc

if its the outer it can be replaced with the shaft on the car. Renault even sell the tool to do it for about 30 quid.

I fixed mike f's which had similar problems. He had been to renault, new loom, new coil packs twice etc etc. His would cut out randomly. I told him let and expert look so he gave it to me, sorted. Been fine for a week now, normally it cut out about 15 times a day. here the link to the...

lol ok edde whateva if you read the instructions or even the box with any set of discs its tells you to remove the oil coatign before use.

erm why not remove the opil coating with brake cleaner/carb cleaner/meths before burning it off when braking?

you got gay drilled/vented discs on there?

a slider will have siezed.

pish easy. drain box oil and coolant remove radiator and fan dissconnect heater matrix pipes underneath undo the gear link rod from the box (13mm nut and bolt), drive out offside shaft roll pin, undo dog bone. Depending on age unclip the lambda wire whip the bonnet off, battery out and...

the rolling code is the correct term.

normally castrol, i used to go nick the 55litre drums with some mates when they weren't looking.

wtf is a hopping code? Who uses that terminology? Only rolling codes where used in the late 90's they have gone back to static codes as the transponder keys are now used.

get the washer and go to smileys or wherever and make muse of their 12 quid oil change deals they have, give them the new washer to fit as well, saves you and the drive/street getting covered if you don't know what your doing.

no its not illegal. Only illegal to have 2 different sizes on the same axle apart from in an emergecny. Thus you cannae drive about for 6 months on a space saver! Thousands of fwd cars run wider tyres on the front on the road, especially the drag queens.

if they are bcp's then they are ngk's so thats nto a problem unless they were damaged or liek you say not tightened but you'd hear that.

so it would seem the plugs are the only logical conclusion then cap'n. What make are they?

so it was fine before but not now?

yes without the box, don't wanna plonk on a 16V or a JB1 if the right box is there.

gaskets about a fiver matey, for some reason they decided at the factory not to fit most of them properly so they leak from new. New gasket ont here and your laughing, easy job as well. As for the running problems it could be a million things, if the plugs have a gap that you can fit a...

Indeed Dougal, indeed.You coming down this weekend? I need that box mofo. i'll send the bus stop biker after ye otherwise!

nay they dinnae wee man. Trust The H mofo. The single electrodes are better, you can feel it without us even getting into an argument about spark shrouding etc, we need Craigy poo in here for a decent argument anyway. Also still waiting on ma free stuff!

I only run BKR6EY's. Ben surprised you run the twin electrodes mofo

fecks sake dan that cars always been a heap, crash it properly and be gone with it. Checked the CTS output? You will need to go a nice run to get the cat cleaned out as it will be saturated, this new gaff yer working in, has it a got a fueler? If so wire it up and it lean to clean the cat.