Search results

I want to see if I can locate my old Clio. Registration was RK04 LFU. Last known location was the Weston Super-Mare area. Anyone know where it might be? Thanks!

I'm no car journalist, however I thought I would share my opinions on the new Clio 200T which I have had over the last 4 days. Renault UK delivered the car to me to be used for the French Car Show at Castle Combe for “Hot Laps”. I used it for both commuting and on circuit covering a total of...

http://www.ebay.co.uk/itm/2005-RENAULT-CLIO-RENAULTSPORT-182-16V-BLACK-KTEC-EXHAUST-AND-INDUCTION-KIT-/330882996461?pt=Automobiles_UK&hash=item4d0a29d8ed A mate is selling up.

Renault R26 - Engine oil filter fitted during a service by a well known "specialist". We will not be naming the particular company who carried out the work on the car. If the customer decides to name and shame, that is up to him! Engine has completely seized solid!

Cooksport’s Forged Megane Mk2. Cooksport have built a range of Renaultsport road and race cars, but we have never really showed our work on this forum. As some of you may know, Cooksport currently maintain and support car number 66 in the 2012 Elf Clio Cup Championship. In 2011 Cooksport built...

As above, too busy looking at the damage to see which it was!! Front end looked pritty bad Was just going on the back of the recovery truck!

http://pistonheads.co.uk/sales/1947835.htm Perhaps remove the stickers, but really nice!

Are there any differences between the 1*2 and 197 flywheels (197 flywheels seem to be quite tricky to get hold of!). Looking to get a lightened flywheel for my 197, probably be get a standard one lightened. Thanks Josh

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=180504934155&ssPageName=STRK:MESELX:IT#ht_500wt_1182

Inferno clio, private plate. You also had work done at SJ Cooks not long ago. Always see you parked up in kingswood too! Nice little blast :)

http://cgi.ebay.co.uk/2004-RENAULT-CLIO-RENAULTSPORT-182-16V-SILVER_W0QQitemZ330420024411QQcmdZViewItemQQptZAutomobiles_UK?hash=item4cee91745b#ht_536wt_1167

Is there any radiators which are a correct dimension for an ITB'd 182 (off a different car e.g saxo?). I too skint to shell out on a custom rad atm, so i need to find an air con rad and water rad which are shorter. Any ideas?

On a mk 2 ph 1 1.2 where is the best place to flush the powersteering from. Friend of mine thought that tank was the windscreen washer tank... lol! Thanks

I have had a search but couldn't find anything. Has anyone re-routed the air con pipes on a 182/172 so they are not in the way of the trumpets. Anyone know of a company who are able to modify air conditioning pipes etc.? Thanks

I have done a little search, i have read ben ps guide which seems pritty good. Does the exhaust mani have to be taken off to drop the box out?

Ok, well im starting to loose patients with the clio now! The high pressure power steering pipe broke (where it bolts onto the front of the gearbox,) in around Feb. This was replaced by renault for £700 quid. I then came to the conclusion that the reason for this was the engine mounts were...

Is a 1.2 mk2 ph 2, TDC sensor the same as a 182 TDC sensor? Thanks

I read somewhere that it can be done by elongating the bolt hole in the hub. What about elongating the holes in the coilovers, surely that will be easier and a little safer? Can anyone think of a reason why i shouldnt do it? Thanks

There may be a thread about this already, but i couldnt find it. The car has a second hand k-tec ITB kit on it. The previous car which had the kit, was live mapped at interpro (near bristol). I know this is a difficult question to give an accurate answer for, but how much roughly will it...

I have had a CF bonnet on my car for a while now, i will soon be fitting bonnet clips. Just wondering if anyone has done this and found any problems will drilling though the CF and then through the fibreglass. Also the small skrews/pop rivets which will hold the slider onto the bonnet...

The flame red 172 thats stripped out with a cage on coilies. Nicely done car. Anyone on here?

172 cup with white wheels, and white stickers down the doors. I was in the silver 182 with carbon bonnet and black wheels.

I wonder if u could get a 197 spoiler to fit a 1*2. What would it look like, photoshop anyone?

Had a look on search before anyone asks, but im not gonna sit here and look for hours on end to get my answer. Are the heads interchangeable between the ph1 172, ph2 172 and the 182? But which has the best block out of the 172's and 182 and which is the best head? E.g will a 172 ph 1...

Thought it would be funny to put it into reverse at traffic lights and jumped his car backwards pretending to reverse into me. Nice Cliosport.net sticker in the rear window. Hope u feel that u achieved a lot.... of that was before burning it off into the 30 zone at whatever speed. Well done.

If i run the car without the second lambda connected. Will it run the same as if it was connected with the emissions light on. I have made a decat, do i need to put the lambda in or can i disconnect it? Thanks

Hi, i have a custom Longlife exhaust, im thinking of getting a decat. If the Emissions light is on, does it affect the running of the car? Will it put it into a different ECU map? I know this question has probably been asked before, i just cant find it on search! Thanks Josh

Some chav decided that my car was a trampoline. Needs a new bonnet and i have a creese in the roof. I havnt upset anyone or done anything to deserve it. Such a piss take when i clean it twice a week to keep the body work tip top. Now im gonna have to try and find the money to sort this...

Looked nice, stripped out rear? Good choice, liked the badges.. calipers and disks. Yozza aswell. Very nice attention to detail. You parked next to the 182 (silver)

I have put GAZ coilovers from K-tec onto my trophy. The sach suspension was lowered by 30mm on KTEC springs. The GAZ coilovers were set higher than the trophy suspension was and was scrubbing. It does it on almost any lock applied. Anyone got any ideas? Will the GAZ be changing the camber or...