Search results

Or summer for those of us who live on the other side of the world ;-) I am coming to the UK for 3 weeks work in November so maybe I can pick a 2nd hand one up when I am over there. They seem to sell pretty quickly though.

Do you mean the 98RON map - or does it come with a base map ?

Its been a good several years I suspect since my 182 has been 'plugged in' and given a proper tune or system check by a Renault service centre. Is there much likely to be gained from this, or would I be better off putting the money towards an RS Tuner and doing it myself along with the...

I want to replace the balljoints on my wishbones, rather then purchase the entire item from Renault. Can someone confirm these are the correct ones with the 12mm bolt - I have a standard Clio 182...

Perfect, thankyou

Hi there, I am in the UK for work and looking at bringing back a Whiteline ARB for a 182 and some other goodies back with me to NZ. Does anyone have a close idea of the length and weight of this item so I can check I can get it back okay as checked luggage. Thanks !!

It's the Milltek backbox I'm interested in. Well if I get it, will post up my opinion on it I really just wanted to see if people thought it would fit.

Yes, this is the problem. I would need to import something from the UK/USA and it costs big $$. This is 2nd hand, if I can get it at a resonable price and then add a few hundred $$ for the labour to fit, then I am winning :-)

I'm hoping to be able to get an exhaust specalist to modify this Mountune Milltek muffler from a Ford Focus XR5 to fit my 182. Dimensions are - 550mm long, 300mm wide, 150mm deep, 70mm inlet, 50mm outlets, 100mm tip diameter The tips are quite large, but I might be able to utilise them also...

So if I were to source a 2nd hand set out of a Honda Torneo Euro complete with the subframes/rails - ( some of these cars have the Trendlines in them). Would they fit straight in to my 182, or do I need to buy some Recaro/Clio rails as well ? Sorry if a dumb question....bear with me :-( I did...

Would be a custom job using two mufflers a bit like this - http://www.borla.com/products/proxs_muffler_part__400481.html ...and then some tips. They have an offset inlet and centre outlet. Would it work ? Getting some of the more mainstream aftermarket exhausts into NZ is expensive, so looking...

I am making one of these and its time to decide what filter to put on the end. Is there a general preference or is it much of a muchness :-) Am thinking ITG Maxogen, Pipercross or Apexi.

I have factory seats and steering wheel. Does this guide also apply to my problem, or should I be looking elsewhere ? http://www.cliosport.net/forum/showthread.php?630252-GUIDE-Complete-Guide-to-SERV-Airbag-Light-removal-Aftermarket-Seats-Wheel

The Samco piece does look nice though :-)

Does anyone make a one piece silicon hose to do a DIY induction kit along the lines of the KTec system. Or do you need to buy the Samco 90deg bend and then add on a metal piece down and around in front of the battery ?

CAD ?

My 182 has a K&N Apollo air filter - came like that when I bought it ( have original airbox also). It has a cold air feed, that appears to plumb back into an original plastic pipe that sits down below the passenger side headlight. Do I need that there, or can I do a better job on the cold air...

I checked the relays and gave them all a squirt of electrical contact cleaner and still the same fault. I've now noticed that when the faulty indicator is trying to work there is a very faint buzzy sound each time it trys to indicate coming from somewhere up near the relays. Maybe from the black...

I recently used a Rug Doctor ( semi-wet vacumn) to clean all my upholstery. The next day the drivers side indicators start fading away after a few seconds, and I notice I have also lost my spotlights/foglamps. Seems too much of a coincidence..... is there some wiring somewhere that may have got...

Feel free to reccomend some experts :-) Thanks !

Awesome advice, thanks ! So Axial Rod/Tie Rod x2 and Track Rod ends (L&R). These are as well as steering rack bushes, or are they the same thing ?

I've just put powerflex bushes into the wishbones, so maybe just get the ball joints would be more cost effective now. I've only ever really used KTec in the past. Any other web-based options I can look at for purchasing this stuff ? Not many options down in New Zealand !

Hey there, My 182 has 170,000kms on the clock. Want to freshen it up a bit and get it handling like it did when it left the factory :-) Have allready done Solid engine mounts Powerflex bushes - dogbone, front wishbones and front anti roll bar. Running Eibach Sportlines and planning soon to...

Yes, looking at that option. Koni's with Eibach Sportlines seem like they would be a nice upgrade. I live in NZ, so not as much choice as you chaps enjoy over there but will ask around :-)

Ahhh...interesting, there is my problem then ! It is under warranty so if they have replaced with the incorrect shock then need to get it sorted. So KYB is what I need. Thanks very much guys.

My 182 has had both its rear struts replaced with Boge Turbos ( which I think is the correct shock ?) recently by its previous owner. However it seems very wallowy in the rear. Without much effort I can move the back of the car up and down very easily through a decent amount of suspension...

Yep, the rubber is looking pretty cracked on both sides. Can you buy just the insert, or do you need whole new mounts and any tips on where to buy ? I live in NZ, so probably going to have to be online. Looked on Ktec and couldn't see anything. Thanks

I am considering a Milltek system - catback. Thanks for the advice.

Car has standard exhaust but the tail pipes hang too low and poke out to far, any tips on what could be causing this ? I am thinking of upgrading soon to an aftermarket system, so if I need to replace any engine/exhaust mounts then I want to do it all in one hit. Thanks !

Hi, As per title....looking at some TE37's in this size. Car is standard height at the moment, but in the future also considering some Eibach Sportlines Any advice welcomed, thanks !