Search results

Nice one.

Swelch Forgot to put in a tip when cutting the pipe. Fit the jubilee clip in the position where the pipe needs cutting and tighten to the hose slightly, Use a very sharp knife for a good edge and use the clip as a cutting guide.

Tuesday afternoon we had a power failure at the farm and because we are on ISDN the phone line just went dead.

We have some new products for the 1.6 16v, which over the break I am hoping to put on our web site. They include. Induction kit, cam conversion, inlet manifold and ported head conversion. These mods will be universal to all models of 1.6 16v Clio Megane Laguna and Scenic.

Cheers Rich

Yes. Its a Renault ECU developed by Renault sport in France for use on Group "N" competition cars. I hope this clears some of the confusion surrounding this issue. The ECU is a complete swap item not a plug in and reprogramme procedure which superchips use. Ultimately both ways will give the...

Rhys How can you say the viper kit improves the power and accept the rolling road figures yet do not accept that the figures you got for the inlet manifold are correct or am I getting confused with the results posted. Were all the results that you posted run on the same day at the same rolling...

We do a 6 hose kit for the 16v Clio which covers all of the water hoses except for the bottom hose, they are available in Blue, Red, Yellow and Black. Our current retail price inc vat is £158.63. Cliosport price inc vat is £142.76. Blue is our std colour all other colours add 10%. Hose kit pics...

The 19 16v manifold does not have the support mounts at the pulley end of the manifold meaning you can not support the alternator bracket. The air by pass inlet is also in a different position.

One problem we have come across quite a few times now has been the steering rack mounting rubbers. You can tell if they are worn by having somebody turn the steering wheel while you look down the back of the engine at the rack to see if it moves in the mounts before turning the wheels. Some...

I have a set of reconed calipers which have only been used for 1 month. £40 for the pair no exchange. Hill Power 01530 273633

The actual rack unit is the same but the steering arms coming out are longer on a Williams to take account of the wider wheelbase.

We already have a throttle body conversion for the old shape 16v Clio there are a couple of pics on our site http://www.hillpower.co.ukwww.hillpower.co.uk It is the 172 and 1.6 16v that we are now looking towards.

Black is a colour that absorbes heat surely?. Heat retardant shiny aluminium reflects heat. http://www.hillpower.co.ukwww.hillpower.co.uk

If you are going to fit a williams exhaust manifold you will also need the down pipe and cat as they are different to the 16v and will not match up. The 16v manifold design of 4-2-1 was homologated for the Williams rally car as it was found better for torque on acceleration. Although ugly the...

I have currently got a kit for the 1.6 16v engine in development now. I have already fitted the kit to a Clio although this was done in conjunction with a cam kit so I can not realy asses how well it works on a standard engine as yet. Any takers?. I have some pics but they are not excellent, if...

Dont know the lengths just kon it wont fit. Mounts are different.

No

A note of warning for 85mm piston dia. You are realy going to struggle to get a head gasket to seal between the bores when they become so close you will have to have a one off gasket made to a very high spec. Dont forget you are now going to be asking the gasket to seal at much higher combustion...

The ignition service kit is available in all its parts seperately. email me for a price. The kit I have put together includes a set of Magnecore 8mm H.T. leads hence the price. http://www.hillpower.co.ukwww.hillpower.co.uk

At Hill Power we now have a relocation ind kit for the Clio Which moves the filter out of the engine bay. Was the question "best induction kit for performance"? The kit does not need the bonnett scoop for the system to work properly I have just fitted a scoop to mine to help with cold air flow...

We did indeed repair the above engine. We completely rebuilt the engine again, replaced the clyinder head and sorted out the engine management sysyem fitting a fully programable Lumenition system. The engine spent about a month on the dyno testing various different tweeks and mapping work. The...

Surley if a reply can be posted on a forum an e-mail can be sent. We are not evading the issue of prices on our web site and there are now some on. As I get the chance there will be more on there.

http://www.hillpower.co.ukwww.hillpower.co.uk We have recently made some new additions to our tuning range and now have more pictures on the site as well. Shortly we will be making an induction kit for the 1.4/1.6 16v engine, vehicle range Clio, Meganne, Laguna and Scenic (currently in...