stevo172-RWD
ClioSport Club Member
clio 172 rwd
Got a problem with blower fan.
Tried two panels all display works.
Can hear all the servos moving when changing air flow direction.
Have power to fan wiring.
Have checked fan works ok even another.
Tried 3 resistor packs all same .
No fan on any speed.
Iv tried bridge pins 1-5 and the fan comes on full any ideas?
Iv in tapped the loom in front all the way looks ok.
Had to wire in 1 30 amp wire to fuse.
Could all resistor packs be faulty?
Would you nomaly get volts from the other wires in the plug? As far as I can tell.
There's 2 black earths
2 live with 12v
And 1 with 5v?
Tried two panels all display works.
Can hear all the servos moving when changing air flow direction.
Have power to fan wiring.
Have checked fan works ok even another.
Tried 3 resistor packs all same .
No fan on any speed.
Iv tried bridge pins 1-5 and the fan comes on full any ideas?
Iv in tapped the loom in front all the way looks ok.
Had to wire in 1 30 amp wire to fuse.
Could all resistor packs be faulty?
Would you nomaly get volts from the other wires in the plug? As far as I can tell.
There's 2 black earths
2 live with 12v
And 1 with 5v?