ClioSport.net
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
The_Pirate
ClioSport Club Member
Golf R
Still canny get over that you've owned this since new Steve lol.
172 cup, Impreza P1
No excuses now that the weather stopped me working on the car. Best £30 I've spent! 
Not that I needed it today but this weather is out the norm for Glasgow! 99% of the time it's pi5hing down.
Other jobs completed today were dash removed to get the sound deadening all out from behind it. Looks much better now but still a lot of wiring that I don't know if I'll touch as I'll probably make an ar5e of it and spend weeks trying to sort out! Lol
Some pice of the completed and primed cage platforms too.
Finished the oil return for the turbo as well which look straight forward but fowls on the downpipe so that will need modified.
And lastly trial fitted the home made vernier pulley but still need to tap it but don't have an intermediate M8 and these things are hard so I'll borrow one in work.
Still need to make an extension for the actuator rod to mate up with the rod end as with the rotation of the turbo to accommodate the oil drain and turbo outlet means it won't line up by some margin. I have a cunning plan though so should be all good.
All for now but more to come in the coming weeks!
Not that I needed it today but this weather is out the norm for Glasgow! 99% of the time it's pi5hing down.
Other jobs completed today were dash removed to get the sound deadening all out from behind it. Looks much better now but still a lot of wiring that I don't know if I'll touch as I'll probably make an ar5e of it and spend weeks trying to sort out! Lol
Some pice of the completed and primed cage platforms too.
Finished the oil return for the turbo as well which look straight forward but fowls on the downpipe so that will need modified.
And lastly trial fitted the home made vernier pulley but still need to tap it but don't have an intermediate M8 and these things are hard so I'll borrow one in work.
Still need to make an extension for the actuator rod to mate up with the rod end as with the rotation of the turbo to accommodate the oil drain and turbo outlet means it won't line up by some margin. I have a cunning plan though so should be all good.
All for now but more to come in the coming weeks!
172 cup, Impreza P1
Chra's?
172 cup, Impreza P1
The centre section of the turbocharger
Is there a limit of tilt? It is currently sitting about 30deg of the vertical.
172 cup, Impreza P1
Still awesome as ever! Home made pulleys look the tits! Any idea on when you want it running for? I need a mk2 boost friend for KH
Cheers mate, hopefully will have it ready before the end of the summer. Can't wait!
I had mine at about 25 degrees and it was pooling the turbo 
it has to be vertical. I made the mistake if getting it vertical with the engine on the stand so wasn't how it sat in the car.
Drop me a PM with your address mate and ill send out those dephasers tomorrow.
it has to be vertical. I made the mistake if getting it vertical with the engine on the stand so wasn't how it sat in the car.Drop me a PM with your address mate and ill send out those dephasers tomorrow.
172 cup, Impreza P1
Thanks mate.
Ok, get you. I'll get one of these to change the route slightly and make the housing vertical.
Thanks for your help on this!
172 cup, Impreza P1
Meant to put a link in
http://www.ebay.co.uk/itm/160911640632?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
http://www.ebay.co.uk/itm/160911640632?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
197
what ecu did you put in after you put the 225 head on it?
Trophy Turbo :)
Ohhhh lordy
172 cup, Impreza P1
197
where did u get that mate?
172 cup, Impreza P1
Scoff at EFI Parts.
197
so os that just a plug and play?
172 cup, Impreza P1
Sorted the oil drain to maintain the turbo body to be as vertical as possible. Bit tight but worked out ok.
Also drilled and tapped the dephaser pulley to fix the pulley to and welded up the end of the inlet cam shft to stop any oil trying to reach the dephaser which is no longer there along with turning 5.3mm off its length to make it the same as the exhaust cam.
How the pulley looks complete
Need another one made now then I can get it all timed up.
Also drilled and tapped the dephaser pulley to fix the pulley to and welded up the end of the inlet cam shft to stop any oil trying to reach the dephaser which is no longer there along with turning 5.3mm off its length to make it the same as the exhaust cam.
How the pulley looks complete
Need another one made now then I can get it all timed up.
looking good mate they pulleys look awesome
You're quite clever aren't you?
Last edited:
172 cup, Impreza P1
Cheers, quite pleased with them I must say.
Lets not get carried away, don't be fooled by the glasses! Lol
Does that clear the cambelt cover?(assuming you've already checked!!!)
I have 4 to send you now!
I have 4 to send you now!
172 cup, Impreza P1
Good question Dan. I may need slimline cap head screws. I'll check tomorrow as the weather was too nice to be stuck in the garage today.
Ah result!
I bet it doesn't do too bad against the scooby
172 cup, Impreza P1
Turbo oil return looks smart mate! So the turbo also isn't tilted anymore?
Cheers mate, yeah pretty much vertical or as close as possible anyway.
