What's new
By:
Filters
ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • When you purchase through links on our site, we may earn an affiliate commission. Read more here.

197 brembos on a 182 conversion questions



simondavies89

simondavies89

  clio 182
Hi,

im thinking of getting parts ready to upgrade the brakes on my 182 for this summer and have seen people putting 197 brembos on their 182's.

what additional parts and modifications would be needed for the conversion and can you still retain using standard 182 size discs?

cheers
 
K

-KarL-

ClioSport Club Member
They clear on 16"

110126122606421647532590.jpg
 
George182

George182

Yup - easily clear the callipers (have a look in my project thread)

If you are planning to just use 16" wheels then you can use 300mm discs (Scenic discs fit straight on)

Then you just need the correct bracket and bolts - simples.

with 280mm discs, 20mm spacers and some calliper machining they fit under 15'" williams speed lines :D
 
Kelv

Kelv

  XC90, 330d, Trophy’s
George182 said:
the 300mm discs conversion like the one linked above won't for certain.

280mm might with spacers - but you'd need to make some measurements of the wheel etc to see if its feasible.
Click to expand...

no doubt that they wont fit under 15's, but I thought it may give Simon food for thought and help him a little... somewhow.
 
Kelv

Kelv

  XC90, 330d, Trophy’s
wildwood 4 pot kit fit under 15" 2118's with ease, or atleast that have done on mine, and the misses old 182cup packed car over the years.
 
simondavies89

simondavies89

  clio 182
cheers guys i will start looking into it, my wheels have different offset from normal due to them being off a swift, not sure if that gives me a slight clearance advantage or not. george182 it was your project thread that has made me think about the brake upgrade, your setup looks realy nice. il have a look into the willwoods. do the willwoods require different discs or still use the standard clio size?
 
George182

George182

simondavies89 said:
cheers guys i will start looking into it, my wheels have different offset from normal due to them being off a swift, not sure if that gives me a slight clearance advantage or not. george182 it was your project thread that has made me think about the brake upgrade, your setup looks realy nice. il have a look into the willwoods. do the willwoods require different discs or still use the standard clio size?
Click to expand...

It depends which kit you get iirc, some kits are 295mm discs and others use standard.
 
C

Chip-mk1

  182/RS2/ Turbo/Mk1
Ive got 300mm and 5 pots under 15" OZ F1 on mine, but they required a 30mm spacer to fit, which is about 15-20mm more than I would have liked ideally, but with lots of power the brakes are so important to me its even worth sacrificing handling slightly.

With 280mm mine would fit under 15" oz f1 with no spacer.



I want to find some 15" wheels that will clear them on 300mm with a 15mm spacer, so at some point im going to round a load up and see what I can work out.
 
simondavies89

simondavies89

  clio 182
i must be on the wrong forum haha. if my 2118's are 7x15 with 32 offset does that mean i have more clearance than normal, abit confused when it comes to offset
 
M

MG cup

  Cup In bits
Chip-mk1 said:
Ive got 300mm and 5 pots under 15" OZ F1 on mine, but they required a 30mm spacer to fit, which is about 15-20mm more than I would have liked ideally, but with lots of power the brakes are so important to me its even worth sacrificing handling slightly.

With 280mm mine would fit under 15" oz f1 with no spacer.



I want to find some 15" wheels that will clear them on 300mm with a 15mm spacer, so at some point im going to round a load up and see what I can work out.
Click to expand...

ATS cups are spacious.

EDIT: OP, I tried a few and with your offset (if all 2118's have the same inside profile) you would get away with 10mm spacers, probably best to get 16mm as they're the smallest hubcentrics to fit iirc.

post 26

http://www.cliosport.net/forum/showthread.php?694771-Clio-big-brake-conversions/page2

Dont read the rest its Chip flexing his mathematics muscles ;)
 
Last edited:
C

Chip-mk1

  182/RS2/ Turbo/Mk1
MG cup said:
ATS cups are spacious.

EDIT: OP, I tried a few and with your offset (if all 2118's have the same inside profile) you would get away with 10mm spacers, probably best to get 16mm as they're the smallest hubcentrics to fit iirc.
Click to expand...

They dont really look it TBH, the spoke seems to start coming in very soon, will have to try and find one in a sensible offset to try though.

Comp MO I was thinking, or maybe cav cesaro.

Whatever it is, its going to have to have no "dish" to it that is for sure.
 
M

MG cup

  Cup In bits
Chip-mk1 said:
They dont really look it TBH, the spoke seems to start coming in very soon, will have to try and find one in a sensible offset to try though.

Comp MO I was thinking, or maybe cav cesaro.

Whatever it is, its going to have to have no "dish" to it that is for sure.
Click to expand...

My mate has 305mm disks and ap 5110's iirc with somewhere around an et30 offset. Look the b****cks on his mk1 golf but I'm not sure they would on a Clio, nor your later choice.
 
l33th3tr33

l33th3tr33

Speaking of cups, I've been looking at the aluline cups, 7J with a 28mm offset. Are they much different to the ATS cups in terms of inner diameter? Ie would I be able to fit the 197 caliper inside on a standard disc?
 
C

Chip-mk1

  182/RS2/ Turbo/Mk1
MG cup said:
My mate has 305mm disks and ap 5110's iirc with somewhere around an et30 offset. Look the b****cks on his mk1 golf but I'm not sure they would on a Clio, nor your later choice.
Click to expand...

TBH im far more interested in clearance than looks.

Id run teddy bear wheels if I though they helped TBH

post-7-1042496501.jpg
 
M

MG cup

  Cup In bits
Chip-mk1 said:
TBH im far more interested in clearance than looks.

Id run teddy bear wheels if I though they helped TBH
Click to expand...

I meant to say ATS DTC's, used by a lot if the fiesta ST championships. Nice strong wheels supposedly despite the looks.
 

Attachments

  • image.jpg
    image.jpg
    168.6 KB · Views: 263
C

Chip-mk1

  182/RS2/ Turbo/Mk1
MG cup said:
I meant to say ATS DTC's, used by a lot if the fiesta ST championships. Nice strong wheels supposedly despite the looks.
Click to expand...

Those look promising!

Will have a bit of a look into that.

Best thing about those, is I could get some for the front and they dont look *that* different to the OZf1 so I could still run the f1 on the back, that way I would only need to buy about 8 wheels rather than 16.
 
C

Chip-mk1

  182/RS2/ Turbo/Mk1
Hmm, looking from a different angle I might still struggle TBH

3_4_2.jpg


Really need a picture from the inside looking out not the other way around which is all I can find!
 
M

MG cup

  Cup In bits
Yeah I can't help but they're spacious as said, a lot smaller step inside than F1's and 2118's have. The spoke bows out too to accommodate the calliper with big offsets.
 
C

Chip-mk1

  182/RS2/ Turbo/Mk1
MG cup said:
Yeah I can't help but they're spacious as said, a lot smaller step inside than F1's and 2118's have. The spoke bows out too to accommodate the calliper with big offsets.
Click to expand...

Would certainly be a good option to look into, especially with regards to them looking like skinny ozf1 spokes anyway :)
Thanks for the tip!
 
simondavies89

simondavies89

  clio 182
George182 said:
Yup - easily clear the callipers (have a look in my project thread)

If you are planning to just use 16" wheels then you can use 300mm discs (Scenic discs fit straight on)

Then you just need the correct bracket and bolts - simples.

with 280mm discs, 20mm spacers and some calliper machining they fit under 15'" williams speed lines :D
Click to expand...

have you had callipers machined before? where could i get them done, i could mayb get them done at work but not sure

is 280mm the standard disc size?
 
simondavies89

simondavies89

  clio 182
any one no of any where else to get these brackets for the 280mm disc setup? or anyone have the design for them with dimensions and i could get some made up at work mayb, cheers
 
You must log in or register to reply here.

Similar threads

MarcB
Renault Grand Scenic 300mm
Replies
1
Views
269
Clio_fool
Clio_fool
G
182 master cylinder. 197 upgrade?
Replies
6
Views
733
VenomUK
VenomUK
N
Clio 182 Upgrades (turbo, pistons etc)
Replies
0
Views
493
nick beach
N
S
Laguna hubs on the Clio Williams
2
Replies
69
Views
2K
scuba45
S
TheBandit
The Bandit | Monaco 172
2
Replies
47
Views
4K
TheBandit
TheBandit


Top