ClioSport.net
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
Mk1 F4R
Good work mate, you sticking with the old style nuts in the topmounts as they are going to make a mess of the nice anodized finish, hope they send out the new ones asap
Can i get a passanger ride at oulton please
Can i get a passanger ride at oulton please
daveski
ClioSport Club Member
Stunning progress, are you going to be at any of the shows in the summer?
daveski
ClioSport Club Member
Looking forward to seeing it at FCS if you make it 
Mk1 F4R
Cheers
I'll probably be at FCS in it, nothing booked or paid for yet though so will have to see.
Insured as of tomorrow
You can park next to me if mine makes it lol :rasp:
Mk1 F4R
So does that mean i got to sit on my billy tod lol
Come on its not that far off (i think)
Ohhh yes, so you did! Best buy a ticket then.
Sorted insurance first thing this morning so I'm covered as of tomorrow. Couldn't get tax today so thats a job for after work tomorrow.
Had a windscreen fitted at lunch time
Which allowed me to put all the wiper mech, wash bottle, scuttle etc back on
Got some brake fluid from Halfrauds (I love my new trade card!) and bled them through. This made the car driveable so I had a little go up and down the road, grin
Excuse the state of all the panels, they look terrible, but I had to get my priorities right and have it running first.
Front end is a bit low still, that needs lifting. The good news is that it drives
Back to work tomorrow so progress will slow a little, getting there though
Had a windscreen fitted at lunch time
Which allowed me to put all the wiper mech, wash bottle, scuttle etc back on
Got some brake fluid from Halfrauds (I love my new trade card!) and bled them through. This made the car driveable so I had a little go up and down the road, grin
Excuse the state of all the panels, they look terrible, but I had to get my priorities right and have it running first.
Front end is a bit low still, that needs lifting. The good news is that it drives
Back to work tomorrow so progress will slow a little, getting there though
TVR Cerbera
lookin good mate
Mk1 F4R
How are the topmounts now you have driven it up the road, was told today on the phone the "new""new" style nuts are in transit and should be here when the ash clears then they will send them straight out. my guess is you wont get them for next tuesday 
JDM Dc2
New boost, i mean Induction hose i see? lol
Glad its up and running now mate!
Glad its up and running now mate!
How are the topmounts now you have driven it up the road, was told today on the phone the "new""new" style nuts are in transit and should be here when the ash clears then they will send them straight out. my guess is you wont get them for next tuesday
An immeasurable time in the future then? Lol.
TrackCar & F30 330d
Bless her, she does look tatty as fooook from the front. Glad its all working nicly after putting it back together though
Thanks
Done about 100 miles in it now, all seems good. Such a good laugh and makes me grin like a kid!
With the pressure off for Oulton a little now that the car's running, I got chance to give the Megane a wash and put my new plates on too, i joined the T*PHY club
And glued the sunroof into the Clio. It was nice driving round in the sun without!
Done about 100 miles in it now, all seems good
. Such a good laugh and makes me grin like a kid!With the pressure off for Oulton a little now that the car's running, I got chance to give the Megane a wash and put my new plates on too, i joined the T*PHY club
And glued the sunroof into the Clio. It was nice driving round in the sun without!
TrackCar & F30 330d
Oooo i like the plate
Lol at the wheels on the sunroof
Lol at the wheels on the sunroof
JDM Dc2
really cant wait till wednesday now!!!
you running all glass windows now i take it?
you running all glass windows now i take it?
roll on wednesday!!
towbar for the trophy?
also what time you boys getting there for to jump a garage?
towbar for the trophy?
also what time you boys getting there for to jump a garage?
Last edited:
what times early though :rasp:
haha i understand
it'll be a bloody good one at that in that tin can...
it'll be a bloody good one at that in that tin can...
Yeah sometime soon, think we're about due one ^.
Chopped the 12" Mongoose tip off the backbox before and replaced with a bit of 2.5" stainless. I cut it to the same length as the standard tip and it looks a bit long I think, so will probably take an inch or so off at some point.
Got the RS2's on the front too and just about got them bedded in. Very impressed so far
Did the tracking this morning. I wasn't far out by eye, just a bit of camber needed taking off the one side.
Oil and filter change before wednesday and that'll about do it for Oulton. Fingers crossed
Chopped the 12" Mongoose tip off the backbox before and replaced with a bit of 2.5" stainless. I cut it to the same length as the standard tip and it looks a bit long I think, so will probably take an inch or so off at some point.
Got the RS2's on the front too and just about got them bedded in. Very impressed so far
Did the tracking this morning. I wasn't far out by eye, just a bit of camber needed taking off the one side.
Oil and filter change before wednesday and that'll about do it for Oulton. Fingers crossed
'Daz Clio Cup' on here has made a set of alignment bars which bolt together around the car, quite a riggy looking contraption but it works perfectly. Then put the relevant rim diameter into his spreadsheet and it gives me a figure for whatever degree of camber I want to achieve. 17mm difference top to bottom from vertical would have been 2.5deg, we settled at 15.5mm so slightly less than 2.5. Hope that makes sense, a picture would have helped.
