4 pot options

[Cupman29]

Thinking about what options there are for 4 pots that will fit under 15" wheels.

1) wilwoods?
2) megane 197/225 brembos?
3) 406 brembos?
4) anything else?

Also, what size of spacers would be needed for each to make them fit both my et37 superlegera and 2118's?

Cheers for any help!

 

[Mr R.]

Im also thinking about a big brake kit, im running 20mm spacers. Found this kit.


http://www.balancemotorsport.co.uk/products.asp?partno=CMB0156&gclid=CJq92pHz2rkCFUXKtAodVzQAUg

 

[Ph1 Tom]

What disc size are you looking at?

I've got a photo on my pc somewhere from a thread on here where a guy had the 300mm hi-spec kit under 15" 2118.

The wilwood 295mm kit fits without spacers iirc

 

[MartinR]

I have 406 brembos with 300mm scenic discs. But the wheels i have fitted are 16" superleggeras with ET37 and 16mm spacers, although you will get away with 10mm spacers providing you don:t mind minimal clearance.

Everyone says you cannot fit 15's with this setup but imo you can with the right wheel, i tried a standard 15" wheel and it only just caught the caliper.

I reckon (and will try if someone is local with 15"alloys) that they will fit providing there isn't too much of a lip on the inside of the alloy.

Maybe not the most helpful post.

 

[Mr R.]

They are not far from where i live, they used to be a night mare to deal with but that was years ago now.

It does say 16" wheels but they might fit under 15`s with spacers.

http://www.hispecbrake.co.uk/CL2300B4.html

 

[Fletcher]

I have been running Compbrake B4 4pots for about 6 years now. Great stopping power and pedal feel, and separate bells- rotors They fit under 15" wheels too.


http://www.compbrake.com/renault-clio-15-pr3-4-pot-295x24mm-rotors-brake-kit.html

 

[Cupman29]

I have 406 brembos with 300mm scenic discs. But the wheels i have fitted are 16" superleggeras with ET37 and 16mm spacers, although you will get away with 10mm spacers providing you don:t mind minimal clearance.

Everyone says you cannot fit 15's with this setup but imo you can with the right wheel, i tried a standard 15" wheel and it only just caught the caliper.

I reckon (and will try if someone is local with 15"alloys) that they will fit providing there isn't too much of a lip on the inside of the alloy.

Maybe not the most helpful post.

Martin, this is the setup I'm thinking about as I can make brackets to suit but don't know if it is possible at all to fit under 15" wheels so anything you could do to prove possible would be very helpful mate.

 

[Lawro]

I have been running Compbrake B4 4pots for about 6 years now. Great stopping power and pedal feel, and separate bells- rotors They fit under 15" wheels too.


http://www.compbrake.com/renault-clio-15-pr3-4-pot-295x24mm-rotors-brake-kit.html

They looked great too!

 

[Cupman29]

I have been running Compbrake B4 4pots for about 6 years now. Great stopping power and pedal feel, and separate bells- rotors They fit under 15" wheels too.


http://www.compbrake.com/renault-clio-15-pr3-4-pot-295x24mm-rotors-brake-kit.html

Bit more than I was looking to spend. Was looking at refurbing an old set of some sort if calipers and making brackets to suit standard discs that fit under 15" wheels hopefully.

 

[Ph1 Tom]

They are not far from where i live, they used to be a night mare to deal with but that was years ago now.

It does say 16" wheels but they might fit under 15`s with spacers.

http://www.hispecbrake.co.uk/CL2300B4.html

That's the kit I've seen behind 2118s. However the Compbrake kit is cheaper.

There's a 6 pot K-Sport kit for £855 with VAT, 286mm 2 piece discs.

 

[Cupman29]

That's the kit I've seen behind 2118s. However the Compbrake kit is cheaper.

There's a 6 pot K-Sport kit for £855 with VAT, 286mm 2 piece discs.

Sounds like there is some good options to fit behind 15's then.

 

[R-Sport.]

I running Alcons- but they were 2.5k- good job I didn't pay for them.

 

[Cupman29]

I running Alcons- but they were 2.5k- good job I didn't pay for them.

Where can I get some that I don't need to pay for?

 

[R-Sport.]

lol- Buy my race car they will come free

 

[bob the builder]

why the 4 pots?
some hc max discs and some ds2500 pads is all the stopping power you need

 

[Dan@SJM]

The hc/ds2500 are massively overrated IMO.

 

[BIGASH]

The hc/ds2500 are massively overrated IMO.

+1

 

[Cupman29]

why the 4 pots?
some hc max discs and some ds2500 pads is all the stopping power you need

Lol, you having a laugh? I currently have brembo max discs and pagid blues which are a very good combo but with soon 300+bhp and being used solely on track, I need some more stopping power.

Regarding DS2500, defo not a track pad and if you think they are, you're not trying on track.

 

[Cupman29]

The hc/ds2500 are massively overrated IMO.

+1

+2

Fast road setup at best!