ClioSport.net
Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
AG200 Rescue
- Thread starter Phil555
- Start date
massiveCoRbyn
ClioSport Club Member
Several
I think my 197 has a bit of a blow from the manifold. If it does, I really want the PMS one. And some Schrick cams lol
RS200
RS200
Picked the car up earlier today after a full day of work for a Stage 1 ceramic coating at a local detailing company called Razzle Dazzle.
Here’s a few pics of the car.
Also full interior valet including seats, carpets, headliner and seat belts.
Very happy with the result.
Sent from my iPhone using Tapatalk
Here’s a few pics of the car.
Also full interior valet including seats, carpets, headliner and seat belts.
Very happy with the result.
Sent from my iPhone using Tapatalk
welshname
ClioSport Club Member
The rear calipers aren't actually Brembo though...
RS200
Yeah. About 100 people have told me [emoji23]. It’s just a sticker!!!!!
Sent from my iPhone using Tapatalk
Ben Cook
ClioSport Club Member
Clio 200 (2010)
I assume these will fail an MOT as no fog light?
RS200
Yeah but I’m wiring one of the reverse lights to make a fig light.
Sent from my iPhone using Tapatalk
MarcB
ClioSport Club Member
182 Trophy & 197 F1
I would change the hose to a silicon hose which is a tight fit, These have a common fault of leaking at the washer jet and going down into the spark plugs which means new plugs and possible ignition coil.
RS200
MarcB
ClioSport Club Member
182 Trophy & 197 F1
its a common fault with the Mk3s and the twingo’s
just letting you know, I don’t thing it’s the jet but more the rubber hose that cracks as it’s perishable and the hose ends up leaking.
RS200
Cheers. I noticed water in there with the old jet. I’ll keep an eye on it. [emoji1303].
Sent from my iPhone using Tapatalk
RS200
I will be keeping the OE set.
The GT pair will be modified so that one of the reverse lights becomes a fog light. I will modify the harness and bulb holder to suit so I have 1 reverse light on one side and a fog light on the other.
Sent from my iPhone using Tapatalk
RS200
Few new parts arrived in readiness to fit.
Carbon fibre exhaust tips from Pure Motorsport.
RS gear knob from RPD. Weighs a ton this thing.
Stud conversion kits from Pure Motorsport. Bought the std and extended. I run 20mm spacers all around so the extended version will be used.
Engine & gear box mounts from K-Tec.
OE Renaulsport mat set from RPD.
Scorpion decat from a company called Freak Lizard.
Full Scorpion system from a company called Freak Lizard.
Toyo Sports manifold.
Carbon fibre exhaust tips from Pure Motorsport.
RS gear knob from RPD. Weighs a ton this thing.
Stud conversion kits from Pure Motorsport. Bought the std and extended. I run 20mm spacers all around so the extended version will be used.
Engine & gear box mounts from K-Tec.
OE Renaulsport mat set from RPD.
Scorpion decat from a company called Freak Lizard.
Full Scorpion system from a company called Freak Lizard.
Toyo Sports manifold.
Golf 7.5R & Clio 200
Proper!
RS200
RS200
You're not messing about!!
Fantastic!!
Cheers pal. Yeah it’s getting there. Should be looking and going well for the Summer.
Sent from my iPhone using Tapatalk
RS200
Another busy weekend working on the AG200.
GT rear lights fitted.
Std lights.
Lights removed and bodywork cleaned.
Comparrison between the two sets.
New lights in place. They do freshen the rear end up.
Next task for the lights is to wire one of the reverse lights into a rear fog light.
GT rear lights fitted.
Std lights.
Lights removed and bodywork cleaned.
Comparrison between the two sets.
New lights in place. They do freshen the rear end up.
Next task for the lights is to wire one of the reverse lights into a rear fog light.
RS200
Next on the list was to tackle the exhaust tips and replace them with the Pure Motorsport version.
Diffuser removed and a quick hose down.
Std tips removed and a test fit with the carbon fibre tips.
I used the below Evo-Stick product.
Tips in place and filled the channel on the rear of the diffuser with Evo-Stick. Once this dried I also used std silicon over the top. Had to use a fair amount to ensure a good solid stick as the tips do have a lot of slogger in the diffuser.
Tips in place.
Diffuser removed and a quick hose down.
Std tips removed and a test fit with the carbon fibre tips.
I used the below Evo-Stick product.
Tips in place and filled the channel on the rear of the diffuser with Evo-Stick. Once this dried I also used std silicon over the top. Had to use a fair amount to ensure a good solid stick as the tips do have a lot of slogger in the diffuser.
Tips in place.
Attachments
RS200
Onto the interior and a change of gear know.
Fitting the RS stainless knob.
Std knob removed with great force.............. LOL
Insert from the std gear knob needs to be removed and fitted to the RS gear knob. The insert ended u over the street when I flicked it out with a screw driver........
Part number for reference.
Gear knob in place.
Fitting the RS stainless knob.
Std knob removed with great force.............. LOL
Insert from the std gear knob needs to be removed and fitted to the RS gear knob. The insert ended u over the street when I flicked it out with a screw driver........
Part number for reference.
Gear knob in place.
RS200
Great updates Phil.
But - please, please, please, please, please, please put some clean number plates on
LOL.
I will. Going to get some ordered as I'll be putting my private plate on soon.
Stefan.
ClioSport Club Member
Lovely work
RS200
Cheers.
