Brake Bleeding Problem on 182

[shaprs]

Iv spent the weekend sorting my brakes out with braided hoses and new discs + pads (build thread coming).
Got everything back together and topped up the reservoir with new fluid and set about bleeding them up.
2 hours later (and some very tired legs!) and i cannot get the pedal to pump up at all!
I cracked all 4 nipples and left them to allow the fluid to run through nicely then nipped them all back up and started again, still nothing!
Im now at a loss with it! I even cracked the hoses at various points to see if the fluid was travelling through at each joint which it is.
Any help would be great as i could do with it back on the road for Monday! Sick of driving the missus' Diesel!!

 

[Mike@Rentech]

Master cylinder fault or needs pressure bleeding, failing that needs to be bled using clip.

 

[shaprs]

I was hoping it wasn't master cylinder as its not great to get at! What do you mean by bled with clip?

 

[RenMatt]

How exactly are you bleeding it ? suction or pressure bleed is best ,

 

[Dan@SJM]

I'm betting you've got air in the ABS Module. 2+ Hours of bleeding might see you through. Otherwise you need CLiP(Renaults computer) to bleed it.