Clio 16v head onto Williams bottom end

[thedylmeister]

ok i have a williams engine and my friend has just stuffed his valver with a stage 3 head, or 3 angle valve seats polished and ported with kent 280 degree valves on std hydraulic tappets.

will this fit onto my bottom end and will it give me more power / torque than the williams head ?

are the heads actually the same ?

and will the cams be worth having as kent states two different cams for the valver and the williams ?

 

[yeecup]

heads are different, cams are different. wouldnt bother tbh.

 

[Martin]

I'd have the valver head with those mods....

 

[midge]

use the valver head.

 

[stan*]

just put the cams in your willy head

 

[leekirlew]

The head won't fit will it? williams 2ltr, valver 1.8ltr? Or is it the displacement that makes the cc rather than the bore?

 

[midge]

the head does fit, im using a valver on my 2.0 block, the williams head has slightly bigger valves, its the crank that makes it 2.0, and a very slight overbore, as far as i know

 

[Rich1.2]

the valver head will fit no problem and see gains

 

[gunnergibson]

of course the head fits...lol veecup shouldnt post without the knowledge...iplaced a valver head on a willy btmend.. worksno prob.

 

[yeecup]

did i say it wouldnt fit??? i said it was different and that i wouldnt bother fitting it.