Audi rs3/Clio 172cup
Yeah direct fit. You can get them from mc racing also for similar money if tweeks don’t have stock
ClioSport.net
Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
Clio Cup Racer No28 Rally Car
- Thread starter Nathan Evans
- Start date
Chambers_RS
ClioSport Club Member
Clio 172 Cup&Leon K1
Can you actually see behind you with them?
massiveCoRbyn
ClioSport Club Member
Several
If you need to look behind you, you're not going fast enough 😂
Audi rs3/Clio 172cup
I’ll check tomorrow but I won’t be looking out them much 😂
Audi rs3/Clio 172cup
Big day!!!
On route to EFI now
On route to EFI now
massiveCoRbyn
ClioSport Club Member
Several
Looks lovely now it's together. Proper fresh looking in red too.
What do you reckon you'll see from it?
What do you reckon you'll see from it?
Audi rs3/Clio 172cup
Videos don’t do it justice of how loud the bangs are though the shifts. The car is mental
That sounds absolutely insane!
NorthloopCup
ClioSport Moderator
As said via WhatsApp mate - sounds epic! Good old pops and bangs remap 😂😂😂
massiveCoRbyn
ClioSport Club Member
Several
Sounds awesome. Can't wait to see it in action lad, should go really well.
Chambers_RS
ClioSport Club Member
Clio 172 Cup&Leon K1
Thats mega 👍🏻
Nafoff
ClioSport Club Member
Watched the above on FB, sounds bloody awesome mate
Audi rs3/Clio 172cup
Few more pics and videos of what’s been going on
Audi rs3/Clio 172cup
Black wheel spam. City wheels £20 a wheel job.
So an issue I assumed would come up after looking at the geo.
I’m running the standard cup racer pins which are set for an on the floor ride height, i obviously can’t run the car that low so I’ve managed to source some short pins which hopefully will be here this week.
As you can see in the pictures, rally suspension with long droop has the geo out a mile.
I have fitted some shorter ball joint carriers to help the angle of pin on full droop but once the shorter pins are here I’ll try both ball joints to see what works best.
So an issue I assumed would come up after looking at the geo.
I’m running the standard cup racer pins which are set for an on the floor ride height, i obviously can’t run the car that low so I’ve managed to source some short pins which hopefully will be here this week.
As you can see in the pictures, rally suspension with long droop has the geo out a mile.
I have fitted some shorter ball joint carriers to help the angle of pin on full droop but once the shorter pins are here I’ll try both ball joints to see what works best.
Audi rs3/Clio 172cup
Now we’re talking.
Volantch custom carbon steering panel ❤️
Volantch custom carbon steering panel ❤️
Audi rs3/Clio 172cup
More p**n
Twingo 1??
ClioSport Club Member
Twingo 133 Cup,
There worth more than my car 
Audi rs3/Clio 172cup
😂😂 Yeah it’s ok at the bottom but pretty close near the top. The ohlins it the other car were similar but we made bigger spacers on the inside to help it a little moreHave you even 1mm clearance from the rear inner arch with those springs lol.
Looks amazing
Audi rs3/Clio 172cup
Just when you think you’re on the home straight and nearly finished.
I also haven’t been updating the blue clio but this is the 3rd engine drop we’ve done in 2 weeks. Getting regular this 👎🏼
I also haven’t been updating the blue clio but this is the 3rd engine drop we’ve done in 2 weeks. Getting regular this 👎🏼
Audi rs3/Clio 172cup
Few issues but should still make oulton.
New crank dropped off and rods bought. Found that the head head been skimmed so the pistons had been coming into contact with the head, so thicker gasket is needed which is a pain, different cp ratio so will need mapping again.
We have found more issues with the engine now it’s apart but that’s for another day. 😂
New crank dropped off and rods bought. Found that the head head been skimmed so the pistons had been coming into contact with the head, so thicker gasket is needed which is a pain, different cp ratio so will need mapping again.
We have found more issues with the engine now it’s apart but that’s for another day. 😂
NorthloopCup
ClioSport Moderator
What. The. Actual. f**k!
Audi rs3/Clio 172cup
I’ll message you tomorrow. There is more 😂😂😂
robzracing
ClioSport Club Member
I'm led to believe that skimming these heads is not a good idea. I think that's confirmed it!
Mk1 1.8 16V Turbo
Hope you get it sorted for Oulton 🤞
Audi rs3/Clio 172cup
Engine is back after rebuild and a fare few ££££ lighter but hopefully this time it will last.
Started putting it back together this evening, all being well it will be running again tomorrow, then just mapping to sort out next week.
Whilst waiting for the engine I managed to fit the bumper and bonnet pods
Started putting it back together this evening, all being well it will be running again tomorrow, then just mapping to sort out next week.
Whilst waiting for the engine I managed to fit the bumper and bonnet pods
Twingo 1??
ClioSport Club Member
Twingo 133 Cup,
Now all you need to do with all them lights is a proper night rally!
Audi rs3/Clio 172cup
So the race engine went back in, came back out and a standard engine with grp n timing has gone in for the meantime whilst the race engine goes back to the engine builder again!
With such a crazy rush I managed to get the standard engine mapped on Saturday.
it produced good figures but in a straight race between this and my old blue one there is nothing in it. 212bhp I think not, more like 190ish
With so much work to do engine wise I had to fit the old dash back in as I didn’thave time to get the wiring done for the steering wheel controls. I didn’t fancy fitting the new dash with carbon centre panel to then have some switches changed to the wheel, instead of them being on the dash.
Then Borris announced an other lockdown.
I doubt the rally we go ahead but I have a track day on Wednesday and the livery is getting fitted tomorrow.
Some pictures of what’s been happening the past week
With such a crazy rush I managed to get the standard engine mapped on Saturday.
it produced good figures but in a straight race between this and my old blue one there is nothing in it. 212bhp I think not, more like 190ish
With so much work to do engine wise I had to fit the old dash back in as I didn’thave time to get the wiring done for the steering wheel controls. I didn’t fancy fitting the new dash with carbon centre panel to then have some switches changed to the wheel, instead of them being on the dash.
Then Borris announced an other lockdown.
I doubt the rally we go ahead but I have a track day on Wednesday and the livery is getting fitted tomorrow.
Some pictures of what’s been happening the past week
Audi rs3/Clio 172cup
So loads has happed already this week. Wrap is on but not finished as I’m not happy with the job. It looks great but the cuts aren’t up to standard.
First proper outing in the car at oulton yesterday and it didn’t disappoint. Looking forward to getting it out on a proper rally
First proper outing in the car at oulton yesterday and it didn’t disappoint. Looking forward to getting it out on a proper rally
Audi rs3/Clio 172cup
A few clips from the track day
NorthloopCup
ClioSport Moderator
Love it mate!
Audi rs3/Clio 172cup
Exhaust cam
Audi rs3/Clio 172cup
First competitive event in the new car on Sunday.
A very wet and slippy Donington Park.
After going out on the base wet set up on the reigers which still felt to hard we softened the clicks off even more and going into the last stage we were 3rd in class and 27th overall in a field full of R5 and WRC cars.
Unfortunately pushing to hard I lost it flat in 6th coming down crainers, I mannaged to get it back straight from being literally backwards, but when it gripped it sent me straight into the gravel.
The pace is there even on the lesser spec engine, but I have a lot of work to do set up wise and geo, the pms rear beam is coming off for a test too. And I couldn’t get the rear to handle how I’d like it.
A very wet and slippy Donington Park.
After going out on the base wet set up on the reigers which still felt to hard we softened the clicks off even more and going into the last stage we were 3rd in class and 27th overall in a field full of R5 and WRC cars.
Unfortunately pushing to hard I lost it flat in 6th coming down crainers, I mannaged to get it back straight from being literally backwards, but when it gripped it sent me straight into the gravel.
The pace is there even on the lesser spec engine, but I have a lot of work to do set up wise and geo, the pms rear beam is coming off for a test too. And I couldn’t get the rear to handle how I’d like it.
massiveCoRbyn
ClioSport Club Member
Several
You haven't ruined that lovely paint with gravel rash already have you 😂
Sounds like you were going well up until the off. Was a strong field from what I saw!
Sounds like you were going well up until the off. Was a strong field from what I saw!
Audi rs3/Clio 172cup
Yeah paint is all fine but that doesn’t bother me to be fair 😂 it will be battered before long.
Yeah was a strong field. Plenty of R5 and WRC.
Was happy with the pace after the first two stages. Can wasn’t nice to drive really on the set up I had at oulton. Will definitely get there with it with more time on the suspension and geo
Audi rs3/Clio 172cup
SS4 for anyone interested, was drying out a little here but was still greasy and so cold, around 2 degrees all day
Audi rs3/Clio 172cup
More time in the car yesterday at Oulton Park.
Had to turn the flat shift bangs off. The miserable bugger at javelin didn’t like it. Surprised I wasn’t sent home with 3 black flags 😂😂😂😂
Getting there slowly but still miles away from how I want the car driving especially under braking, unfortunately the diff technology in the stdsa gearbox isn’t the best but me and @NorthloopCup may have a modification brewing for that.
This video highlights the issue where I can’t stop the car from locking under braking, so you have to be real easy and progressive with it.
In theory you shouldn’t loose to much time braking earlier and softer as long as the corner speed stays the same but it’s a technique that needs more practice if we can’t sort the ramp angles on the diff.
Had to turn the flat shift bangs off. The miserable bugger at javelin didn’t like it. Surprised I wasn’t sent home with 3 black flags 😂😂😂😂
Getting there slowly but still miles away from how I want the car driving especially under braking, unfortunately the diff technology in the stdsa gearbox isn’t the best but me and @NorthloopCup may have a modification brewing for that.
This video highlights the issue where I can’t stop the car from locking under braking, so you have to be real easy and progressive with it.
In theory you shouldn’t loose to much time braking earlier and softer as long as the corner speed stays the same but it’s a technique that needs more practice if we can’t sort the ramp angles on the diff.
NorthloopCup
ClioSport Moderator
We will definitely get that sorted with the diff mate 😎
Audi rs3/Clio 172cup
And not sure how long I can keep 15” on the car doing track days. Will have to be 16” every time I think 😂
