Cliosport A,B,C timing belt & Dephaser change guide

[Philpooma]

Hello,
I have just joined this forum after taking a short break from my Clio Williams restoration.
I have a recently acquired 172 Cup which I have been going through to make sure that everything is A1, the next job that I need to do is the cambelt & Dephaser. I can borrow a gen Ren tool set for this and have done plenty of research so I think that I'm OK with the procedure, but after looking on this site I have seen reference to a step by step 64 page guide with images. However I have been unable to find anything on the site.
Can anyone help me by posting a link or similar or letting me know that this does not exist?

I have read plenty of horror stories about this procedure, but in essence it sounds OK, but to be sure I would love to see a step by step guide with images. Any help greatly appreciated
Cheers, Phil

 

[bloke]

there's a guide in the guides section...

 

[Philpooma]

I had a good look, but have been unable to find it, I tried the search feature but didnt get a definitive guide.
Clearly I'm being inept, maybe I shouldnt do the belts after all......If anyone feels sorry for me and can locate the guide that would be great.

 

[oreA]

http://www.cliosport.net/threads/cambelt-auxbelt-dephaser-pulley-guide.437872/

:innocent:

 

[nathanc29]

Doing exactly the same at moment found this useful

http://www.phoon.co.uk/cliosport/Workshop_Manual_3286a.pdf

And this

https://r.tapatalk.com/shareLink?sh.../Cambelt-Tensioning-Help.805400/&share_type=t

And this!

https://r.tapatalk.com/shareLink?sh...lt+Dephaser-Pulley-Guide.437872/&share_type=t


All of these are on here


Sent from my iPhone using Tapatalk

 

[jinjur]

The guys on here are better than any workshop manual when it comes to help.

 

[Philpooma]

http://www.cliosport.net/threads/cambelt-auxbelt-dephaser-pulley-guide.437872/

:innocent:

Brilliant, thanks very much. I'm embarrased that I couldnt find this, exactly what I was looking for.
I knew that anything that I was looking for would have been requested and posted many times before,
Cheers

 

[Philpooma]

Doing exactly the same at moment found this useful

http://www.phoon.co.uk/cliosport/Workshop_Manual_3286a.pdf

And this

https://r.tapatalk.com/shareLink?share_fid=191&share_tid=805400&url=http://www.cliosport.net/index.php?threads/Cambelt-Tensioning-Help.805400/&share_type=t

And this!

https://r.tapatalk.com/shareLink?share_fid=191&share_tid=437872&url=http://www.cliosport.net/index.php?threads/Cambelt+Auxbelt+Dephaser-Pulley-Guide.437872/&share_type=t


All of these are on here


Sent from my iPhone using Tapatalk

Really appreciate the reply thanks so much, exellent info

 

[Philpooma]

The guys on here are better than any workshop manual when it comes to help.

:wink:

Certainly looks like it . I usually try not to ask stupid questions on forums but looks like I have started off with a fail.

 

[jinjur]

Not a stupid question IMO when it comes to something as s**t scary as the belts on these.

 

[Louis]

Take it slowly and make sure you've got genuine tip-ex. Good luck.