What's new
By:
Filters
ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • When you purchase through links on our site, we may earn an affiliate commission. Read more here.

Dan@SJM's 1720v



Status
Not open for further replies.
Silent_Scone

Silent_Scone

  Evo 5 RS
Re: My Phase 1 ITB Daily Runner

Well spoke to Matt today and the car should be pretty much done by tomorrow. I won't be able to pick it up until Wednesday though. Caneet wait
 
Silent_Scone

Silent_Scone

  Evo 5 RS
Re: My Phase 1 ITB Daily Runner

So leaving early morning a few weeks ago, I finally took the car up to Tour De Force to get the loom fitted and everything up to a good standard. There have been a few stumbling blocks unfortunately as is always the way with this car!
A rundown of what has been done whilst it’s been there:
  • Fitted replacement wiring loom ( Neil Ph-reebone’s) + M6 temp sensor
  • New throttle cable
  • R26 Injectors (newer blue ones)
  • ARP rod bolts
  • EC1 ECU + calibration
  • Mocal catch tank
  • B14 Bilstein suspension
  • Geometry and corner weighting
  • Powerflex ARB bushes
  • Powerflex wishbone bushes
  • New track rod ends
  • New ball joints

The radiator fan on the pro alloy rad has also packed up so Matt has ordered one in for tomorrow before any mapping takes place. Also there was a problem with the crank sensor from the old Omex loom which was causing an intermittent misfire at 6,000RPM, so that’s being chopped out for a standard Renault sensor. The car seems to keep coming up with ways to prolong its stay with them, I think it likes it there!!
All in all though I’m glad these things are cropping up now rather than later on. Looking forward to trying out the Bilsteins and fresh suspension.
 
Silent_Scone

Silent_Scone

  Evo 5 RS
Re: My Phase 1 ITB Daily Runner

Nope, I couldn't
;)

And now I have!

Went up on the train this afternoon, got there at just gone 3. The numbers are in. 208BHP 178ftlbs.



And it drives/goes REALLY well :). Will put up some more info later and graph etc when it comes through (Matt's printer packed up).

After having an absolutely flawless drive back, I got back in it to start it up at the warehouse and it won't budge! Matt is sending me a starter solenoid as that's what he's pinning it on. So bit of a s**t ending to the day but overall it's an absolute brute now, really pleased with it

img1561xb.jpg
 
Last edited:
L

LewisTaylor

  Trafic 140dci
Re: My Phase 1 ITB Daily Runner

Nice one, good numbers, what's the spec of the engine (sorry if i've missed it somewhere :eek: )

Also gutted to hear about the starter motor, that's a b*tch to get too!
 
R

Russ_16v

  53 Clio's & counting
Re: My Phase 1 ITB Daily Runner

As per my text, what a torque figure! Glad it's all up together dude x
 
Silent_Scone

Silent_Scone

  Evo 5 RS
Re: My Phase 1 ITB Daily Runner

LewisTaylor said:
Nice one, good numbers, what's the spec of the engine (sorry if i've missed it somewhere :eek: )

Also gutted to hear about the starter motor, that's a b*tch to get too!
Click to expand...


I know, typical! I can't believe it decided to go now.

It's Jenvey 48/90s and 428 cat cams on cup setup :).


ph-reebone said:
Glad you've finally got there
Click to expand...


Cheers mate. (well nearly there!).


Russ_16v said:
As per my text, what a torque figure! Glad it's all up together dude x
Click to expand...


Woop, me too! Really pleased.
 
Silent_Scone

Silent_Scone

  Evo 5 RS
Re: My Phase 1 ITB Daily Runner

The car was so unbelievably stubborn. Even after all the problems so far what with the crank sensor dying, the CTS...this morning I get a call to say the alternator had dyed on the dyno as well! So Matt kindly took the one off his Cup.
 
BIGASH

BIGASH

Re: My Phase 1 ITB Daily Runner

Glad to hear you have got it back mate :) It was looking awesome when I was up at the workshop the other week! Sorry to hear you've had so many bit's breaking :( Great result with the power/ torque!
 
L

LewisTaylor

  Trafic 140dci
Re: My Phase 1 ITB Daily Runner

Great results then, not far off the power mine is putting out with 421's, really isn't much in it :)
 
Silent_Scone

Silent_Scone

  Evo 5 RS
Re: My Phase 1 ITB Daily Runner

So, managed to get the starter motor on that Matt kindly also took off his Cup after mine packed up the moment I got home. Bloke is a total diamond, really went the extra mile to make sure all was spot on.

Took the car out this morning; so nice to drive now. Graph below and torque band will give some indication as to why, such a hoot to drive :)

silentsconept.jpg
 
chrispy.clio

chrispy.clio

  TrackCar & F30 330d
Re: My Phase 1 ITB Daily Runner

Silent_Scone said:
I know, typical! I can't believe it decided to go now.

It's Jenvey 48/90s and 428 cat cams on cup setup :).
.
Click to expand...

What!!!! I didn't know you changed your ITB's?

Its a bl00dy great result tho mate. The car has turned into a right peach!

Where did you get your 48's from?
 
Silent_Scone

Silent_Scone

  Evo 5 RS
Re: My Phase 1 ITB Daily Runner

Cub 172 said:
Looking good, and good power. How are you finding the B14's? I have then on mine and love them...
Click to expand...

They seem very good so far. It's not actually stopped raining since I've had it back though :(

chrispy.clio said:
What!!!! I didn't know you changed your ITB's?

Its a bl00dy great result tho mate. The car has turned into a right peach!

Where did you get your 48's from?
Click to expand...

Cheers, I didn't - I quoted the trumpet diametre :eek:, I was assuming the manifold was the same. Wrongly

domsclio182 said:
Very nice looking graph,the 428's do give a very nice torque curve.
Click to expand...
They do, it really shows when you drive it as well.

I will be at Combe action day in the car for the first time this weekend, looking forward to it.
Also will be at Llandow on the 5th June for the CS Burpspeed trackday :)
 
R

Russ_16v

  53 Clio's & counting
Re: My Phase 1 ITB Daily Runner

Just though id add that I have seen this car a few times now, last time was before all the bosywork, on the previous engine and it was nice then, but after seeing it yesterday it is just stunning.

The paint looks fantastic, and the wheels go with it so well, the work TDF/Fred have done is top notch, and looks near OEM.

A stunning car (Even though my head hits the roof :eek:) and first dibs if you ever sell it!
 
Silent_Scone

Silent_Scone

  Evo 5 RS
Re: My Phase 1 ITB Daily Runner

Russ_16v said:
Just though id add that I have seen this car a few times now, last time was before all the bosywork, on the previous engine and it was nice then, but after seeing it yesterday it is just stunning.

The paint looks fantastic, and the wheels go with it so well, the work TDF/Fred have done is top notch, and looks near OEM.

A stunning car (Even though my head hits the roof :eek:) and first dibs if you ever sell it!
Click to expand...
Lol <3


I'm fitting some OMP subframes next week as I want the seats lower anyway. The runners on the Sparco subframes aren't ideal tbh. Might get your giant special legs in there next month lol ;)
 
dmallett

dmallett

Re: My Phase 1 ITB Daily Runner

OMP subframes made me seats wonky, so you might need to put some washers under the subframe above the exhaust tunnel.

I could just have a dodgy set though,
 
Silent_Scone

Silent_Scone

  Evo 5 RS
Re: My Phase 1 ITB Daily Runner

hmm cheers guys. Had heard this but thought it was just a fitting issue. They're the lowest ones I can really use with these seats without going silly low. Might have to get some fabbed this weekend.

Suppose I could use the OMP one for passenger worst case
 
Last edited:
Fletcher

Fletcher

ClioSport Club Member
Re: My Phase 1 ITB Daily Runner

dmallett said:
Did you level yours out? After fitting them i couldn't be bothered and still haven't found motivation too!
Click to expand...

Not really fella. I have purchased a thin metal bar that I keep meaning to fit to level them out but haven't got round to it. TBH I don't even notice it.
 
Silent_Scone

Silent_Scone

  Evo 5 RS
Re: My Phase 1 ITB Daily Runner

Well the cars back in the workshop this weekend. Whilst its there, I'm planning on:


  • refitting the OMP strut brace which I've since sand blasted and painted graphite grey
  • painting struts / de greasing engine bay
  • removing the sparco sub frames for the lower OMP ones for better driving position
  • removing remainder of fiber glass skinning on the bonnet so that it's not fouling the air filter.
  • Mock up roof lining for alcantara
Then fit new Michelin PE2s to front for llandow track day next month and sort tracking

IMG_3277.jpg


o4l1063.jpg
 
Status
Not open for further replies.

Similar threads

C
172 cup, what I wanted to do 20 years ago
Replies
6
Views
858
PerthRS
PerthRS
Typhoon
How to sort these couple of issues?
Replies
6
Views
453
alistairolsen
A
N
Trophy #199
Replies
15
Views
2K
neil a
N
ex-Chinese Dave
172 Cup fuel consumption
Replies
24
Views
2K
TC.
TC.
ex-Chinese Dave
172 Cup drivers window issue
Replies
10
Views
139
ex-Chinese Dave
ex-Chinese Dave


Top