Freshly pc'd cup! 56K beware!!

[makavelli]

I find it tiresome trying to do it all with a PC in one day, already done the car with the yellow, and white pad. Spreding it out over a few days would be better. VIBRATIONS LOL!!! I'd lean towards the blue for srp, but not tried it lol. We destroyed both yellow pads (4"spot and 6" today!!)

lol i know what you mean, my current method only involves 2 uses of the pc so luckily my arm hasn't shaken of yet lol

 

[Gaz_]

Yeah knows. This has been given the works now, so wont need the yellow pads and intensive polish again (like mine) I might try srp on mine with the pc in the next few weeks, i've heard a lot of comments (like yours above) of how well it goes on by pc

 

[makavelli]

Yeah knows. This has been given the works now, so wont need the yellow pads and intensive polish again (like mine) I might try srp on mine with the pc in the next few weeks, i've heard a lot of comments (like yours above) of how well it goes on by pc

yeah the pc really breaks the srp down, literally to the point where there is nothing much to dust off with the microfibre! my main problem when doing it by hand used to be the amount i was buffing off as i couldnt get the same breakdown effect when using hands alone

 

[SBV116]

Cheers for the comments guys! going to order gaz some new pads later, oops!!!

 

[BREMBO]

Mmm Cup, looks a really nice one, should spray the wheels black, then drop it a wee bit, or white wheels

 

[Gaz_]

been there done that with this one

Original is best

 

[SBV116]

Mmm Cup, looks a really nice one, should spray the wheels black, then drop it a wee bit, or white wheels

If it was any lower it would be never get anywhere! white wheels, are you having a laugh??? i want to commit suicicde when i clean these ones never mind white ones!!!!

 

[FiDoDiDo]

Looks ace, top work.

 

[Leeshez]

Smart

 

[Christopher]

pawwwwn.

great work

 

[DebV6]

Looks gorgeous!

 

[AlexS]

Looks spot on, love that.

 

[Rich]

I find it tiresome trying to do it all with a PC in one day, already done the car with the yellow, and white pad. Spreding it out over a few days would be better. VIBRATIONS LOL!!! I'd lean towards the blue for srp, but not tried it lol. We destroyed both yellow pads (4"spot and 6" today!!)

Nice work - You must have given it welly to kill the SFX pads, out of all my Cutting Pads the SFX ones I have are the ones that survived! Polishing or finishing pads are fine for SRP depending what you have used before it and how much correction you want it to give. The machine takes SRP to another level esp. as you can work it till it is nearly gone needing no removal and no danger of dust.

I think the vibrations must vary from machine to machine I hardly notice any with mine.

 

[Gaz_]

yeah vibrations arnt that bad, but after nearly a day on the machine i've had enough. 4" pad lost its velcro (sp) backing with steve lol. The 6" pad is ok, just a bit clotted so time for a new one.

 

[SBV116]

yeah vibrations arnt that bad, but after nearly a day on the machine i've had enough. 4" pad lost its velcro (sp) backing with steve lol. The 6" pad is ok, just a bit clotted so time for a new one.

Put bluntly, i hooped the job up! Honesty for you!