Is it possible to fit 5 stud wheels to a RS Clio?

[PRanger]

One for the ones in the know how.

I have a brand new set of 16" OZ F1's which are 5 stud pattern, these wheels are from Renault but not sure what Renault there were fitted too. Anyway I have a mate with a Clio Cup who is considering trying to fit them I've told him it's probably impossible so if anyone knows if he can then please could you point me in the right direction.
I'll give the wheel dimensions if it makes it any easier.

6.5x16
ET 50
PCD 108 x 5
Center bore 60,15

Original Renault Part number 7711216727
I'd provide pictures but you all know what they look like

If not I need to flog them takes to much room up

 

[JaredHasNoBrain]

My mate bought a 4 stud to a 5 stud converter thing (technical I know)
Was something like this: http://www.driftworks.com/nissan-4-to-5-stud-conversion-wheel-spacers-25-50mm.html
Thats with a spacer with it too.

 

[Spinksy]

you will need to buy/get made up some hub adapters that convert 5x108 into 4x100 with the correct centre bore

but be aware that the adapters will act like spacers so the wheels will be closer to the arches all the way around

 

[PRanger]

I thought using them on the Trophy but most likely be shot at dawn.

So really I would need to know what car they would fit and palm them off to them which is a shame as there a cracking set of wheels.

 

[Spinksy]

how close are they to the wheel arches in a mock fit (just mating the wheel to the hub) to the trophy?

 

[Lal B3N]

Is 5x108 to 4x100 even possible with adaptors? Do the holes not clash?

 

[PRanger]

how close are they to the wheel arches in a mock fit (just mating the wheel to the hub) to the trophy?

Not tried that yet but I can whip the wheel off tonight and get an idea.

 

[Spinksy]

Is 5x108 to 4x100 even possible with adaptors? Do the holes not clash?

not entirely sure tbh mate

Not tried that yet but I can whip the wheel off tonight and get an idea.

okay mate you will need the distance for the adapters is all

 

[Stu.]

Pretty sure these will be off a laguna. Seen some before in the scrappy! Thought I'd got lucky till I seen they were 5 stud.

 

[JP83]

Don't believe for the PCD you're after, it'll work.

Quick Google turned up these guys: http://www.performancealloys.com/HUB-and-PCD-Adapters.aspx

 

[Spinksy]

what about 2 converters?

say one to do 5x108 to 5x130, then 5x130 to 4x100?

but that will rely on a large amount of space between the wheel and arch...

 

[Lal B3N]

Probably stick out too far then and be talking a lot of money to get them to work.

Usually the smallest you can get is 15-20mm so theres already 40mm in adaptors.

 

[Spinksy]

Probably stick out too far then and be talking a lot of money to get them to work. Usually the smallest you can get is 15-20mm so theres already 40mm in adaptors.

I understand that mate

​Is the car lowered?