ITB'd MK1
would kill it. Mi16 205 is about on a par with a standard cup, maybe a bit lighter
ClioSport.net
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
would kill it. Mi16 205 is about on a par with a standard cup, maybe a bit lighter
hmmm the 205 weighs about as much as a bag of salted peanuts, dont wana start a dissagreement but a 205 mi16 is a QUICK car and it would see off a standard cup no problem
A
ashy_gtt
R5 172T on the rollers @ Motorscope
238bhp & 230lb/ft @10psi
http://www.youtube.com/watch?v=rdLvu_LGE9k
Got an in car vid but could get into trouble if I put it on youtube!
238bhp & 230lb/ft @10psi
http://www.youtube.com/watch?v=rdLvu_LGE9k
Got an in car vid but could get into trouble if I put it on youtube!
James5_GTT
ClioSport Club Member
R5 GTT
Very impressive figures Ashy my 5 used twice the boost to make that bhp figure LOL wish I could see the vid but can't view youtube @ work will have a look tonight though.
Astra van,Mk1 nova
great project mate! you've got skills, very impressed 
Adey.
ClioSport Club Member
nice one ashtray, good to see it going well now. might have to tap you up for some info/bits soon 
A
ashy_gtt
No probs Mr Ewok any time 
A
ashy_gtt
Brief Update, since building this engine the turbo has always had a slight leak from the rear seal. This meant that oil would weap onto the exhaust housing and burn off!! It was ok but sometimes after a good thrashing would smell a bit.
Anyway, I thought I'd buy a rebuild kit and get it sorted out!
Some pics.
And back together!
The glass blaster at work does a good job
All back together and all is well, no smoke and boosting well!!
Looking forward to some events this year!
Anyway, I thought I'd buy a rebuild kit and get it sorted out!
Some pics.
And back together!
The glass blaster at work does a good job
All back together and all is well, no smoke and boosting well!!
Looking forward to some events this year!
James5_GTT
ClioSport Club Member
R5 GTT
Top job, Ashy out of interest what turbo is that your using ?
Last edited:
A
ashy_gtt
Erm, its a SAAB T3 mate, off a 900 I think... Tbh it was just a spare I used to build the manifold and downpipe up but in the end decided to use it and its been great!
James5_GTT
ClioSport Club Member
R5 GTT
I have picked up a similar t3 turbo but of a cossie my rear housing is a little different to yours.
A
ashy_gtt
Just a quick update, the car drove 400 miles round trip, did 18 runs at Pod on the 29th (and the gearbox never faultered) with road tyres the best time was 13.8 @ 105mph.
Next stage is to whip the engine out this winter, bigger clutch, bigger injectors and a bit more boost. Should be interesting
Next stage is to whip the engine out this winter, bigger clutch, bigger injectors and a bit more boost. Should be interesting
A
ashy_gtt
Just thought I'd share that with you
A
ashy_gtt
stevo172-RWD
ClioSport Club Member
clio 172 rwd
Coming along good mate!
Power figs look good!
That turbo looks very similar to mine!
Power figs look good!
That turbo looks very similar to mine!
A
ashy_gtt
Nah she's not up and running yet mate, new ECU is here just need to find some time to get the loom built up and fit it all!!
That turbo's on its limit really its only a small 50 trim T3. I've bought a 2wd cossie turbo which is the next step, could do with finding a 4wd comp wheel and cover too but they are like rocking horse poo.
Its all good fun tho
A
ashy_gtt
James5_GTT
ClioSport Club Member
R5 GTT
Going for 300bhp then matey, what ECU did you go for in the end? Adaptronic?
Got any more pics of your 5 with the new bonnet on
Got any more pics of your 5 with the new bonnet on
172 Cup & Clio dci Van
i have a mint as fcuk set of rear lights for an r5 i found in my garage on the weekend!
anyone want them?
anyone want them?
A
ashy_gtt
Going for 300bhp then matey, what ECU did you go for in the end? Adaptronic?
Got any more pics of your 5 with the new bonnet on
Hi m8, aye 300bhp would be nice, no new pics really as the cars never really left the garage since Mallory!
James5_GTT
ClioSport Club Member
R5 GTT
Give you a fiver for them :rasp:
Look forward to seeing it this year @ Mallory again matey might pester you for a passenger ride:approve:
172 Cup & Clio dci Van
A
ashy_gtt
A
ashy_gtt
Mk1 F4R
Dash looks nice, loving the conversion too
Megane r26
awesome mate some real work gone into it by looks of it. Fair play to ya pal
A
ashy_gtt
Long time no update... But to be brief...
Put it all back together with the bigger turbo but my clutch wasn't able to hold anything more than 12psi of boost. So took it down to Pod in May last year and broke the bottom end. Spun a shell and welded it to the crank....
View attachment 56309
So whilst I re-built the engine I thought I'd also do some body work. The shell was rusty (rotten in places) so out came the grinder and welder.
First job was to repace the windscreen surround.
As you can see it was fairly useless.
So I chopped it out and welded a new one in place.
Next Job was Sills and rear Bumper mounts, I measured them up and got some new ones laser cut....
Job done...
Now onto prep and paint for the full shell.
Then off to the body shop...
Shell in Primer...
Got the shell back from the paint shop last weekend lookin lovely
And then had the chap from A1 windscreens in today to fit a nice new shiney windscreen.
So thats the last years work in 1 post... Still plenty to do but its gathering pace so hopefully be up and running again this year?!?
Put it all back together with the bigger turbo but my clutch wasn't able to hold anything more than 12psi of boost. So took it down to Pod in May last year and broke the bottom end. Spun a shell and welded it to the crank....
View attachment 56309
So whilst I re-built the engine I thought I'd also do some body work. The shell was rusty (rotten in places) so out came the grinder and welder.
First job was to repace the windscreen surround.
As you can see it was fairly useless.
So I chopped it out and welded a new one in place.
Next Job was Sills and rear Bumper mounts, I measured them up and got some new ones laser cut....
Job done...
Now onto prep and paint for the full shell.
Then off to the body shop...
Shell in Primer...
Got the shell back from the paint shop last weekend lookin lovely
And then had the chap from A1 windscreens in today to fit a nice new shiney windscreen.
So thats the last years work in 1 post... Still plenty to do but its gathering pace so hopefully be up and running again this year?!?
A
ashy_gtt
i need to speak to you at some point about boost
Rule of thumb is - The higher the better
A
ashy_gtt
Bit of an update, progress is slow, but I've started on the engine build:
F4R to 02J mounting plate fitted to block
Engine & box offered up.
Engine mounts made
Flywheel spacer machined.
Tial Wastegate purchased.
Plenty of Lube.
Crank in place, clearing threas.
Crank fitted, ARP bolts.
Pistons & Rods built up.
Botto End Built Up
Got all my new bits from Reno today, timing belt, new oil spray jets, seals etc... So hope to get the engine built up this weekend...
Then I can test fit it into the bay
F4R to 02J mounting plate fitted to block
Engine & box offered up.
Engine mounts made
Flywheel spacer machined.
Tial Wastegate purchased.
Plenty of Lube.
Crank in place, clearing threas.
Crank fitted, ARP bolts.
Pistons & Rods built up.
Botto End Built Up
Got all my new bits from Reno today, timing belt, new oil spray jets, seals etc... So hope to get the engine built up this weekend...
Then I can test fit it into the bay
