I thought AVO's were almost the same as AST money? Granted I've never really looked into them much!
ClioSport.net
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
sburrell's ph1 172 track project (maybe)
- Thread starter sburrell93
- Start date
Hi.
I do you good deal.
I do you good deal.
scotiamr2t
ClioSport Club Member
Mazda 2, Ph1 172
Less hen 1k so for an extra 100 so quid you can get new coilovers an specify the spring rates you want. Alternatively support a local racer an buy Fraser's :up:
Supercharged AG 200
Avo's look awesome :grin:
Shiny new ASTs look better [emoji8]
Nah they're shite
It's been a while. I bought some things.
Anyone able to explain shock dyno graphs? Because I don't have a f**king clue what this means
There's 2 sheets, both like that. I can't work out if that's for a front and a rear shock on each graph, or if it's only for one shock per graph showing softest/hardest damping settings. Even then, I still don't know how to read them lol!
Anyone able to explain shock dyno graphs? Because I don't have a f**king clue what this means
There's 2 sheets, both like that. I can't work out if that's for a front and a rear shock on each graph, or if it's only for one shock per graph showing softest/hardest damping settings. Even then, I still don't know how to read them lol!
I think that means they're on ninja settings.
Supercharged AG 200
Good purchases mate
Christ knows about the graph.....! Front just over 3/4 hard, rear up full and you'll have a blast around KNOCKHILL......
What spring weights did you go for ? I see 569lbs? Is that damper or spring weight ?
I had only good comments about the GHAs I had originally and those were road spec. Whilst the car felt flatter on the ASTs I couldn't fault the Gaz set up.... hoping the golds will be good as I have them on the new car!
Christ knows about the graph.....! Front just over 3/4 hard, rear up full and you'll have a blast around KNOCKHILL......
What spring weights did you go for ? I see 569lbs? Is that damper or spring weight ?
I had only good comments about the GHAs I had originally and those were road spec. Whilst the car felt flatter on the ASTs I couldn't fault the Gaz set up.... hoping the golds will be good as I have them on the new car!
Cheers mate, I'll give those settings a go on the 4th...if I'm ready in time!
The figures on the graph are damper rates. From what I can gather it's the compression and rebound figures for the softest and hardest settings on the dampers.
Spring rate wise I went for 450 front and 350 rear. Standard rates for the golds are 500/300 but I felt that was too soft on the rear for knockhill and 500lbs on the front would be pretty rough on the roads so tried to compromise. Will see how it pans out!
You taking your 200 up on the 4th? Sure I saw your name on the list.
Supercharged AG 200
No it's still in storage mate...... will be up to watch though...
I had 550 front, 650 rear for trophy.
6 month thread revival! Saw the light of day at the weekend for the first time in almost a year!
Nothing exciting mind you, just moved it to a new unit closer to home. I might actually make some progress on it now
Supercharged AG 200
Here was me thinking it was making an appearance on Thursday night !
View attachment 1331096
6 month thread revival! Saw the light of day at the weekend for the first time in almost a year!
Nothing exciting mind you, just moved it to a new unit closer to home. I might actually make some progress on it now
And here we see a typical CS track car in its natural habitat. A garage. On axle stands...
Tucked in way up the back, out the way!
So yeah, that's it in its new resting place in the new unit for now. Much bigger than the last place I was in. Plenty room to get it stripped down and do everything I've wanted to do since reshelling it.
But that aside, I actually worked on it last night!
Holes drilled for PMS top mounts and strut brace and test fitted it all. Picked the mounts up for very cheap ages ago and just recently replaced the bearings and wanted to get the brace before fitting.
So now that's done, I've decided it's aaaaalllll coming back out over winter to freshen it all up and give the bay a quick dusting of paint.
I feel a new (fairly long) to do list coming up...
Tucked in way up the back, out the way!
So yeah, that's it in its new resting place in the new unit for now. Much bigger than the last place I was in. Plenty room to get it stripped down and do everything I've wanted to do since reshelling it.
But that aside, I actually worked on it last night!
Holes drilled for PMS top mounts and strut brace and test fitted it all. Picked the mounts up for very cheap ages ago and just recently replaced the bearings and wanted to get the brace before fitting.
So now that's done, I've decided it's aaaaalllll coming back out over winter to freshen it all up and give the bay a quick dusting of paint.
I feel a new (fairly long) to do list coming up...
Or. You could just use it.
Don't be so sensible!
I can't be arsed getting it ready for the possibility of doing maybe one track day in it this year in truth. Not got a free weekend between now and October so by the time I actually got it sorted and MOT'd, there'll be barely any track days available!
May have impulse bought this yesterday...
Took it on as another little project to just clean up and have as a decent fun road car alongside the ph1. Has recaros, a very strong engine, and was cheap so couldn't say no! Will stick a thread up for it at some point.
Took it on as another little project to just clean up and have as a decent fun road car alongside the ph1. Has recaros, a very strong engine, and was cheap so couldn't say no! Will stick a thread up for it at some point.
Oh hai. It's been a while. I don't think this is the direction project threads are meant to go...
Think this is literally the furthest I've ever been from having a built car!
Painting soon, and hopefully make the engine look a little bit nicer than it currently does...
Think this is literally the furthest I've ever been from having a built car!
Painting soon, and hopefully make the engine look a little bit nicer than it currently does...
Ffs. Ill buy the harnesses back to help you out.
One million dollaz please. Rarer than unicorn shite those silver sabelts!
I'll make them depreciation free for you.
Out of date now eh? They only had 5 years left when you bought them....
Out of date now eh? They only had 5 years left when you bought them....
Being quite serious btw, I'd buy them back for what you bought them for. Never wanted to sell them in the first place as you know!
I'll have a think, I don't really want to sell them either now though lol! The silver belts look great in it...
The difference being I'll use them! Been having to commute in the flamer recently thanks to family car issues. Not as bad as I thought it would be tbh.
Thought yet?
I thought I had replied to you previously! I have indeed, I'd rather hold onto them if I'm honest.
If I didn't think I would have the car out this year I'd sell them but I do actually plan on getting it back track ready this year...unlike the last year or so...
If you've not driven that by 2019 then they're free
