TT QS
ClioSport.net
Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
Black gold 182
Re: Project Benga 16v 1.2 MK2
if your not sure about color for your wheels mine are stock black ones have a look at my thread
http://www.cliosport.net/forum/showthread.php?622104-my-black-1-2-dynamique
going to take some more piccy's tomorrow as i havn't updated for a little while all im doing now is eiback sportlines, ment to be the dogs dinner and color coding maybe a 182 rear bumper,
Deano
if your not sure about color for your wheels mine are stock black ones have a look at my thread
http://www.cliosport.net/forum/showthread.php?622104-my-black-1-2-dynamique
going to take some more piccy's tomorrow as i havn't updated for a little while all im doing now is eiback sportlines, ment to be the dogs dinner and color coding maybe a 182 rear bumper,
Deano
Re: Project Benga 16v 1.2 MK2
Hi mate, been searching for those, they don't do them anymore i don't think! Cannot find any at all! There is some on ebay for £200. but it's not a big brand, plus i don't want it lowered too much and 40mm apex shouldn't be too crashy
I'll prob invest in coilovers later on when I'm earning good money
Hi mate, been searching for those, they don't do them anymore i don't think! Cannot find any at all! There is some on ebay for £200. but it's not a big brand, plus i don't want it lowered too much and 40mm apex shouldn't be too crashy
I'll prob invest in coilovers later on when I'm earning good money
Black gold 182
Re: Project Benga 16v 1.2 MK2
dont go the apex route... read some reviews and you'll re think it so many people hate apex springs get some eibach sportlines not even much more and they make it just low enough to get rid of the arch gaps make it look nice and supposedly improve handling mine are in the post
dont go the apex route... read some reviews and you'll re think it so many people hate apex springs get some eibach sportlines not even much more and they make it just low enough to get rid of the arch gaps make it look nice and supposedly improve handling mine are in the post
BBS and Lowws...
Re: Project Benga 16v 1.2 MK2
Car looks good! Just colour code and lower it!
Car looks good! Just colour code and lower it!
Re: Project Benga 16v 1.2 MK2
cheers matey! Something will come along!
I'll have a route around and see whats good and think it through toniightdont go the apex route... read some reviews and you'll re think it so many people hate apex springs get some eibach sportlines not even much more and they make it just low enough to get rid of the arch gaps make it look nice and supposedly improve handling mine are in the post
cheers matey! Something will come along!Re: Project Benga 16v 1.2 MK2
Getting 172/182 seating aswell, about to hopefully win a bid on the rear ones.
Cheers mate! Yeah that's all getting done soon!!
Getting 172/182 seating aswell, about to hopefully win a bid on the rear ones.Re: Project Benga 16v 1.2 MK2
PM me them or something
please mate that would be greatshould be doing my springs this weekend if they arrive this week
PM me them or something Re: Project Benga 16v 1.2 MK2
Okay! So, did the centre cap diamonds in white, to go with the new wheels i got (which are offcially getting sprayed black) then done the bullets in silver! really needs a colour code now. getting done month or month after
By sleepy16 at 2012-03-07
By sleepy16 at 2012-03-07
By sleepy16 at 2012-03-07
Okay! So, did the centre cap diamonds in white, to go with the new wheels i got (which are offcially getting sprayed black) then done the bullets in silver! really needs a colour code now. getting done month or month after
By sleepy16 at 2012-03-07
By sleepy16 at 2012-03-07
By sleepy16 at 2012-03-07
clio / mondeo 2.2
Re: Project Benga 16v 1.2 MK2
your wrapping looks good matey, you got a linky to where you got the sheets from??
Ta
your wrapping looks good matey, you got a linky to where you got the sheets from??
Ta
Re: Project Benga 16v 1.2 MK2
Cheers mate! I could do alot better though, if you seen them in person they're awful haha! but here ya go :
http://www.ebay.co.uk/itm/160602196442?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Cheers mate! I could do alot better though, if you seen them in person they're awful haha! but here ya go :
http://www.ebay.co.uk/itm/160602196442?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
clio / mondeo 2.2
Re: Project Benga 16v 1.2 MK2
lol, just stand / sit further back..... always looks better then!! lol
lol, just stand / sit further back..... always looks better then!! lol
Re: Project Benga 16v 1.2 MK2
Little suprise here! bought some rear & front 172/182 seats(they arrive monday) but i fitted the rear seats... with alot of trouble because of one bolt. Basically there is a bolt which is down the centre of the rear seats, and previously before I had the car, someone has worn the bolt down, there for me being unable to undo it! The bolt was hardend aswell. so with a helping hand (dad) we pulled out the drill... and drilled right through the bolt! then knocked on the top of it, leaving the thread(another problem.) So the Mole grips came out, to get the tread bit of the bolt out... no chance, wouldn't move at all. so we drilled through it again, then decided were going to put a regular bolt through and then tighten it up with a nut. Job done. so here they are!
By sleepy16 at 2012-03-11
By sleepy16 at 2012-03-11
Little suprise here! bought some rear & front 172/182 seats(they arrive monday) but i fitted the rear seats... with alot of trouble because of one bolt. Basically there is a bolt which is down the centre of the rear seats, and previously before I had the car, someone has worn the bolt down, there for me being unable to undo it! The bolt was hardend aswell. so with a helping hand (dad) we pulled out the drill... and drilled right through the bolt! then knocked on the top of it, leaving the thread(another problem.) So the Mole grips came out, to get the tread bit of the bolt out... no chance, wouldn't move at all. so we drilled through it again, then decided were going to put a regular bolt through and then tighten it up with a nut. Job done. so here they are!
By sleepy16 at 2012-03-11
By sleepy16 at 2012-03-11
Re: Project Benga 16v 1.2 MK2
cheers! and i know, absolutely horrid haha! I blame my parents for curbing.
Re: Project Benga 16v 1.2 MK2
Okay, big change for the car!! Front seats are not in yet! hopefully next week they'll be in!! along with some door cards! I thank H4ml3t for the wheels, seats and door cards!
Car looks abit high because it was obviously jacked up, but after a sneaky test drive, it was lower. Defo need some coilys or lowering springs on the go! Colour coding soon also! Centre caps are also coming soon, the guy i bought them off forgot about them!
here!:
By sleepy16 at 2012-03-28
Before:
By sleepy16 at 2012-03-28
After:
By sleepy16 at 2012-03-28
By sleepy16 at 2012-03-28
Okay, big change for the car!! Front seats are not in yet! hopefully next week they'll be in!! along with some door cards! I thank H4ml3t for the wheels, seats and door cards!
Car looks abit high because it was obviously jacked up, but after a sneaky test drive, it was lower. Defo need some coilys or lowering springs on the go! Colour coding soon also! Centre caps are also coming soon, the guy i bought them off forgot about them!
here!:
By sleepy16 at 2012-03-28
Before:
By sleepy16 at 2012-03-28
After:
By sleepy16 at 2012-03-28
By sleepy16 at 2012-03-28
Ph1 Non Sport
Re: Project Benga 16v 1.2 MK2
Really like this!
Really like this!
Re: Project Benga 16v 1.2 MK2
and nice one man, good choice!
Thanks dude!!sick this is mate
and nice one man, good choice!I know right!? Lovin' it!
Cheers man!! Will look better once centre caps are on, colour coded and dropped. It will look mean!
Re: Project Benga 16v 1.2 MK2
on my next clean i will bud! getting all new tryes all round near the end of the summer though mate, when i nearly start drivin! car will be complete then too!!
on my next clean i will bud!
getting all new tryes all round near the end of the summer though mate, when i nearly start drivin! car will be complete then too!!
Re: Project Benga 16v 1.2 MK2
Must've missed this thread.
Nice car, glad you got rid of the blue sidelights. Only thing I don't like is the snap-off sticker, but I know they're popular so won't make too much of a fuss.
Good luck with the driving test, and see you around some time (good to see another member from Plymouth!)
Must've missed this thread.
Nice car, glad you got rid of the blue sidelights. Only thing I don't like is the snap-off sticker, but I know they're popular so won't make too much of a fuss.
Good luck with the driving test, and see you around some time (good to see another member from Plymouth!)
Re: Project Benga 16v 1.2 MK2
Yeah i took that sticker off the day before you mentioned it actually haha! replaced it with the CS URL sticker thanks again! and yeah definately!!
Thanks man!
Yeah i took that sticker off the day before you mentioned it actually haha! replaced it with the CS URL sticker thanks again! and yeah definately!!Re: Project Benga 16v 1.2 MK2
The guy i bought them off forgot to wack them in, they'll be here next week though so it's all good!
Re: Project Benga 16v 1.2 MK2
Well, yesterday with my dad, we got to work on the seats! 4 and abit hour job, tea breaks included! So got the old seats out, stripped the wires and new seat wires, then got down to soldering and wrapping individual wires with electric tape. We took time with soldering because that's the best way to do it imo! So seats were in, bolted ect ect. obviously i turned the airbags off before we took the seats out and didn't turn the car on during the job. But when it came to the time to turn it all back on.. turning the key i had the look on my face as if i s**t myself! But then, car was running, and no air bags K.Oed me, so it was a sucessful day for me and paps!
Here they are, in:
Not the best pic, you'll get another soon because door cards are coming next week, along with centre caps so the car will look more complete.
By sleepy16 at 2012-04-07
By sleepy16 at 2012-04-07
JDM Sticker Bomb you knowz it!
By sleepy16 at 2012-04-07
Well, yesterday with my dad, we got to work on the seats! 4 and abit hour job, tea breaks included! So got the old seats out, stripped the wires and new seat wires, then got down to soldering and wrapping individual wires with electric tape. We took time with soldering because that's the best way to do it imo! So seats were in, bolted ect ect. obviously i turned the airbags off before we took the seats out and didn't turn the car on during the job. But when it came to the time to turn it all back on.. turning the key i had the look on my face as if i s**t myself! But then, car was running, and no air bags K.Oed me, so it was a sucessful day for me and paps!
Here they are, in:
Not the best pic, you'll get another soon because door cards are coming next week, along with centre caps so the car will look more complete.
By sleepy16 at 2012-04-07
By sleepy16 at 2012-04-07
JDM Sticker Bomb you knowz it!
By sleepy16 at 2012-04-07
Re: Project Benga 16v 1.2 MK2
Yeah people were saying that, just to give the wires a wriggle then they should go. So may give that a try today! And the wirings got enough slack for the seats to move about, so no tugging is occuring and i will be checking on them for wearing and what not, cheers for your input!
Yeah people were saying that, just to give the wires a wriggle then they should go. So may give that a try today! And the wirings got enough slack for the seats to move about, so no tugging is occuring
and i will be checking on them for wearing and what not, cheers for your input!
Golf GTD
Re: Project Benga 16v 1.2 MK2
Looks decent mate, just get some tyre gel on those tyres!
I did the seats in my first car (1.2 like yours) and I could never get the connector to work right so i ended up having to solder the wires together and get rid of the connector, never had a problem after that.
Looks decent mate, just get some tyre gel on those tyres!
Yeah people were saying that, just to give the wires a wriggle then they should go. So may give that a try today! And the wirings got enough slack for the seats to move about, so no tugging is occuring
I did the seats in my first car (1.2 like yours) and I could never get the connector to work right so i ended up having to solder the wires together and get rid of the connector, never had a problem after that.
