Stu's Sunflower Ph1 172.

[Djw John]

It's alright I guess.

 

[deanoE30M3]

Not sure if theres doublers on the pics or just my phone 🤷‍♂️ heres a few more 😅
View attachment 1597084View attachment 1597085View attachment 1597086View attachment 1597087View attachment 1597088

what have you bought new or have you been able to save some parts and money..?!

looking great though, keep it up

 

[Stu.]

what have you bought new or have you been able to save some parts and money..?!

looking great though, keep it up

Bought as much as i can new over the years as i've found things. Anything used has been refurbished (power steering pipes etc as an example)
I also have x2 ph1's as donor cars and box loads of bits from around 10 years of saving bits/breaking them 🥲.
There will be alot of ph1 bits forsale when i've finished my pair 😅

 

[Stu.]

Few more updates, Getting time is always the hardest part! Replacement subframe/beam fitted. Power steering pipes on, new PS fluid bottle, coilovers/top mounts.
(Wishbones are temp!)
Alot of small bits in the bay in, Scuttle built up/all black bits ceramic coated by The Detailing Station and looking like new!
Likely forgotten about stuff but i'll just add a pile of photos 😅

 

[Stu.]

 

[Stu.]

Trying to get things as damn near on as possible 🤣 rear window stickers must have been chucked on by a random person at the time as none of the 5 i checked were the same. So stuck it in a similar place as best it would look.
New fogs fitted in coated surrounds also, the small details really do make it sharp 😎

 

[Krarl]

 

[Brigsy]

Great job. Where did you get the replacement vin sticker from, ren dealer?

 

[Stu.]

Great job. Where did you get the replacement vin sticker from, ren dealer?

Got them a while ago, sure the company was 'vin tags UK'

 

[Stu.]

Got a shift on it this weekend...interior is fairly getting on...And got to sit in the car for the first time since 2015 I think!?Will mix opinion i'm sure 👀
Have fitted ph2 grey carpets and Trendlines. Will likely get the doorcards trimmed in black alcantara to match the seats. Unsure if i'll run a rear bench or not yet but i'll price up a retrimmed bench also to match the trendlines.
Have fitted the trendlines without spacers to sit them lower, painted washers black to tidy up the holes in the carpets and to stop runners tearing the carpet 🤞Red front belts are a nice touch imo.
polished the speedo lense and put together a tidy cig lighter.
Steering wheel is temp for now, Have a brand new one in the attic but might also get one retrimmed all black.
Heres some pics!

 

[Stu.]

Couldn't resist sticking these on this morning. Sill protection stickers. I got x1 set made for my own car with the Renault Sport colours on in keeping with the ph1 theme, Thanks to my mate Scott for sorting these!

Still have some oem ones in stock if anyones after a set.

 

[Michaelfoz]

Looking tasty. If you need anymore of the paper mats give me a shout. I’ve got mountains of them atm a


Sent from my iPhone using Tapatalk

 

[Martin_172]

Fantastic! - love the sill protectors!

 

[JezzaMac]

Some pace on this build now [emoji102][emoji276]

Looking good mate!

 

[hopgop1]

What did you use to polish up the clock face plastic, or is it a new piece? Looks perfect.

 

[Paul172sport]

Mate...seriously blown away every time I look at your updates to the quality of your work. All the replated bolts and new clips etc. Will really set this aside.

Wish mine looked as fresh and amazing as yours. Sadly I lack your skills space and time

Well done and il be awaiting the ph1 parts for sale list haha

 

[Brigsy]

What did you use to polish up the clock face plastic, or is it a new piece? Looks perfect.

Mild cut with a da and compound cleans them up well, just like polishing a headlamp. I scratched mine by accident and recovered it in a couple of steady passes.

 

[Michaelfoz]

Hurry up


Sent from my iPhone using Tapatalk

 

[Stu.]

Suppose i should give an update...its not far off 2 years since the last one. Sure you will be pleased to know it runs and drives, And mot is provisionally booked 👀😆

Got the engine/box in November 22.

 

[Stu.]

Managed to get a pair of good rear quarter glass windows from breakers as they are NLA. Scott from Scott-Glaze perth popped in to get them in 🤙

 

[Stu.]

I feel this post needs its own section, Its so laughable....If you're up this end of the world and looking for interior work. AVOID SAMCO INTERIORS LIVINGSTON.
Absolute roaster, But in keeping with every disaster this car has endured, Heres what a 6 month wait on doorcards got me.

These are for the bin, Have got replacements 😅

 

[Stu.]

Next up, Lets fit the refubed hubs I bought ages ago...More problems.
Turns out the bearing were pressed in/out on the brake tabs 😅 so caliper carriers were hitting the discs....
Refurbed another set of hubs myself this time, Jobs a good'n.
Front brakes/hubs etc all built now.
The plan was to go brembos. Did get calipers machined for going on the pms brackets but ended up just going oem to get things moving.

Few underside pics, Got a NOS backbox heatsheild. Thanks Rhys!

 

[Stu.]

Ran out of room for pics, Have some more.

Had to move it outside to get a chassis out the back of the workshop for another project i'm working on 🙄 so here it is outside, Driven under its own power. First time in 8-9 years 😅

 

[Stu.]

Nearly upto date -

Got another set of doorcards done, This time by a company called Transcal. They are absolutely fantastic. Ben was a great help, Giving me samples to take away to get as close to the trendlines as possible. Here they are -

Got most of the interior back together now, Unsure on the flocked bits...but they will do for now. Steering cowl was still boxed from getting it all done, wrapped in the Sun news paper....2016. No page 3 👎
Stripped the dash vents down to paint them black to blend in a bit better with the dash.
Seats need a good clean, but this will all be done when its away getting detailed!

 

[Krarl]

I feel this post needs its own section, Its so laughable....If you're up this end of the world and looking for interior work. AVOID SAMCO INTERIORS LIVINGSTON.
Absolute roaster, But in keeping with every disaster this car has endured, Heres what a 6 month wait on doorcards got me.

These are for the bin, Have got replacements 😅
View attachment 1686436

View attachment 1686437View attachment 1686438View attachment 1686440View attachment 1686441

Did he let his dog do those?🤣🤣

 

[Stu.]

Got various wheels for this, Still unsure what to run. Got some 2118's i've yet to get tyres on. Also got the 16" f1's refurbed but no tyres as of yet 😅
Bought some evo corse fondmetals. They are insanely cool but just dont feel they are suited for this ☹️ so have a brand new set forsale if anyones looking!

And the most recent update as of lastnight. Finally fitted my brand new hella headlights...these have been in the attic for a few years 😅

So whats left to do now?
Rear brakes to refurbish/fit
Finish off the rear of the interior/bootlid wiring
Airbox/cooling fan and some misc engine bay bits.
Alignment/mot/detail.
last but not least, park up and never use it and start a new project 🤙🤣

Hope you have enjoyed the updates!

 

[Djw John]

Almost as much of a ride as you sir.

But this gets more action.

 

[Stefan.]

Damn that's nice

 

[Ant1]

Cracking job as always.

 

[Clio_fool]

Bloody lovely that is. Please don't bother putting tyres on the 2118's.

 

[Stu.]

Well damn. 9 years since its last MOT it got another one...
Still a long list of random bits to tie up but thank fk for that 🤣

Not gonna take that apart again, Thats for sure 😅

 

[Poopensharten]

Those new headlights are so f**king satisfying😂

 

[Kenich.]

This is the best, fair play for the effort Stu, paid off for sure!

 

[Ant1]

Well damn. 9 years since its last MOT it got another one...
Still a long list of random bits to tie up but thank fk for that 🤣

Not gonna take that apart again, Thats for sure 😅

View attachment 1689629
View attachment 1689630View attachment 1689631View attachment 1689632View attachment 1689634

8 grand here 😂🤷‍♂️

 

[Stu.]

Thats a decent deposit @Ant1 😝

Got Bilstein B14's for it this week so will need to get the suspension changed over soon, before its away to get detailed 🤦‍♂️

 

[Krarl]

Thats a decent deposit @Ant1 😝

Got Bilstein B14's for it this week so will need to get the suspension changed over soon, before its away to get detailed 🤦‍♂️

Ant is a messer anyway, he probably wouldn't get his big head in a PH1 these days👀👀🤣

 

[Ant1]

Ant is a messer anyway, he probably wouldn't get his big head in a PH1 these days👀👀🤣

Silly sausage.

 

[gudger12345]

8 grand here 😂🤷‍♂️

I have a ph1 which has both sills replaced and all the rotten material removed plus a full paint job.
plus lots of parts that i would sell along with the car

PMS Top mounts
PMS Shifter
PMS reinforced wishbones
Blackline LSD
New vibra techniq engine mounts
Power flex bushes - full car
Comptech 4 pots with floating disc's and housing
Cup spoiler
Brand new old stock Sabelt racing wheel
Recaro pole on john foz subframe
Roll centre kit
Whiteline rear arb
Bilstein B14's
clutch recently replaced
belts and dephaser replaced last year

Can always be tempted to sell if the offer was right

 

[Whisker biscuit]

Well damn. 9 years since its last MOT it got another one...
Still a long list of random bits to tie up but thank fk for that 🤣

Not gonna take that apart again, Thats for sure 😅

View attachment 1689629
View attachment 1689630View attachment 1689631View attachment 1689632View attachment 1689634

Well now that’s kinda nice 🤤

 

[davo172]

Needs OZ superlegs to be absolute perfection! But such top work sir you should be VERY proud, credit to ya😎