Soon to be the proud owner of a mk1 clio williams replica owner

[hot-hatch]

ewwwww ph3 with a ph2 valver bonnet.

not a williams replica
you can still make the narrow arch mk1s look and go well though, and that looks like a pretty straight one. Complete the set of RSI wheels (the 5 spokes you have on the rear) and get it lowered, then sort the bumper and lights out and it's got potential

rsi its got 5 of them but 2 are geting refurbed
lowerd it already is
bumper and lights are going to be done soon :lolup:

 

[sideways danny]

That's lowered

you can't get a bonnet bulge in a ph3 bonnet, and the ph3 front is ugly

 

[hot-hatch]

not bad for 100... but the only thing that has anything to do with a williams is the bonnet? especially since i dont think they did ph3 williams? need to get a new bonnet or some new headlamps

i have the williams bumper and lights

 

[hot-hatch]

That's lowered

you can't get a bonnet bulge in a ph3 bonnet, and the ph3 front is ugly

THAT TO LOW ! this car was scraping on the rear when i was bring it home i aint going any lower :lolup:

 

[sideways danny]

it's not too low, i use it every day like that with 200kg of tools in the boot

 

[hot-hatch]

it's not too low, i use it every day like that with 200kg of tools in the boot

too low for me im affraid i already have back problems lol

 

[Savi]

Nothing wrong with a Phase 3 front end

Not bad mate, far from a williams rep though. I think the RSi wheels are too small, get some 15's, either turbines or williams wheels. Dont go for a williams rep, just try and make it your own, but think clean and rust free, no exhaust if heat shield thing on the bumper for the exhaust either lol

Congrats on the new car

 

[Alastair.]

u sold your xsi yet mate? ive been after a project one for a while.

 

[hot-hatch]

u sold your xsi yet mate? ive been after a project one for a while.

yes mate its gone sorry

now main question

will a ph2 williams front end lights and bumper and grill be a straight fit ?

 

[Daz.]

Thats nasty! lots of different shades of blue there too - I'd have kept the pug all day long!

 

[iimushroomzii]

Yes it will fit. Just so happens i've got a "Williams replica" non runner you could buy? Got angel eyes, smoothed bonnet, grille, smoothed boot, smoothed doors and rear quarters. relocated filler cap.. ph1 valver interior. etc etc. Give me £300 and its yours.

 

[White16valver]

Have a look on clio16valver.co.uk as well - lots of Mk1 knowledge on there but be prepared to expect perhaps a small ribbing till you've got it looking shipshape lol

 

[Tyssen]

Hello and welcome

 

[ChrisPearson]

In what way is that williams replica? Looks awfull but for £100 you cant complain

 

[Vicky.]

Tbh you'll probably spend more money making it look nicer than you think but as someone said if you go at it the right way it has potential

Seriously though, new exhaust needed I could probably crawl in there lol.

 

[saltyhair81]

I have to ask, you said you put down a deposit on a £100 car. Can I ask how much? It's really bugging me.

 

[hot-hatch]

I have to ask, you said you put down a deposit on a £100 car. Can I ask how much? It's really bugging me.

£50 lol i was awaiting my pay from work and others were wanting to buy it

 

[Tom_90]

is it just me or are the body panels different shades of blue?

 

[Daz.]

no it'll be monaco blue with a sports (449) bonnet plus other panels!

 

[Wobba]

I've seen a ph3 with Willy body parts, lowered etc and full engine conversion, it was somewhere like Bulgaria, looked sweet. I'll try find pics.

 

[Savi]

I've also seen a phase 3 front fitted on a accident damaged williams a while ago

 

[Dave..]

That sets a new standard in sheds. I'd break it if you only bought it for £100. At least you might get a bit more money back than what you paid for it.

 

[sideways danny]

That sets a new standard in sheds. I'd break it if you only bought it for £100. At least you might get a bit more money back than what you paid for it.

bit harsh Dave. It's quite a nice car apart from not being put back together and a s**t exhaust

 

[Muttley1]

That little clio is the nuts. I have used it before and it was great fun! A lot of noise, but very responsive and pretty darn nippy!

 

[Dave..]

bit harsh Dave. It's quite a nice car apart from not being put back together and a s**t exhaust

Sorry Dan

 

[KMB]

I would agree with Dave, but we have to remember he's 17 and it will at least be a nice project to turn it from a shed to good clean car.

Have to say the 106 dechavved would have been my preference

 

[hot-hatch]

would the ph2 lights fit in ok ? or would i need a bumper too ?

 

[Savi]

You could get away with it, you will have gaps on the bottom. But there is trim you could buy which should still fit.

 

[hot-hatch]

You could get away with it, you will have gaps on the bottom. But there is trim you could buy which should still fit.

cool

would the clips on the ends or the ph3 lights be the same as the ph2 ? or will i need to splice ?

 

[Chesh]

LOL williams rep

get on clio16valver.co.uk. I cant believe no one has noticed hes written hes going to put gold williams stickers on it???
WHHHYYYYY?????? The only williams thing on that car is the bonnet, may as well call it a day & night rep cos its a clio lol.

Please just make it subtle, dannys photo he posted imo is the perfect height thats how high my valver is, its not too low, ive never had a problem with speedbumps or anything just slow down for them! Doesnt rub either, even with a full car.

edit: just looked again, think mines slightly lower than dannys

 

[White16valver]

cool

would the clips on the ends or the ph3 lights be the same as the ph2 ? or will i need to splice ?

You mean the plugs to connect the bulbs in? Yeah, should be