Search results for query: engine mount

I was torquing up the engine mount bolts on the driver side and the final bolt that I went to check seemed to be loose. All the other bolts were correctly torqued. On this one as soon as I put the to wrench on I could feel it was loose. I tried it with a normal ratchet and it was very easy to...

Hey All, Looking to replace all four mounts out of precaution (flexi’s gone) and I can tell the main lhs engine mount definitely needs doing. Where to actually buy good mounts not made of chineseum? Where to buy OEM parts online? Any recommendations appreciated. Who even made the original...

Hello - when stripping down my engine i noticed i failed to take note of a few bolt sizes to replace. I dont suppose anyone knows off the top of their head these bolts sizes? I assume they're M10x15mm but what length?

I bought an upgraded engine mount- the one that’s very obvious at the driver’s side of the engine. But my current manky one has horrible bolts- does anyone know the spec of them so I can order some sparkly new ones? The four in this picture:

My 172 Cup is in for some work next week but we are struggling to get the parts. I need all the engine mounts for a 172 Cup (o/s engine mount, dog bone and there are two attached to the gearbox I believe). I'm looking for OEM spec parts but beggers can't be choosers. Does anyone have all four...

Afternoon all. As I'm still currently failing to source a set of original engine mounts for my 182 Trophy ( the large upper mount has been on backorder with RPD since September last year - so I've given up hope of that ever materialising ), my thoughts have turned to using some aftermarket...

...that leads me away from suspecting the replacement parts causing it. When replacing the control arm, I noticed the rubber on the side engine mount was completely knackered. I have the part number, but I can't find any information or tutorials on replacing it. I'm a bit worried that since...

Looking to replace the rear engine mount/ dog leg bottom mount. 2 questions 1. How do you modify the original one to be more supporting and not get wobbly beyond silicone in the gaps. 2. The one for the automatic gearbox looks way more stable, will it fit manual cars?

Evening, I am looking some F4R engine subframe mounts, are these specific to a cup class car / cup series? Thanks!

Sorting the [new to me] 182 and thought I'd ask what the attached is. Heavy duty shiny black lump of a thing below the offside engine mount. Any clues?

Just fitted my new mounts from evol. I’ve Always had the powerflex dog bone mount inserts fitted, and I can say since adding these that I can’t notice any extra vibrations at all! Was a bit worried after reading a few threads and opinions on here… In my opinion a brilliant upgrade, the car...

I'm stuck between keeping the stock engine mount bushes (upper OSF and dogbone) and putting the poly bush inserts in. Fortunately, the mounts in the car are already in good condition... Just need more opinions and people's experience with having installed.

I want to refresh all my engine mounts, just for peace of mind, only looking to go for OEM rubber for less NVH than poly, car is purely for the road. I've already got a dogbone, but the other mounts are where I'm a bit stuck. For the driver's side mount at the top I'm looking at this febi one...

How many miles would you expect OEM mounts to last? Mine were last changed at 85k miles and the car is now on 128k miles. Didn't realise it had been 43k miles since and have got the impression recently that the gear change is a bit sloppier than it was. Is 40k miles+ a good innings?

Hi, has anyone got experience of power flex engine mounts when fitted to a Clio 200?? Recently became owner of a 12 plate 200 with very slight engine mount knock so wondered weather to upgrade but concerned about vibration through the cabin??? Cheers.

This black lump on the right side just seems like dead weight. Is it necessary?

...of work on my engine bay. Powdercoating brackets, general tidy up. Im looking to see if any one knows the bolt type for the driver side engine mounts. Which bolt onto the engine bay. The 4 large bolts. Whether theyre a special renault bolt or if theyre generic? Pic taken off the internet...

Hello, Im looking at buying some uprated engine mounts for my 182, When i research online Vibratechnics state they make road engine mounts and competition ones? Im after competition ones but cant find them anywhere? All im coming across are the fast road ones can anyone point me in the right...

...sump gasket yesterday... what a **** job! 😂 anyway, I had the engine lifted right up in order to do that with the 4 bolts attaching the engine mount to the chassis removed. when i lowered the engine back down, The rubber part of the engine mount stayed attached to the cambelt cover part of...

Hi all, In the next few days I'm going to give it a go and fit my PMS engine and gearbox mounts. Very surprised at how big they all are, proper bits of kit these! Have any of you fitted them before & do you have any tips? They certainly don't fit in the conventional way. Tia

Does anyone have PMS engine/gearbox mounts on a 182. They say it is a complete set: engine suspended mount, gearbox suspended mount and gearbox lower rear mount/dogbone. However there doesn't appear to be a replacement for this mount on the lower front of the gearbox, photo taken from nearside...

Can anyone tell me is there any difference between these engine mounts? I found the 1.6 l engine mount but I can't find for my Sport 172 but on first look I can't see any difference. Cheers

Hi, After a serious search I have found what is causing the strange noise when I steer to the left slightly. It is the right engine mount which I didn't expected. So I have a question, what is the OEM number for this part? Because I found it and I am not sure about it. Is it possible that it is...

As above please. I’ve done the inlet manifold and fuel rail cover and want to do the mount to match. I want to do it properly though and take it off. To do this do I just support the engine with a jack/some wood blocks then undo the bolts? Also what is the safest area to support the engine as I...

Folks, recently bought a LHS and RHS pair of vibra technics finest. But there seems to be a issue with the rhs one. The original mount (3rd photo) has a bolt with a square shoulder that locates into the engine top mount. The vibra technics just ha a regular bolt and if you take a look at the 2nd...

Hi, Can anyone tell me is Dogbone mount for clio sport 172 ph2 compatible with any other Renault model? I have problem finding it here right now... Cheers

...passenger side but I cant find any that fit. But it seems to be the center console too? Apparently the last owner fitted upgraded engine mounts to keep the engine tighter, anyone know if this improves the car or is it worth going back to originals. I believe this is why the car is vibrating...

Guys I'm trying to remove the powerflex insert from my upper engine mount. Any advice? What part actually comes off all of it? Does the engine need jacking up? I've removed all the screws but it will not come off! Been levering screw drivers into it and now it's too dark. Thanks

Not sure if anyone else has seen one of these yet, but i am so impressed by it, I felt the need to share. I recently fitted a new prototype Poly dogbone from PhillipM. This is really quite impressive, much improved gear selection and control of the engines torque reaction. However absolutely...

Been running a Powerflex upper engine mount insert for a while now and the dashboard rattles like mad! I can't seem to find an OEM replacement though. Anyone know where I can get hold of one? This yellow one is the softest Powerflex do :cautious: