Search results

Could somebody give me a few tips of how to remove an o/s headlight on a 53'reg 172 Cup. Where is it held on apart from the upper bolt. Reason I need to remove it is because it has just failed its MOT for the o/s headlamp not aligning correctly. I have found the auto electronic adjuster is...

He was on slicks, i was on road tyres. Enjoy. http://uk.youtube.com/watch?v=hrhWxfa9zU8

I'm selling my cup and wanted to remove the RS Tuning ECU from it and hopefully sell it. What I need to know is if my car will work with a standard ECU from another car. Will it require any kind of hacking before it works in another car or will it just work if I swap?

Are 172 and 172 cup back boxes the same? both 53'reg.

Cadwell Track Videos - 12th Sept Enjoy! http://uk.youtube.com/watch?v=xA-EoJ3t4ks http://uk.youtube.com/watch?v=jt2n2ie9O-s

Is the rear exhaust mount a renault part only or does somebody do pattern parts for it? Mines perished and cracked quite bad.

Subaru in the wall? Does he or doesn't he? If you were there, no giving away please. http://uk.youtube.com/watch?v=JQQEt96Re1Q

I have done several trackdays now and have a knocking type noise coming from the LF side of the car, which is getting worse and worse. I am assuming this is the top suspensions mount gone. I know GDI do some steel ones for £105 plus VAT, are they worth going for or shall I just change to the...

I bought some second hand OZ superleggra wheels for my cup from somebody who previously had them on a civic. the inserts that go on the back of the wheel where they fit onto the hub where to small so i took them out. the problem i have now is that the spacing is to big and it can be a bit of a...

Just fitted set of rear pads on my clio (which is job done) and want to know how they adjust themselves. I have fitted pads before to these types of calipers where you have to wind the piston in, but the clio ones where a bit weird. On the back of the pad there is a notch which slides in to...

I've got a weird burring noise coming from the LF when turning hard right at speed. I thought it was the wheel bearing, so i bought a wheel bearing and booked it in a garage, but they said the wheel bearing is fine and does not need changing. The tightened up the hub nut (although they said it...

Spotted a 172 cup today outside a karting place in Great Yarmouth. Anyone?

Clio 172 Cup - differences to the 172's - cat c track car I'm thinking of buying a cat c damaged 172 cup (not off ebay). What I want to know is what the differences are in the bodies/chassis/suspension arms from a standard 172. The car has light front end damage. Just need to know if the...

Has anyone on here had a go at changing the wheel bearing on a clio 172 cup? I'm changing LF. I ordered the bearing and got it today and intend to do the work on the weekend. Its the sealed type, not the tapered ones so I take it it's already greased up? (never done this type before) I...

Just spotted two 172 cups, one behind the other, on the back of the town centre (east street) in St. Ives

Saw a trophy on M6 going south near junction 2 or 3 today about 16:00hrs with the number plate T24PHY

I'm putting my car back to standard and selling. I just wanted to know how much a standard exhaust was? Is there cheaper pattern parts that can be replaced for it, or renault only? Currently it has a ktec stealth on it (only 1500 miles on this exhaust). The reason I changed it from...

I have had the carbone lorraine pads (with brembo max groove discs) in for a couple of months now. Done about 1500 miles on them including two track days. They still squeel extremely bad. I was told that once I had done a trackday they should quiten down, but the opposite has happened, they...

As title, what is the cost of replacing deployed airbags for a 172 cup, both passenger and drivers side. not that it has happened to mine, but I am thinking of buying a smashed up 172 cup and mending it.

whats the best springs to go for on the standard shocks. i want to lower the car by 40mm. i should be ok doing this, no rubbing?

saw you on east street (back of town centre), you must have been doing laps of the town centre!

Are all oil brands near enough using the same oil technology and product. I need some 5w/40 fully synth for my clio, but whose should i buy, mobil 1, silkolene, shell..........etc

Could somebody please give me some feedback for a set OZ SUPERLEGGRA wheels. I am going to buy some second hand ones that will be used only for trackdays. They are 15 x 7 with an offset of 37. Will these be ok to stick on my clio 172 cup? Also what sort of price should i be paying for 4...

anyone know?

Probably a very stupid question. I know exhaust wrap is used for thermal purposes, but if I wrapped this around my straight through decat would it make it any quieter.

what the best wheel cleaner which you can spray on, not scrub much and then rinse off. must work well.

ordered ktec group 'n' remapped ecu today (exchange unit) - but not sure if i done the right thing! would it be better to have my car 'inividually' remapped!? mods itg maxogen kit straight through decat ktec exhaust angelworks manifold this is so confusing!

I want to buy one of these: http://www.performancebox.co.uk/ Read this to see what it does: http://www.performancebox.co.uk/Download/RLPB_Manual-English.pdf They are the same technology as the Drift Box which is used by the Magazine people. They are willing to give me a 25% through my...

Not sure if I am allowed to do this but here is my ebay shop: http://stores.ebay.co.uk/Deviltronics_W0QQsspagenameZMEQ3aFQ3aSTQQtZkm Sell everything from ipods, sat navs, tvs etc (basically consumer electronics) Stock is updated weekly. The stock is 16 day customer returns from a major uk...

Anyone know of a garage who can do remaps and have a rolling road close to the cambridge area. I want to get this done and did decide to go to ktec to do it, but they are 164 miles away from me which is a 3 hour drive (according to the AA route finder), need someone closer to home!