Search results

Spotted at Monks Cross Asda car park with what looked like cliosport.net stickers.

Hey guys, Anyone know where i can get a new connector for the wiring that goes into the rear light cluster? Or even a new set of the terminal pins that I can re-crimp. Cheers. This connector here,

Alright guys, Anyone know if this noise is normal or is the shaft goosed? Or is it something gearbox related? I have two new driveshafts to stick on but i don't want to spend 4-5 hours or whatever putting them on if it could be a gearbox issue. cheers for any suggestions.

Hey guys, Any Diesel gurus give me the low down on symptoms and causes of a failing diesel fuel pump? Also are there 2 pumps on the k9k? I know there is the high pressure sprocket driven one, is there also one in the tank? Not really up on my oil burners so any help would be appreciated :)...

So one of the wheel bearings on the rear of my Clio isn't the best so I was going to change it before the MOT next week, so I bought some 2nd hand drum with a decent bearing to fit. Problem is some of the teeth on the ABS ring are chipped is this going to cause an issue with abs throwing up...

Hey, What's the correct way to set these? It says to do them up anti-clockwise to the start of the timing window then turn the engine over 6 times then turn it clockwise to the middle of the timing window. But I've read here that people just do them anti-clockwise into the middle of the...

Hey probably a long shot but this has been doing my noggin in for ages now. Got this noise sort of like rubbing on the passenger side, best way to describe it is like rubbing sandpaper. When I'm driving along it's fine, it only tends to only happen when either a) you set off after the car has...

Hey guys, does anyone know if the mk3 clio hubs the same as the mk2? Looking at a hub from a mk3 clio 1.2 09 plate, will this fit my mk2 clio 1.2 03 plate? thanks again

Hey, I decided to overhaul my suspension and brakes so i bought all new suspension parts and also braking i bought new calipers, slider pins, discs and pads. Now i've finished everything on the O/S and bled the brakes had a little shot on my drive way stops fine, then took it up the road and...

Quick question on the n/s driveshaft. I changed both a while back and drained the gearbox oil and refilled it. Anyway I'm planning on doing a full front suspension and brake upgrade and was wanting to take the hub off for painting and sand down and de-rust paint the drive shaft. If I pull out...

Hey, Been searching the thread and couldn't find a definitive answer. Anyone know if the Powerflex dogbone bushing kit PFF60-211K would fit this dogbone mount...

Hey, I've got this issue with my Clio where some times if the car has been left for a day or two the first few minutes of driving the car will hesitate and lose speed with no acceleration. Basically you will feel the car losing power and when you press the accelerator nothing will happen, until...

Hey there, Wonder if anyone knows if the tensioner pointer is supposed to move within the timing window when the car is running. Let me explain, I changed the belt on my car and I tensioned the pointer to the front of the timing window by turning it anti-clockwise tightented tensioner nut to...

Hey guys, wonder if any of you can shed some light on a weird noise i'm experiencing after changing cambelt, waterpump, tensioner and aux belt on my 1.2 16v clio. Here is a video of the noise, http://www.youtube.com/watch?v=a_0e_fqKGtk it only seems to be on idle when you are going it sounds...

Hey, I had an MOT on my Clio the other day and it passed but with a weird advisory on the offside front wheel unable to rotate while in the air (on the lift). Now I had it at home the previous week on stands checking the car and found no problem with it, and when I got home after the MOT did...

Hey guys, Was wondering if anyone could recommend somewhere in the Yorkshire area to have a timing belt kit/waterpump/coolant and aux belt changed? Normally i'd just do it myself but I really don't have the time at the moment and it's in need of doing. thanks in advance mavez

Hey guys, I was wondering what are the dimensions of these bolts? i've changed the O/S driveshaft today and would rather replace the bolts with new ones. Will any bolts of the correct size do e.g. (halfords, B&Q). I'd rather go out today and get them than wait a few days for them to be sent...

Hey, anyone know how much a brand new engine wiring loom is for a Clio 1.2 16v D4F 53 plate. cheers

Hey there, Car started randomly missing and lacks power (more than usual ;D). I've had the engine management light on the dash come up and hooked up the scan gauge to it which read out a P0203 code which is injector on the 3rd cylinder. I've put a different set of injectors in, changed sparks...

Hey there, Anyone know of a place you can buy these new? As yesterday I was working on my car doing an oil and filter change, when I thought i'd put some copper grease on the back of my pads to dampen some squealing. Anyway i've managed to snap the bolt holding the caliper to the caliper...

Hey there, was going to change oil/filter last weekend as I bought some 10w40 and an oil filter. I drained the old oil and was getting ready to put the new filter in when I realised that the filter was a lot bigger than the plastic canister that was suppose to house it. Am I right in...

Hey, Thinking putting new brake discs and pads on my 1.2 16v clio. Was just wondering what is the best set of pads and discs to get for this little machine. Also fitting them, do they discs just slide on to the hub or is there some wheel bearing that has to be pressed into them? thanks mavez

hey there am looking for some peoples opinions on getting a CF bonnet. Due to some punk thinking it was a good idea to give my bonnet a good ole kick on a friday night it's pretty much dented. I've tried popping it back into shape but it's still pretty bad. So am wondering if I should just...

Hey guys, I was wonder if anyone knew if all OZ Racing wheels have the same bore diameter. Because I need to get some spigot rings as they don't fit flush on to my Clio 2 1.2 16v. Thanks in Advance Neil M

Alright Guys, Some NED/Chav Minker has tried to force my passenger door open and has bent it. You can see all around the top there is a gap! How much does it cost to repair or even replace this door Thanks Mavez

Hey sup guys, Anyone know a decent place to get genuine renault parts e.g. LH side front Wing. I dont wanna go buying one that looks feckin different ;) Thanks

Sup got my new wheels and in the packaging as well as the new wheel nuts i have these 4 metal ring things anyone know what they are for? thanks

the left hand wing of my car (Clio 2 (1.2)) has a big crack up if, how much are we talking about for replacing this? anyone know? Thanks

It's probably been asked before but here goes.. some punk a while back snapped my clio badge off, so i bought a couple more. If you remove the plastic panel on the boot lid is there the slots for the badge? seeing as i'll have to pop out the broken plastic pieces of my old badge to fit the new...

Hey there, quick question. On the standard clio alloys there is a central hub with a weird type of lock on it. I assume there is a special type of key to undo this. And since i can't find mine i was wondering where i could aquire one or any other methods to remove this Thanks Mavez