AG200 Rescue

[Phil555]

Busy morning today. PMS stud conversion done. Extended studs fitted for the 20mm spacer fitment.

Hubs and studs cleaned with Loctite cleaner.

Loctite 2700 applied to studs.

Studs fitted and torqued to 20Nm. Then left to set for 4 hrs.

Studs in place.

 

[Phil555]

Wheels fitted and studs in situe.

 

[Phil555]

Gave the car a quick run out to make sure the studs and nuts were OK.

 

[Phil555]

Started to heap wrap the Toyo Sports manifold but ran out of heat wrap...................... DOH.

 

[Phil555]

Few new parts arrived.
YSR Coilover kit.

Sabelt steering wheel from Volantech.

 

[Phil555]

Made the most of the lockdown and fitted the steering wheel today.

 

[Phil555]

Steering wheel off to fit some 3.3ohm resistors for the airbag light.

£4 off ebay and work a treat.

 

[Phil555]

Gave the battery covers a lick of paint. Turned out quite well.

​

 

[Detail Chris]

Made the most of the lockdown and fitted the steering wheel today.

View attachment 1461830
View attachment 1461831

How muchy for the wheel and carbon but panel? Not seen these all back wheels before. Looks amazing buddy

I presume the buttons give you CC?

 

[Phil555]

How muchy for the wheel and carbon but panel? Not seen these all back wheels before. Looks amazing buddy

I presume the buttons give you CC?

How do. Cheers.

The full kit was from Volantech and was £375.

 

[Phil555]

Yeah the green are for the horn and the black for the CC.

 

[Inequality Street]

I love this thread. But it also annoys me how much progress you have made considering I've had mine longer LOL

 

[Phil555]

I love this thread. But it also annoys me how much progress you have made considering I've had mine longer LOL

LOL, cheers.

Wish this damn virus would fook off as I have loads of parts to get fitted.

 

[JackJack]

Great work on this

 

[Phil555]

Great work on this

Cheers pal.

 

[Phil555]

Hi everyone, hope you are all staying safe.

Little update on some parts etc.

TRS wheel cover arrived last week. Keeps the suede looking fresh.

 

[Phil555]

Few new parts arrived this week.

Full carbon trim from Carbon Skins.

Fitted one part so far to get a feel.

 

[Phil555]

Few more service and suspension parts also arrived.

Few sets of brake lines ordered (3 by mistake............ DOH!!). Sold now though.

​

 

[deanoE30M3]

Looks great with the work you’re doing..

This car could of owned to the traders who bought the chi’s car collection.

Used to see this car years ago and is originally from Edinburgh, It was around alot and it was an older gent it had it.

A720 Edinburgh Bypass - Edinburgh , Scotland September 2012
View attachment 1455780

CoPart Auction - West Lothian , Scotland November 2019

View attachment 1455781

Seen on youtube on a channel - Jan 2020

View attachment 1455782

there could be a video of this car Guide on when buying a 197 - 200. I’ve not watched to find out though!

 

[Phil555]

Looks great with the work you’re doing..

This car could of owned to the traders who bought the chi’s car collection.



there could be a video of this car Guide on when buying a 197 - 200. I’ve not watched to find out though!

I bought the car from the guy who does those vids.

 

[deanoE30M3]

I bought the car from the guy who does those vids.

Ah ok, thought you’d bought it from copart

 

[deanoE30M3]

I bought the car from the guy who does those vids.

Ah ok, thought you’d bought it from copart

 

[Phil555]

Ah ok, thought you’d bought it from copart

I bought it when it was repaired.

 

[Phil555]

Carbon interior parts fitted from Carbon Skins.

Speaker surrounds are being done this week.

 

[Inequality Street]

Little heavy on the carbon for my taste, I think I'd put the silver door pulls (bit you pull to open the door) on to break up the doors (with the carbon back/surround) if that makes sense.

I love the gear knob and gaiter though, is that a chop it off job?

 

[Phil555]

I love the gear knob and gaiter though, is that a chop it off job?

Bought this from a guy on FB. Custom made alcantara.

 

[Stefan.]

Bit over the top for me, as above needs breaking up a little.

 

[Phil555]

Few new parts now fitted.

KTR Induction Kit.

YSR Coilover Kit & HEL Brake Lines.

SuperPro Droplinks.
​

​

​

Universal Racing ARB.
​

Full Scorpion Exhaust inc De-cat along with Toyo Manifold.

​

 

[Phil555]

Cup Racer wheels now on.

​

 

[Phil555]

Tegiwa coilover socks fitted.

Coilovers soaked with ACF-50 anti-rust protector.

​

​

 

[Phil555]

Bit more carbon added to the interior.

​

 

[Phil555]

Another 10 BHP added with these carbon effect door catch covers.

 

[Clio_fool]

Cool pics 👍.
@Nik why is all the text grey and virtually invisible in dark mode? 😎 Surely that shouldn't be possible?

 

[Gally]

Nice additions. Does it sound half decent now with the manifold etc? They were so muted and dry as standard.

 

[Nik]

Cool pics 👍.
@Nik why is all the text grey and virtually invisible in dark mode? 😎 Surely that shouldn't be possible?

It’s all white for me? Pics?

 

[Matt e]

i think it happens because the OP has copied it from a forum with a white background and pasted it on here

 

[Optimista]

I love your work... What's that on the passenger floor, cirlce thingy

 

[Clio_fool]

It’s all white for me? Pics?

If it's a copy and paste issue then just give him a slap for not posting here first 🤣.

 

[Phil555]

Nice additions. Does it sound half decent now with the manifold etc? They were so muted and dry as standard.

100% better but loud with the non res.

 

[Phil555]

I love your work... What's that on the passenger floor, cirlce thingy

Dicklok