Paul.M
ClioSport Club Member
It looks like great delivery of power on that graph, seems like a fantastic car, great build!
ClioSport.net
Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
AndyRg - 20VT French/German Sleeper ish
- Thread starter Andyrg@ ClioTurbo
- Start date
- Status
Poopensharten
ClioSport Club Member
Golf R
Great build thread, just read the whole thing!
Excuse my ignorance, but isn't 70bhp as a transmission loss quite alot?
Excuse my ignorance, but isn't 70bhp as a transmission loss quite alot?
Depends on how its measured, on some rollers it includes the transmission loss of the rollers as well.
Either way, I bet it goes very well!
Proper graph that, nice one mate
Really good torque spread.
Any plans for a few more RPM though just to give you that extra bit of headroom out of the bends, even if the power is dieing off its still useful not to have to change gear I find.
Trophy Turbo :)
Rev limiter is set to 7200 but we developed a misfire top end due to a coil pack issue, so we aborted mapping and stuck a 6500 rpm limiter untill i can get it sorted, i have sent the ecu back for repair and had had it adjusted to run the OEM renault Coil pack at the 20vt ones are expensive and crap.
The Power is still climing but the torque droping off not by much tho even at 6500
The car is back in bits again, utterly upset and wounded, that my oil pump failed brand new item and it took the whole thing with it.
Awaiting my new SCAT rods, Crank, and Wisco Pistons, Uprated Pump, ARP head Kit and my worked head.
The Power is still climing but the torque droping off not by much tho even at 6500
The car is back in bits again, utterly upset and wounded, that my oil pump failed brand new item and it took the whole thing with it.
Awaiting my new SCAT rods, Crank, and Wisco Pistons, Uprated Pump, ARP head Kit and my worked head.
Rev limiter is set to 7200 but we developed a misfire top end due to a coil pack issue, so we aborted mapping and stuck a 6500 rpm limiter untill i can get it sorted, i have sent the ecu back for repair and had had it adjusted to run the OEM renault Coil pack at the 20vt ones are expensive and crap.
The Power is still climing but the torque droping off not by much tho even at 6500
The car is back in bits again, utterly upset and wounded, that my oil pump failed brand new item and it took the whole thing with it.
Awaiting my new SCAT rods, Crank, and Wisco Pistons, Uprated Pump, ARP head Kit and my worked head.
Is it not worth chasing the pump manufacturer to see if a warranty claim/goodwill is possible mate?
You not breaking it now then andy?
Absolutely no chance IME
Mate of mine built a cosworth engine, 10K or so worth, the pump failed, he sent it back to cosworth and they admitted the pump was at fault, even then they only paid out for the value of the pump, not a penny towards the parts or the labour on the rest of the engine.
Most companies have a "maximum warranty claim is strictly the invoice total" clause for stuff like that, ie they will never pay out more than just the value of the item.
Trophy Turbo :)
As chip said, I got a refund on pump, but that was only cos I went mental with the lads,...
No I've not been to Manchester, was I Bolton a few weeks back.
No I've not been to Manchester, was I Bolton a few weeks back.
Trophy Turbo :)
172 cup, Impreza P1
going to sort it out mate, its to much fun, ordered a bosh 044 and a swirl pot today
Good man!!!! :approve:
Trophy Turbo :)
Here is how hot things got £600 worth of rods just in the bin
£600 worth of rods just in the bin
Trophy Turbo :)
Trophy Turbo :)
Well the motor is back in up and running with a few imprivements. Big port head with inlet. New boost pipes. Water meths spray. And some general tidy ups.
Need to get inlet polished but I need to run the car in first I can do that in stages.
Need to get inlet polished but I need to run the car in first I can do that in stages.
Did you manage to do me the measurements for the mounts mate?
KTM 990 SD / S60 D5
Nice, water meth works really well on turbo motors, what sort of kit are you using.
Trophy Turbo :)
Dan ive got then all done via photos will send you when I get two spare minutes!!
Aem kit from efiparts. Co.uk
Aem kit from efiparts. Co.uk
Lovely! Cheers!
going to sort it out mate, its to much fun, ordered a bosh 044 and a swirl pot today
Good to hear it :approve: More boosted clios in the NE the better lol, I bet its an animal with those power figures.
Trophy Turbo :)
We can swap keys lol
Trophy Turbo :)
Hello Rob.
It has indeed i am Down in Birmingham a week come sunday in the Truck, Collecting a car for a friend on here.
I could pop in for a Coffee and see how The Motor we did is getting on.
It has indeed i am Down in Birmingham a week come sunday in the Truck, Collecting a car for a friend on here.
I could pop in for a Coffee and see how The Motor we did is getting on.
Good to see you've got this back up and running andy
Trophy Turbo :)
first ride out tonight!!!!
225 powered mk2
Hello Rob.
It has indeed i am Down in Birmingham a week come sunday in the Truck, Collecting a car for a friend on here.
I could pop in for a Coffee and see how The Motor we did is getting on.
Awesome, sounds like a plan to me mate! will be good to see you! pm which part of brum you're going to be in
Trophy Turbo :)
Pleased to say that after many weeks and months of hard work we have a car again
Have covered 60 miles today and had a trouble free motoring today leak free and ready for a run in and then mapping.
Love the car when it shines like that
Have covered 60 miles today and had a trouble free motoring today leak free and ready for a run in and then mapping.
Love the car when it shines like that
KTM 990 SD / S60 D5
What colour is that, looks great.
Trophy Turbo :)
Russ I forgot a about that ill be in touch oppps
Tim.
ClioSport Club Member
Couldn't agree more, it looks fantastic and suits the car so well!!!
Trophy Turbo :)
Yeah Jon i cant handle any more sheds LOL
few updates of the finished
few updates of the finished
- Status
