Davys 172 Flamer!

[Paul Mitch 1986]

There easy to do mate just take your time. I had no experience what so ever an i fitted mine. Mine came with 182 runners so was pretty straight forward, hardest bit was getting them in the car without catching the outside. Mines not my daily so wasnt really any pressure if things went tits up. Other that that easy enough mate good luck.

 

[Paul Mitch 1986]

Old ones

 

[Stay Puft]

Old ones

Cheers mate, yours look great.

Yeah, should just be undo the 4 bolts, old out, new in, then ill worry about the wiring later!

 

[Paul Mitch 1986]

Old ones

 

[Chris_Beer]

I guarantee something will go wrong lol

Nice one for getting them though, look great

 

[Paul Mitch 1986]

Cheers mate, yours look great.

Yeah, should just be undo the 4 bolts, old out, new in, then ill worry about the wiring later!

Cheers mate, yours look great.

Yeah, should just be undo the 4 bolts, old out, new in, then ill worry about the wiring later!

I paid 650 for mine. Silly money if you ask me but they are a huge improvement. Put me back a good few month for my turbo conversion but they are the dogs b****cks.

 

[ADS_V6]

I guarantee something will go wrong lol

Nice one for getting them though, look great

I'm putting a fiver on davvy getting his head stuck in the floor pan

 

[Chris_Beer]

Threaded bars on bottom of the frames damage the paint
Threaded bars on bottom of the frames have damaged threads and nuts dont spin on properly
Threaded bars inaccessable
Old nuts don't undo or have been welded on
Wiring Melts
Seat Airbags go off
Seats eject @Davyy through the roof and land on the injectors
Seats blow away in the wind into a river

 

[Stay Puft]

I'm putting a fiver on davvy getting his head stuck in the floor pan

Haha free wax if i dont??

The seats in my car were only fitted a year or so ago, so im hoping they come out easily enough! May have wiring issues.. the old owner of my car completely hacked that!

 

[imprezaworks]

Threaded bars on bottom of the frames damage the paint
Threaded bars on bottom of the frames have damaged threads and nuts dont spin on properly
Threaded bars inaccessable
Old nuts don't undo or have been welded on
Wiring Melts
Seat Airbags go off
Seats eject @Davyy through the roof and land on the injectors
Seats blow away in the wind into a river

Funniest thing I've read for a while, flol

Brilliant. Especially the injector part. Oh and the river part.

Top draw

 

[ADS_V6]

@Davyy Last seen on Sunday fitting seats and adjusting injectors.

 

[imprezaworks]

Flol.

 

[Daz...]

Haha free wax if i dont??

The seats in my car were only fitted a year or so ago, so im hoping they come out easily enough! May have wiring issues.. the old owner of my car completely hacked that!

Get it plugged into Clip and have them turned off properly.

 

[Paul Mitch 1986]

Get it plugged into Clip and have them turned off properly.

That's what I had to do we mine bud

 

[cs_dave]

Ejecto seato cuz

 

[Chris_Beer]

The seats in my car were only fitted a year or so ago, so im hoping they come out easily enough! May have wiring issues.. the old owner of my car completely hacked that!

Sorry pal - You'll be fine, just CS "bants" lol - The wiring can be sorted, or as above, hidden away and turned off electronically

Funniest thing I've read for a while, flol

Brilliant. Especially the injector part. Oh and the river part.

Top draw

Just laughed at my own post 😂

@Davyy Last seen on Sunday fitting seats and adjusting injectors.
View attachment 177144

LOL

 

[leeds2592]

With regards to cleaning them, I've just got some Raceglaze Alcantara cleaner and a soft brush from Polished Bliss as mine as a bit shiny and mucky in places.

Not used it yet so can't comment on how good it is but I'm using it at the weekend so will let you know if it's any good.

 

[Stay Puft]

Here goes nothing.. (should be trying to finish my dissertation)

 

[imprezaworks]

You brushed your teeth?

 

[leeds2592]

Don't wet them too much or else they'll end up staining and getting water marks on them!

 

[ADS_V6]

Never thought of using lemonade on the seats.Would ginger beer be ok?

 

[Stay Puft]

Barely used anything mate. Quick scrub over and then very light use of the hairdryer.. pretty much dry now and got out a couple of tiny tiny marks. There was a bit of shine on the drivers base and the drivers bit where the seatbelt comes over.

Shiny bit on the seat base..

Drivers bit..

Made quite a difference, and pretty much dry..

 

[imprezaworks]

Looking good mate

 

[Chris_Beer]

They look similar to how mine were pal

Check my thread, Raceglaze seems to do the trick and it's safe to use on Alcantara material. Have to be careful with it, the same as the 1*2 seats etc that you don't ruin it or end up bobbling it to high heaven.

They will however look spot on when they are in the car themselves and you don't see it when you sit on them anyway lol

 

[Stay Puft]

Mmmm, so nice.

Before, prev. owner had it sprayed, and the paint has crazed over time, due to bad prep apparently.

Asked the painter to take some pics for me if he could..

 

[BGEarles]

Spending some coin you are £££!


Sent from my iPhone using Tapatalk

 

[ADS_V6]

Freshly painted spoiler will transform the car there mate.
Then throttle bodies in the spring?
Diy kit maybe

 

[Louis]

Looks like burgundy in that picture! I hope the colour match is okay to the rest of your car. I know with inferno it can be the identical colour, but the spoiler due to its shape looks different.

 

[Stay Puft]

Looks like burgundy in that picture! I hope the colour match is okay to the rest of your car. I know with inferno it can be the identical colour, but the spoiler due to its shape looks different.

Yeah it looks a bit dark. Will be hard to tell until ive given the car a clean.

 

[imprezaworks]

Looks brill

 

[cs_dave]

Spot on that looks stunning

 

[Stay Puft]

Brand new upper brake light as I managed to crack the old one upon removal. Now to try and fit it without breaking it.

 

[leeds2592]

I think it's physically impossible to remove the brake light without cracking it, or in my case it definitely was!

 

[Stay Puft]

Spending some coin you are £££!


Sent from my iPhone using Tapatalk

Thankfully my mrs paid for the spoiler to be painted as an xmas pressie, and my mum and mrs put money towards the recaros for my birthday!

 

[Louis]

Maybe best to fit it from inside the car mate so it's no chance of scraping the roof. Upto you though!

 

[Stay Puft]

Maybe best to fit it from inside the car mate so it's no chance of scraping the roof. Upto you though!

Couldnt work out what you meant mate as you cant access the holes with the boot shut. Managed to do it without it rubbing etc, so no damage. But the colour is a bit off. Im not sure if its because my car needs a good wax and its very very dirty (3months since last wash), but the spoiler is a bit too red/dark.

 

[Louis]

Ahh, thought youd be able to access the two middle ones. Looks good in the pictures, but only you know in person. If it's not right, take it back and get it done again.

 

[leeds2592]

Does look a bit too dark in the pics, but it all depends what it's like in person.

I had a cup spoiler painted Inferno and it is a bit more orange than the rest of the car but you can't tell unless you properly look at it under artificial light.

 

[imprezaworks]

In that pic it's darker.

 

[BGEarles]

Thankfully my mrs paid for the spoiler to be painted as an xmas pressie, and my mum and mrs put money towards the recaros for my birthday!

Lucky man [emoji16]


Sent from my iPhone using Tapatalk