Interior strip out, footwell ideas?

[MarkX]

Now I have my cage I've decided to go a bit more hardcore with the interior, ditch the carpets and any other bits I can live without and paint the bare interior. I'd like to see what you've done with your footwells, sitting in the car the strengthening rib that runs towards the brake pedal feels a bit awkward......do you just live with it and use grip tape or have you needed to install a false floor/footrest?

 

[scooby-93]

I've currently got a car mat in there atm but like you I'm looking for an alternative

 

[imprezaworks]

i just live with it tbh. I had looked into like a plate of some sort to make it look a bit neater.

 

[ed55j]

Alloy footrest?

 

[imprezaworks]

Have you got one?

 

[NorthloopCup]

I've just got strategically placed grip tape in mine. I also kept the strengthening rib in there as its there to help prevent your ankles snapping in the event of a heavy frontal impact.

 

[MarkX]

I've just got strategically placed grip tape in mine. I also kept the strengthening rib in there as its there to help prevent your ankles snapping in the event of a heavy frontal impact.

I've seen a pic on here of a car with it removed, not something I'm tempted to do tbh, but I think it'll bother me!

 

[m&l172ph1]

Make up an alloy false floor and then grip tape that?

 

[Dave LM]

I painted my drivers side floor with some truck bed liner paint I got from Halfords. I have previously used the gripper tape, but it started lifting when it got a bit wet.

The painted floor has the same feel of the gripper tape underfoot.

 

[Greeny.]

Grip tape, far to much in fact as ive ripped it in various places :/

 

[sonny172cup]

Carbon floor with a few spacers and M6 dome head bolts, I have gripper tape on the part under the brake and acc pedal, clutch area free.

 

[MarkX]

Carbon floor with a few spacers and M6 dome head bolts, I have gripper tape on the part under the brake and acc pedal, clutch area free.

that looks superb. I've just bought a couple of Omp Ali ones, need to find spacers and bolts for it, pics when it's done

 

[imprezaworks]

Have you got a pic of the omp ones Mark?

 

[MarkX]

Have you got a pic of the omp ones Mark?

nothing fancy, just chequer plate with nice rounded corners, should tidy the footwell areas

 

[Jekyll]

Skateboard tape. Nice and grippy and non slip, plus you can cut it to the shape you want and just stick it down. Cheap, easy and practical.

 

[imprezaworks]

Skateboard tape? Mark have you a link to the omp ones

 

[Jekyll]

Yep. Lots of grip and you just cut to suite.

https://www.atbshop.co.uk/longboard...rd-grip-tape?gclid=CP-p28DPycYCFdTLtAodJV4N4g

 

[imprezaworks]

Ah ok. You got a pic

 

[Jekyll]

Ah ok. You got a pic

Here's a few pics from members cars. Depends how fussy you you can have them rather neat. Plenty of threads on the stuff too :smile:

 

[MarkX]

Ah ok. You got a pic

I got mine from YB racing but they've none left.
JJC have them too http://pages.ebay.com/link/?nav=item.view&alt=web&id=361071966663&globalID=EBAY-GB

 

[sonny172cup]

Lol those top 2 pics are mine haha thats how the racer looked in 2012!

 

[Jekyll]

I found it from your project thread mate! Hope you dont mind.

 

[sonny172cup]

No i dont mind...

 

[imprezaworks]

I'd probably opt for the alloy style

 

[clioben182]

http://m.ebay.co.uk/itm/141347214868?_mwBanner=1

This looks good although a little expensive imo

 

[imprezaworks]

Yeah looks good.

 

[Greeny.]

I just bought generic grip tape from eBay, its ok and cheap, does the job but it's starting to rip it with little use due to the lack of a proper flat surface to stick it to I would imagine.

 

[massiveCoRbyn]

My Escort F2 car has a piece of alloy sheet that is bent to form a little step up an then forms a perfectly level floor, with grip tape applied to it.

It's worth noting that once you take the carpets etc out, the floor might actually end up feeling a bit low. I noticed that in my rally car when I first got it, so am fitting a foot rest to lift the floor a bit. Depends how thick the carpets and sound deadening are though!

 

[MarkX]

I'd probably opt for the alloy style

still in the packaging but on the floor to give you an idea of size/shape

 

[sonny172cup]

Iv never been a fan of that metal plating, more for looks than anything else

 

[massiveCoRbyn]

Carbon fibre all the way lol

 

[MarkX]

Iv never been a fan of that metal plating, more for looks than anything else

Carbon fibre all the way lol

Mine aren't for looks, I need to cover that horrible rib in the floor. Carbon is much nicer but too expensive for what I want, Ali will have to do

 

[sonny172cup]

£10 for a A3 5mm thick CF sheet off ebay, few domehead bolts job done

 

[MarkX]

£10 for a A3 5mm thick CF sheet off ebay, few domehead bolts job done

seriously? I just assumed expensive!

 

[massiveCoRbyn]

It can be a lot cheaper than you think now, especially for relatively small bits and pieces. I want some door cards for my Escort but they can get a bit pricey it seems.

 

[imprezaworks]

£10 for a A3 5mm thick CF sheet off ebay, few domehead bolts job done

Wouldn't have a link would you?

 

[imprezaworks]

I assume something like this

http://pages.ebay.com/link/?nav=item.view&alt=web&id=121586859637&globalID=EBAY-GB

 

[sonny172cup]

http://www.ebay.co.uk/itm/251248189504


Sorry just checked it cost more than a tenner :/ was a while ago now

 

[imprezaworks]

Saw that. To keep costs down I will probably end up with the carbon affect, similar to what I linked

 

[NorthloopCup]

Mine with strategic grip tape - it's been fitted a good while now and it's also seen plenty of use. No ripping!

Excuse the s**t pictures! It's dark in the garage and difficult to picture!

Use a hairdryer to form it around the creases is my advice.