Jacob's titanium ph1

[Mr R.]

Not here it's not

It is in Essex. (for once) :rasp:

 

[Flat Eric]

Looking good Jacob. I think the wheels look good on it too.

Would make sense to get an LSD whilst box is out too

 

[The Russian.]

This proves the sun 'isn't' shining here yet and a really poor pic of a dirty car.

I'm unsure so I'm going to out my titanium mirrors back on I think and waiting on my bullets from spray shack.

 

[Ph1 Tom]

Titanium mirrors imo

 

[The Russian.]

Titanium mirrors imo

That photo makes them look black whereas they are a nice anthracite colour.

As I'm trying to refresh it I think your right.

 

[The Russian.]

I'm looking forward to Thursday MicKPM, looking forward to you doing the 197 cams and matched inlets.

 

[Coops Mk1]

i'll have to pop over for a nosey at the weekend mate once the cams are in, is it getting mapped too?

 

[Cub.]

Gripper LSD will make a huge difference bud. Great call!

 

[The Russian.]

i'll have to pop over for a nosey at the weekend mate once the cams are in, is it getting mapped too?

Yeah will be getting mapped but ringing Paul later to cancel for this Saturday, unsure the gearbox as it is how will hold up for mapping.

Gripper LSD will make a huge difference bud. Great call!

It's all your fault x

 

[Cub.]

Best mod I did to mine, hands down.

 

[The Russian.]

Door handles fitted and gave a good wash.

The door handles seem a little darker, could be the fact I need to machine polish my car to get some gloss back, if not il have them sprayed again.
CUB pm the full price of what yours cost mate, If you don't mind.

 

[Gray]

Door handles fitted and gave a good wash.

The door handles seem a little darker, could be the fact I need to machine polish my car to get some gloss back, if not il have them sprayed again.
CUB pm the full price of what yours cost mate, If you don't mind.

Might be because they are a different grade of plastic, so it's not a perfect match? - looks alot cleaner on side profile now. Do like.

Did you manage to fit the handles ok?

 

[The Russian.]

Might be because they are a different grade of plastic, so it's not a perfect match? - looks alot cleaner on side profile now. Do like.

Did you manage to fit the handles ok?

Yeah fitted then pretty easily and quickly, just the screw Clip on the interior door handle dropped down do now struggle opening from the inside

Yeah you could be right tbh, does look a little fresher.

Tested Dave's epas out tonight and it's proper brilliant setup.

 

[Rob]

Jacob, I can't wait to see this again, can we swap and go out for a blast?

Cub. I need to drive yours with the diff, I need to see just how different it is...

 

[Gray]

Yeah fitted then pretty easily and quickly, just the screw Clip on the interior door handle dropped down do now struggle opening from the inside

Yeah you could be right tbh, does look a little fresher.

Tested Dave's epas out tonight and it's proper brilliant setup.

Those clips have a habit of doing that!

Ahh sweet did he pop in and see you? Yeah the EPAS is a great setup! I really like it.

I'll pop round one night this week for a brew dude, me and Laura are almost over this flu bug!!

 

[The Russian.]

Yeah he popped round, can't believe how brilliant it felt, even on the stiffer setting.


Get yourselves round

 

[The Russian.]

Jacob, I can't wait to see this again, can we swap and go out for a blast?

Cub. I need to drive yours with the diff, I need to see just how different it is...

Sure Rob, hopefully it will be perfectly setup with the diff and cams in

 

[Cub.]

Jacob, I can't wait to see this again, can we swap and go out for a blast?

@Cub. I need to drive yours with the diff, I need to see just how different it is...

Of course you can mate. It makes a more noticeable difference on track against non-diffed cars but you'll see the difference pushing hard on the road aswell.

 

[The Russian.]

My ph1's back and all cammed up

Big thanks to MicKPM for the quick install of parts and work carried out. X

So it's just had the following;

197 cams.
Matched inlets with bigger throttle body.
Pms A/C delete kit.
Cambelt, water pump & dephaser.

I can honestly say it's like driving a completely different car, Datt cam sound !!! Is incredible which has changed the exhaust Note with a few pops here and there, it revs more freely and is loads more responsive.

Performance wise the Car still needs mapping which is this Saturday with Paul. Let's see what figures he can conjure up.

Another thanks to NorthloopCup for sorting me a gripper diff out, great price Mark, thank you.

Can't wait to get that bad boy fitted

Looking at some recaros but not to fussed about them at the minute ( I don't think ) ha

Cheers guys.

 

[Mr R.]

My ph1's back and all cammed up

Big thanks to @MicKPM for the quick install of parts and work carried out. X

So it's just had the following;

197 cams.
Matched inlets with bigger throttle body.
Pms A/C delete kit.
Cambelt, water pump & dephaser.

I can honestly say it's like driving a completely different car, Datt cam sound !!! Is incredible which has changed the exhaust Note with a few pops here and there, it revs more freely and is loads more responsive.

Performance wise the Car still needs mapping which is this Saturday with Paul. Let's see what figures he can conjure up.

Another thanks to @NorthloopCup for sorting me a gripper diff out, great price Mark, thank you.

Can't wait to get that bad boy fitted

Looking at some recaros but not to fussed about them at the minute ( I don't think ) ha

Cheers guys.

Great news mate, very happy for you.


This makes me want to get my 421's fitted, so thanks alot...lol

 

[Harpham]

Mate, you're taking me out in this very soon!!!

 

[The Russian.]

Great news mate, very happy for you.


This makes me want to get my 421's fitted, so thanks alot...lol

Thanks mate. Sorry Scott, but get it done!!!

Mate, you're taking me out in this very soon!!!

That's fine, I might let you drive too. x

 

[Jekyll]

Good stuff mate! Hopefully it makes a decent gain but as long as it drives good, that's the main thing! Im sure Paul will work he's wonders on it.

Out of interest, what do you think it'll make?

Btw R-Sports Steve has 2 set of trendlines up for sale atm....

 

[NorthloopCup]

Your welcome Jacob.

 

[The Russian.]

Good stuff mate! Hopefully it makes a decent gain but as long as it drives good, that's the main thing! Im sure Paul will work he's wonders on it.

Out of interest, what do you think it'll make?

Btw R-Sports Steve has 2 set of trendlines up for sale atm....

I thought kayzeee had bought them?? Hmmmm interesting.

I'm unsure on what power it will make chap, anything above 150 tbh.

Your welcome Jacob.

 

[Jekyll]

Only a thought...

http://www.cliosport.net/forum/show...AD-PART-2-!!-Get-in-here&highlight=trendlines

 

[The Russian.]

Only a thought...

http://www.cliosport.net/forum/show...AD-PART-2-!!-Get-in-here&highlight=trendlines

Cheers mate.

 

[Cub.]

Great stuff. Mick is a hero. As is Mark.



PS. If you're getting seats get a cage aswell. Man logic.

 

[Rob]

Epic work, epic epic work. Why aren't you more local? Tosser.

 

[SkidMarx]

Cool beans, Could do with having a go if you dont mind mate? Thinking cams myself.

 

[The Russian.]

Great stuff. Mick is a hero. As is Mark.



PS. If you're getting seats get a cage aswell. Man logic.

I would but I need to get my lad in the back, find a cage that would let me do this x

Epic work, epic epic work. Why aren't you more local? Tosser.

Cheers Rob, only a journey away

Cool beans, Could do with having a go if you dont mind mate? Thinking cams myself.

I owe you any way my next mod is EPAS!!!

 

[Coops Mk1]

Glad your getting the love back mate

 

[Craig.]

Tested Dave's epas out tonight and it's proper brilliant setup.

The epas is a great mod to do I've drove my mate kirks (korky on here) & loved it.

great news on getting the engine work done, will be good to see what magic Paul can do when mapping it.

 

[The Russian.]

The car went up to Paul yesterday for the mapping, unfortunately I didn't see above the 180 mark, but with a new lambda sensor as it is knackered and a Decat Paul said I should.

He also said the alloy induction pipe looks to be restricting air as the diameter is pretty small.

I'm chuffed it Made that power to be honest ( I know of a lot that don't ) and it drives and picks up speed pretty quickly and the cams sounds So nice.

Here's a pic and a graph.

Where to go from here power wise I don't know, that's down to cub and the price he can sort later in the year.

 

[Mr R.]

Epic stuff mate.

At least you know the car is running right and at the correct power, would have been nice to see its true power run before the cams.

Im happy for you.

 

[Bobby.]

Cracking little motor mate, very clean and looked after.

Did you ever find out what the knocking noise was?

 

[Mr R.]

Cracking little motor mate, very clean and looked after.

Did you ever find out what the knocking noise was?

Im sure he said it was the diff, LSD and re-built box coming up.

 

[Bobby.]

Oh did he, must of missed that bit then. Two birds, one stone and all that then ahh.

 

[Gray]

Worth mentioning the car had an RStuner map on it already, so the gains don't look as good compared to an untouched engine

Once that gearbox is sorted it will be ALOT better. I didn't think we'd make it home with all the knocking and banging from the 'box lol!!

 

[The Russian.]

Cracking little motor mate, very clean and looked after.

Did you ever find out what the knocking noise was?

Cheers chap, yeah the knocking noise is the diff bearings so having my spare box rebuilt with a gripper diff.

Im sure he said it was the diff, LSD and re-built box coming up.

I'm truly excited for that bit

Worth mentioning the car had an RStuner map on it already, so the gains don't look as good compared to an untouched engine

Once that gearbox is sorted it will be ALOT better. I didn't think we'd make it home with all the knocking and banging from the 'box lol!!

It was horrible wasn't it I'm ringing agency in the morning to confirm and then drop off.

Yeah looking at the alloy induction pipe it looks too small in diameter so going to change that.