Kyles Clio 172 Cup Project

[Jekyll]

Hero wheel!

Feels so much better than standard. Keep it clean bud

 

[Kyle 86]

Hero wheel!

Feels so much better than standard. Keep it clean bud

Haha i feel like getting some gay gloves to wear so i dont get it dirty. It feels a different car to drive now mark with the wheel and the nicer gear change

Done a oil and filter change on her yesterday aswell so its running sweet as a nut. Well have to catch up once yours has had its surgery lol

 

[Jekyll]

Yes bud, maybe get some pics?

I loved the wheel. Suits the cup perfect mate. Unfortunately it's going to happen regarding the wear/dirt on the material but when it gets too far gone, then give snappy a call :wink:

 

[Kyle 86]

Yes definitely get some pics of them soon. Hopefully it won't get to dirty to quick as its hardly used

 

[m&l172ph1]

It's looking good, kyle.
Definitely better without the yellow.

 

[Martin.]

So so so so so clean!

 

[Jekyll]

9th December 2012:

You need to get your steering wheel done like this if your keeping it oem/oem+

http://www.cliosport.net/forum/showthread.php?672774-Steering-wheel-re-trim-(snappy)

The renault sport sabelt one would look nice in yours if your going after market :smile:

Cheers mark ill get it sorted after the new year ill get a pal of mine to take the wheel off for me as im useless haha i like the sabelt but i dont want all the airbag issues and stuff

Now:

Update time. Its been a while but ive been really busy with her

So ive gave the arches a real deep clean and ive recently had the wheels re powdercoated carbon grey and have added a sabelt wheel aswell and a ED short shifter

Heres a few pictures below of what ive been up to

View attachment 129541

View attachment 129543

Just sayin' :wink:

 

[Kyle 86]

9th December 2012:





Now:



Just sayin'

Hahaha how times have changed

 

[Jekyll]

For the better mate!

Your car looks much better than when this project thread was first started and it was nice then! Love it Olly!

 

[Kyle 86]

For the better mate!

Your car looks much better than when this project thread was first started and it was nice then! Love it Olly!

Cheers beautiful

Its come on so far im well happy with it. Just a couple of very small tweaks and its done. Might have to squeeze the B14's in before i take the plunge with the mrs

 

[Jekyll]

Knowsit!

 

[npt]

do you have spacers fitted?

 

[Kyle 86]

do you have spacers fitted?

Used to have but took them off

 

[Kyle 86]

Update

So i treated the cup to more goodies which include TPI wheel bolts and some anodised washers for the engine bay and also took delivery of some Bilstein B14's

 

[Kyle 86]

Also sealed the wheels with Gtechniq C5 whilst they were off aswell

 

[Kyle 86]

And a few pics clean and ready for trax

 

[Jekyll]

 

[Jekyll]

Where did you get your anodised bits from dude?

Bilsteins are gonna be awesome

 

[Kyle 86]

Where did you get your anodised bits from dude?

Bilsteins are gonna be awesome

Got them somewhere on the net ill try and find you a link. Can't wait to get the billies on

 

[Jekyll]

I love the look of the TPI bolts bit they can rust easy if not protected. Shouldn't be a problem for you though :wink:

When you getting the b14's fitted and by who?

 

[Dooby]

Looking stunning as always mate .. Have fun at Trax today. Just a shame I couldn't be there and get them together again at a show ensive:

 

[Waite_87]

Love it mate

 

[Kyle 86]

I love the look of the TPI bolts bit they can rust easy if not protected. Shouldn't be a problem for you though :wink:

When you getting the b14's fitted and by who?

Was debating them after seeing the rust reviews. I really like them now there on

I whacked a bit of sealant on them and ill do it every time i wash it ha

 

[Kyle 86]

Update

Finally got the Bilstein B14's fitted and im really happy with them. The car feels much more planted compared to the V-Maxx i had. Ive still got to set them up properly and adjust the ride height a tad as its sitting a bit low for my liking but ive got a creaking noise on the drivers side at low speed so ill have to investigate it next weekend

 

[Kyle 86]

 

[Kyle 86]

Ill get some more pictures soon. Hopefully ill get the creaking issue sorted its probably something simple

 

[Mr R.]

The rear adjusters are the wrong way round.

Adjusters go to the top.

 

[Mr R.]

007 by Scott Raven, on Flickr

027 by Scott Raven, on Flickr

 

[Kyle 86]

007 by Scott Raven, on Flickr

027 by Scott Raven, on Flickr

Aaaah f**k i thought something wernt right with the rear adjusters as when i put them off they didn't sit flush lol

What do ya reckon the creaking noise could be scott

 

[Jekyll]

Much better! I hoe you didn't call out a mobile mechanic to get them fitted?!

Dont forget the car will need to be aligned afterwards mate

 

[Kyle 86]

Much better! I hoe you didn't call out a mobile mechanic to get them fitted?!

Dont forget the car will need to be aligned afterwards mate

I was surprised i actually got as far as i did. Good learning curve ha

 

[Kyle 86]

@Phase1sr you no the rubber platforms that the spring sits on. Does that stay at the top with the bilstein adjusters or do you put it at the bottom

 

[Mr R.]

@Phase1sr you no the rubber platforms that the spring sits on. Does that stay at the top with the bilstein adjusters or do you put it at the bottom

Just put the rubber ring between the spring and the beam bud, no need for it to go at the top with the adjuster.

Plus it won't fit under the adjuster anyway.

The way you know the adjuster goes to the top is because the text on the spring, the way you have fitted them the text is up the wrong way. 😂

 

[DannyR]

Adjusters go on the bottom?!

 

[Kyle 86]

Just put the rubber ring between the spring and the beam bud, no need for it to go at the top with the adjuster.

Plus it won't fit under the adjuster anyway.

The way you know the adjuster goes to the top is because the text on the spring, the way you have fitted them the text is up the wrong way. 😂

Nice one scott your a star

 

[Mr R.]

Adjusters go on the bottom?!

No.

Top.

 

[Mr R.]

Nice one scott your a star

I have my moments. :blush:

 

[Gus]

No.

Top.

Dont think it matters too much either way. If they are at the bottom it is easier to adjust them as you dont have to take the wheel off.

 

[Mr R.]

It does matter.

So do you go out every week adjusting the ride height of your car then?

I know I didn't, in fact it's easier to adjust.

The spring can only go one way up/only fits onto the adjuster one way.

The writing on the spring shouldn't be up side down.

Kyle, just fit them as I said buddy, don't listen to these clowns. [emoji23]

 

[Kyle 86]

It does matter.

So do you go out every week adjusting the ride height of your car then?

I know I didn't, in fact it's easier to adjust.

The spring can only go one way up/only fits onto the adjuster one way.

The writing on the spring shouldn't be up side down.

Kyle, just fit them as I said buddy, don't listen to these clowns. [emoji23]

This is exactly what me and my pal said that its strange that the writing is upside down lol