Laguna hubs on the Clio Williams

[ClioMaxi]

OK thanks, and did you just drill and tap the rear beam for the 182 stub axles?

yes but you do have to grind a bit off the middle too but thatsthe easy bit. getting the stubs out is less so

 

[ClioMaxi]

you have to grind off the lityle tube bit on the top left

 

[ClioMaxi]

these were the spacers and caliper holders. i looked up and i used laguna 4 stud rear hubs and espace discs then a mix of csliper parts..

 

[GasManLS7]

I'm looking fitting the megane scenic rear beam (99-03) but need to check they fit. Did you ever look at that option?

 

[ClioMaxi]

I'm looking fitting the megane scenic rear beam (99-03) but need to check they fit. Did you ever look at that option?

View attachment 1759408

i never did no. only ever looked at how to modify the original. as with anything i guess there is always a way but i dont know the mounting hole spacings on this one.. look wider.. or the shock spacing.. i suspect that would be your main problem but maybe also change in wheelbase also

 

[GasManLS7]

i never did no. only ever looked at how to modify the original. as with anything i guess there is always a way but i dont know the mounting hole spacings on this one.. look wider.. or the shock spacing.. i suspect that would be your main problem but maybe also change in wheelbase also

Did you change the torsion bar on it?

 

[ClioMaxi]

Did you change the torsion bar on it?

the standard bar is retained but following what renault did on these beams for gr.A i added the option to add an extra external arb. the one fitted in the photos is a front mx5 standard one but i actually changed the front arb setup to take mx5 ones too so there are lots of options on diameter etc for those and you can interchange both front and rear from the same setup so saving 1/2 the cost of options effectively.. just change the bar and bushes.. ive got something like 25 or 26mm front and 19mm rear currently..