ClioSport.net
Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
GDI 227bhp ITB`d 172 cup
before any work was started; (wiv standard number plate lol)
the throttle boddies!!
inlet manifold having work;
work starts;
on the rollers;
andy busy as usual;
the end result, ITB 227 bhp - fuking rapppiiiddddd!!!
massive thanks to GDI for all the work, will put more pic`s on l8r cause i`ve just washed her
the throttle boddies!!
inlet manifold having work;
work starts;
on the rollers;
andy busy as usual;
the end result, ITB 227 bhp - fuking rapppiiiddddd!!!
massive thanks to GDI for all the work, will put more pic`s on l8r cause i`ve just washed her
Last edited:
GDI 227bhp ITB`d 172 cup
got pic`s of the front wiv no grill, will put up in abit. n yes it is the grills either side of the reno diamond that r missing, don`t fink it will cause damage cause there is only the rad (which will get changed for a smaller alloy 1 soon) n the alternator on the other.
M
mini-valver
As long as you don't put them silver grilles back on, looking good! Get the graphs up dude.
more toys!! you b*****d lol, so when do u wanna race me jon
yeah, has got to be done mate, wants a little boost
That vid was on Andy's driveway Stu, we only got upto about 30mph
well, mine will be dropped off soon, you are more than welcome to pop down to GDI and have Andy take you out in it and even have a go yourself if you like
Oh dear, don't know wheather I should or not..........thanks for the offer.........when you droppin' it off?:race:
yeah, has got to be done mate, wants a little boost
That vid was on Andy's driveway Stu, we only got upto about 30mph
well, mine will be dropped off soon, you are more than welcome to pop down to GDI and have Andy take you out in it and even have a go yourself if you like
Oh dear, don't know wheather I should or not..........thanks for the offer.........when you droppin' it off?:race:
going to be dropping it off in the next couple of weeks. I'm basically just waiting for my run about to get tax'd and mot'd. Either way, it will be down there a while as I have nowhere to put it whilst I'm moving house and the work to be done wont be an overnight thing eh Andy? lol
it's just the same as mine, so moved over to one side and tilted yeah. No real point to running an aftermarket rad other than they look better and neater. Rad is last thing on my list and tbh will probably never get done as I'd rather put it towards the engine and handling.
He's Leicester way mate
He's Leicester way mate
Looking good.
I am slightly put off by cutting bodywork to get the ITBs in. I spoke to Jenvey a while back and a custom rad with 22deg bends to point the filter under the slam panel was suggested.
I think with a bit of thought and a custom rad and airbox a much tidier install is possible.
Fair play though an ITB'd cup must be a bit of handful, roll on winter
I am slightly put off by cutting bodywork to get the ITBs in. I spoke to Jenvey a while back and a custom rad with 22deg bends to point the filter under the slam panel was suggested.
I think with a bit of thought and a custom rad and airbox a much tidier install is possible.
Fair play though an ITB'd cup must be a bit of handful, roll on winter
Looking good.
I am slightly put off by cutting bodywork to get the ITBs in. I spoke to Jenvey a while back and a custom rad with 22deg bends to point the filter under the slam panel was suggested.
I think with a bit of thought and a custom rad and airbox a much tidier install is possible.
Fair play though an ITB'd cup must be a bit of handful, roll on winter
nothing has been cut though, it's a bit of plastic that has been removed.
as for the airbox, not seen anyone use them and am guessing there is a reason for that. Foam filter is a lot cheaper too
**edit** damn Clio Sport... lol
Looking good.
I am slightly put off by cutting bodywork to get the ITBs in. I spoke to Jenvey a while back and a custom rad with 22deg bends to point the filter under the slam panel was suggested.
I think with a bit of thought and a custom rad and airbox a much tidier install is possible.
Fair play though an ITB'd cup must be a bit of handful, roll on winter
nothing has been cut though, it's a bit of plastic that has been removed.
as for the airbox, not seen anyone use them and am guessing there is a reason for that. Foam filter is a lot cheaper too
**edit** damn Clio Sport... lol
Air box will be a cost thing. Same as custom rads arent used due to cost.
So is the slam panel completely removed?
Is the slam panel the bit with the bonnet catch in it?
williams 2
no the slam panel is removed. There would be no front if the cross member would be removed although air flow would be fooking awesome lol!!
we left his grille out because he didn't want the metal ones stopping airflow!!
FN2 Type R +MK6 Golf
during mapping on the rollers, circa 5000rpm at full throttle
Nice filming
