Refitting flywheel

[M.C..]

I’m planning on refitting the flywheel and new clutch the weekend what do people use to lock the flywheel so the bolts can be torqued up

Something like this?

https://www.halfords.com/tools/garage-equipment/garage-essentials/laser-flywheel-holding-tool-208606.html?_gl=1*1l6xcfx*_up*MQ..*_ga*MTUzMTA5NTM2MS4xNzQxNTU5Nzg3*_ga_VK44BRER97*MTc0MTU1OTc4Ny4xLjAuMTc0MTU1OTc4Ny4wLjAuMA..

 

[Mr Trailer Man]

That'll work or stick bellhousing bolt in and use a lever bar to counter-hold against the bolt.

Shouldn't take too much effort with 55Nm.

 

[RSRowe]

A pal with a bar on the pulley bolt works pretty well.

Alternatively, if you have the genuine Renault timing kit, the crank locking pin is sturdy enough.
I've tightened the crank pulleys multiple times like that and haven't destroyed anything yet. The flywheel bolts are childs-play by comparison.

 

[Struggler]

Dig dig

Are the flywheel mounting holes equally spaced? How does one make sure they get the notches for the tdc sensor in the right place?

 

[Brigsy]

Dig dig

Are the flywheel mounting holes equally spaced? How does one make sure they get the notches for the tdc sensor in the right place?

Can only get the bolts in one way due to spacing, if they all go in ok its good to go. Use new bolts and torque to spec.

 

[Struggler]

Exactly what I was hoping to hear! Thanks!