Return of the Renault:)

[stonejedi]

Is the front wonky?

Some good touches, much cleaner!

Now you say that it does look a bit off centre but I can assure you that its as straight as its going to get its where the previous owner had a coming together with a high kerb and pushed the bumper out and tried to repair it himself :fearscream:and now its a bit oval Lol,will get it sorted properly eventually but its quite low on my to do list.SJ.

 

[stonejedi]

The job for today was to change over the accelerator pedal and spruce up the foot rest with an added addition.The Gas pedal that came with my car was rubber but the brake and clutch pedal are metal so it looked well...."kind of out of place":blush:So after sourcing a working replacement that functions as Renault intended,I proceeded to swap them over.

How the Pedal and footrest was...

And now...

My car is slowly moving in the right direction but still has a far distance to go until I am happy.SJ.

 

[stonejedi]

Been a while that I have updated my thread...And for good reason I will be breaking my Renault Clio for parts so any parts needed just let me know.As I have now got the Clio model that I originally wanted a'CUP'?so I will be putting my touch on it in 2019...I have been spending to much hard earned money and most of my time on my Subaru...will update with some picks of the Renault once it gets a proper clean.SJ.

 

[20vKarlos]

SJ I wish you’d have posted this 3 days ago!

Just got a pal to buy a non-runner for track use but this wouldve been perfect for him..

I’ll ask a few friends, If I’ve learnt anything from DW, it’s that the decent people tend to stick about and their reputation is very reassuring.

I’ve no doubt that this car will be a decent buy for anyone interested

I want it myself! ??

 

[imprezaworks]

DW?

 

[Jekyll]

Detailing world?

On a side note, I've never seen those harnesses before. They look smart.

 

[stonejedi]

SJ I wish you’d have posted this 3 days ago!

Just got a pal to buy a non-runner for track use but this wouldve been perfect for him..

I’ll ask a few friends, If I’ve learnt anything from DW, it’s that the decent people tend to stick about and their reputation is very reassuring.

I’ve no doubt that this car will be a decent buy for anyone interested

I want it myself! ??

Thanks mate?,i was going to really go to town one the black one,until I was offered my new project car cheap from a trader and the rest as they say is history...plus my wife said one of them has to go as I still have my Subaru and That one is going no where lol?.SJ.

 

[stonejedi]

I don’t know if my new project car belonged to a member off of here,but its come to a good home? and will be getting Modified properly....it will be getting a full detail when I have a couple of days spare,this is how it looked when I picked it up...

.SJ.

 

[stonejedi]

It’s been a while since I last updated my thread I have been trying to raise some money for my Clio project build and to tell you the truth I’m finding it quite difficult as I still have things that I need and want to do with my Subaru.....but I decided today to put my project money woes on the back burner and give my Cup a quick clean up today and a cheapish mod[emoji6]....How she started....

Decided to freshen up the look by losing the amber repeaters and changing them out with clear repeaters and silvertech bulbs...

Also gave the front and rear headlights a quick buff up...but will need to go over them again as I’m not happy with them just yet but will do that at another time when I purchase another headlight polish kit...

Also decided to take off the number plates and give the car a good clean up underneath,i have new plates on order will change over when they arrive...

That’s all for now hoping to get more done on her as soon as the funds allow.SJ.


Sent from my iPhone using Tapatalk

 

[stonejedi]

Not much done really just abit of debadging...

I like the way that some members have put that new style badge on where the Clio badge on the right of the boot is,looks more updated[emoji1417]Their bloody expensive though for what they are loool but I have decided to just get one and stop complaining about the cost...One more thing new wheels ordered inspired by Mbeau choice on the black RS that I sold him[emoji1417]So I’m really looking forward to receiving them,they are an oldie but a goodie and suit the Clio perfectly[emoji1476].SJ.


Sent from my iPhone using Tapatalk

 

[stonejedi]

Well a purchase that I had made a while ago has finally turned up...my new Wilwood four pot calipers[emoji1417].

I was originally going to get Brembo’s as I know that they are a quality caliper”bulky but they work”[emoji6]but decided as I was going to run 15” inch wheels that the Wilwoods was a caliper that can be fitted under them with minimal fuss...As my Cup project is going to be a forged rebuild eventually with some forced induction running through it,I have decided to get as much of the supporting modifications done as possible,before I tackle the heart of my project....My wife decided to give the top hats a spruce up for me,as I had purchased some VHT caliper spray paint...

I am also looking to rebuild and freshen up my rear calipers to match the fronts.That’s all for now folks[emoji6]still waiting on my new 15” wheels to turn up,hopefully they come this week.SJ.


Sent from my iPhone using Tapatalk

 

[Louis]

Well a purchase that I had made a while ago has finally turned up...my new Wilwood four pot calipers[emoji1417].
View attachment 1410844

View attachment 1410845

View attachment 1410846

View attachment 1410847
I was originally going to get Brembo’s as I know that they are a quality caliper”bulky but they work”[emoji6]but decided as I was going to run 15” inch wheels that the Wilwoods was a caliper that can be fitted under them with minimal fuss...As my Cup project is going to be a forged rebuild eventually with some forced induction running through it,I have decided to get as much of the supporting modifications done as possible,before I tackle the heart of my project....My wife decided to give the top hats a spruce up for me,as I had purchased some VHT caliper spray paint...
View attachment 1410848

View attachment 1410849

View attachment 1410850

View attachment 1410851

View attachment 1410852

View attachment 1410853

View attachment 1410854

View attachment 1410855

I am also looking to rebuild and freshen up my rear calipers to match the fronts.That’s all for now folks[emoji6]still waiting on my new 15” wheels to turn up,hopefully they come this week.SJ.


Sent from my iPhone using Tapatalk

Make sure you clean up that mating face before fitting or you'll be constantly retourqing wheel nuts

 

[stonejedi]

Got the complete set of peddles to match my footrest that is now installed in my Cup,will be fitting them next weekend on my day off.

Also finished spraying the fully refurbished rear calipers with VHT calliper primer and a couple coats of VHT black caliper paint...

They will also be getting a wheel ceramic coating added to them for longevity protection to prolong the finish.I will be fitting new rear disc along with new rear brake spacers that I purchased off of George@RTR parts...that I highly recommend for his customer service fast delivery and excellent prices[emoji1417]More to come as soon as the bank manager allows i.e “The Wife”[emoji33]...SJ.


Sent from my iPhone using Tapatalk

 

[stonejedi]

Hello guys and girls, its been a while since I have updated my thread and for good reason,i have had a serious engine problem with my Subaru which is my main project and has been for the last 13 years, so my project Renault has to be ended as some proper money has to be spent on my Subaru,so I have decided that I am going to have to say good bye to my Renault and all associated modified parts,i will be starting a for sale thread as soon as I get over my disappointment and hurt.SJ.

 

[imprezaworks]

Ah gutted mate. Hope whatever happens works itself out.

 

[stonejedi]

After talking to my wife I have decided to keep the Clio and progress with the projectbut it will be put on the back burner for a while until I get my Subaru fully repaired and sorted out,im glad really as sometimes you need another train of thought before you end up making rash decisions...the Clio gets to take another breath.SJ.

 

[stonejedi]

Well my Subaru engine problems are 99% sorted just a couple of small things that need attention but that can be looked at in the late spring...car washed and put to bed until then...

I will be focusing on my Clio now once my monetary level improves i will start buying parts for my forged engine rebuild and start fitting the supporting mods that I already have,really looking forward to getting this Clio project properly moving.SJ.


Sent from my iPhone using Tapatalk

 

[stonejedi]

I have started collecting parts again for turbocharging my Renault Clio 172 Cup,i have planned out the spec for my block,but decided to finish purchasing the supporting mods first i am 90% their now


Sent from my iPad using Tapatalk

 

[BaileyWolves]

Can you do mine as well SJ ? 😂 I have made the decision to do mine too may prove tricky with all that’s going on. Will watch the thread with anticipation mate 👍

 

[stonejedi]

Can you do mine as well SJ ? 😂 I have made the decision to do mine too may prove tricky with all that’s going on. Will watch the thread with anticipation mate 👍

Top stuff mate,i’m glad that your going to do it...When you see the supporting mods that i have just purchased though you might change your mind Lol,i never do things in half’s i either do it properly or i just walk away...

 

[stonejedi]

Right first things first my new turbocharger “GTX2871R” direct from my mate at Garrett turbos,i thought that I would start with the turbo as their is no going back now,plus i have a custom turbo manifold being made up as my turbo will run all round Vband connectors...

More to come of the other parts just taking pictures


Sent from my iPad using Tapatalk

 

[stonejedi]

As i am looking for my car to have a chance of handling the power i thought that a quaife diff would be a necessity...

Sent from my iPad using Tapatalk

 

[BaileyWolves]

Top stuff mate,i’m glad that your going to do it...When you see the supporting mods that i have just purchased though you might change your mind Lol,i never do things in half’s i either do it properly or i just walk away...

I wish I had a mechanical mind mate to go about things myself fair play, will be a drive in drive out for me pal when Andy gets back to me think for what I use the car for will be plenty enough, will watch your updates with interest for cheeky ideas tho 🤭

 

[stonejedi]

And last but not least the brains to eventually keep every part happy,a new Adaptronics ecu and loom...

my wallet is smoking now Looool...

So will have to wait a good few weeks to get the rest of my parts for my project Clio but trust me when i say this little cup will be a killer when I’m finished in a good way though Lol

 

[stonejedi]

I wish I had a mechanical mind mate to go about things myself fair play, will be a drive in drive out for me pal when Andy gets back to me think for what I use the car for will be plenty enough, will watch your updates with interest for cheeky ideas tho [emoji2960]

Mate i will do some of the work myself,but what i cannot do i will get a a specialist to do,so i am still in a similar situation as you are,the only difference being is i know what works and what parts that i want to use on my build which gives me peace of mind to an extent...


Sent from my iPad using Tapatalk

 

[BaileyWolves]

Mate i will do some of the work myself,but what i cannot do i will get a a specialist to do,so i am still in a similar situation as you are,the only difference being is i know what works and what parts that i want to use on my build which gives me peace of mind to an extent...
That’s valid mate what type of power are you looking at? Mine sits at shy of 190bhp at the min so 230bhp will be plenty for me I think

Sent from my iPad using Tapatalk

 

[BaileyWolves]

Makes sense pal I did similar with my ep3 too what type of power you aiming for ? Mines just shy of 190bhp at the min so 230bhp will see me reeet

 

[stonejedi]

Makes sense pal I did similar with my ep3 too what type of power you aiming for ? Mines just shy of 190bhp at the min so 230bhp will see me reeet

Will be 350+ but that is why my project will take a tad longer to others as I am trying to strengthen all surrounding supporting mods as well...230bhp will be quick in a Clio Mate but my Renault 5 turbo i had was around the 250+ mark so i need to push the envelope a bit further with this one

 

[BaileyWolves]

Makes sense mate if your anything like me if you have a plan in your head you do it properly and ensure everything is bang on with the best part. I have spent good money over the past 18 months replacing upgrading everything and anything to make it clean and solid. 350bhp 😲 s**t I can’t even imagine what that’s gonna be like

 

[Gus]

That is going to be incredible! Can't wait to see your updates.

 

[Robclio98]

Looking forward to some updates, love a decent turbo build! I take it your keeping the JC5 box?

 

[NorthloopCup]

As i am looking for my car to have a chance of handling the power i thought that a quaife diff would be a necessity...View attachment 1462333

View attachment 1462334



Sent from my iPad using Tapatalk

Send me a picture of the batch number on your diff mate - you may need to send it back as they’ve had a few issues with certain batch numbers.

I’ve had to send one back to them for a box I’m currently rebuilding for someone. 🤦🏻‍♂️

 

[stonejedi]

Will be getting a full rebuild when

Looking forward to some updates, love a decent turbo build! I take it your keeping the JC5 box?

Will be getting a full rebuild and strengthening as much as the o.e cup gearbox can,i know that they are not the best for handling massive amounts of torque but the gearbox are a hell of a lot cheaper to get right compared to a Subaru 6 speed

 

[stonejedi]

Send me a picture of the batch number on your diff mate - you may need to send it back as they’ve had a few issues with certain batch numbers.

I’ve had to send one back to them for a box I’m currently rebuilding for someone. 🤦🏻‍♂️

Where would I find the batch number mate?

 

[NorthloopCup]

Where would I find the batch number mate?

It’s on the diff mate where the Quaife emblem is engraved/printed/etched

 

[stonejedi]

It’s on the diff mate where the Quaife emblem is engraved/printed/etched

Is this the one mate?


Sent from my iPhone using Tapatalk

 

[Typhoon]

This is gonna be awesome. Nice to see someone charging the F4R and not just opting to go down the Meglio/F4RT route.

 

[NorthloopCup]

View attachment 1462538

Is this the one mate?


Sent from my iPhone using Tapatalk

Yeah that’s the one and it’s not one of the bad batch mate. 👍🏻

 

[stonejedi]

Well I said that I would not spend no more money but after cooking dinner for the wife and giving her a foot massage i convinced my wife to buy me a PMS gear shifter it was not essential but a good friend of mine had a bad accident in his Clio and had the PMS shifter that he purchased a while ago stored up but it was still brand new never fitted...

So I practically stole it off him for a Ton and a bottle of Jack Daniels...RESULT

 

[stonejedi]

Yeah that’s the one and it’s not one of the bad batch mate. 👍🏻

Thanks a lot mate for finding out for me, You had me Sweating!