The Bora.

[Jason_E]

My mate also has some 17" Mams that he's not even using and said I could borrow to see if I wanted them.

TROLOLOLOOL.

Main problem is the fact I need to give up my car for a week to fit air ride and get the chassis notched.

 

[_Tom]

Do it. Im never normally a massive fan of mams but they work on silver air'd Bora's..

 

[Scrooge]

Jason what is the lowest these can go without having to have the chasis notched? One of my rear springs is really rusty so I need to replace it, was looking at some Eibach pros.

 

[_Tom]

Much lower than pro's will take you. The main prob is anything 40mm + is the front d/s rubs the arb

 

[mugglesquop]

body drop is how real fags roll

 

[Scrooge]

Much lower than pro's will take you. The main prob is anything 40mm + is the front d/s rubs the arb

cheers mate.

 

[Adam.]

Depends on the engine as the peanut engines have thinner drive shafts

 

[Scrooge]

It's the 150 derv so the beefy shafts.

 

[_Tom]

Depends on the engine as the peanut engines have thinner drive shafts

Not really. Even the 1.6 shafts still have issues with the ARB.

 

[Ray Gin]

That bagged Bora is nice, extremely illegal lights though, my mate has the same style ones on his bagged mk4 Golf and gets a fair bit of hassle over them.

Looking forward to updates.

 

[_Tom]

That bagged Bora is nice, extremely illegal lights though, my mate has the same style ones on his bagged mk4 Golf and gets a fair bit of hassle over them.

Looking forward to updates.

Not really. They're standard lights with the tiny tinted reverse square tinted red.

 

[.GAZ.]

Wanker.

 

[JoeyD]

My mate also has some 17" Mams that he's not even using and said I could borrow to see if I wanted them.

TROLOLOLOOL.

Main problem is the fact I need to give up my car for a week to fit air ride and get the chassis notched.

This sounds Very promising! Looking forward to updates.

 

[Jason_E]

Just fitted some lovely JL audio front components in the doors. Tomorrow my old sub gets dusted off and thrown in the boot. At least it will have a nice system .

 

[Ray Gin]

Not really. They're standard lights with the tiny tinted reverse square tinted red.

His are the same as the pic, his indicators show up red and his reverse lights show up pink lol

Must be the tint that was used then, I guess.

 

[Ray Gin]

Just fitted some lovely JL audio front components in the doors. Tomorrow my old sub gets dusted off and thrown in the boot. At least it will have a nice system .

Any issues with the comps catching on the windows?

 

[Jason_E]

Naa seem fine mate. Used the Autoleads adapter plates with a bit of dynamat.

 

[Ray Gin]

Nice one, I had issues with mine.

Plans for a remap?

 

[Jason_E]

Maybe. Will see what the future brings! Going to be well busy with work at first, thats the only thing.

 

[Winston]

<3

best be laying dude

 

[Jason_E]

<3

best be laying dude

My static Bora was. The Air one will too

 

[Gaz.]

Air, you old man sellout.

 

[Ray Gin]

You going for engine spacers or a shallow sump?

 

[Jason_E]

Spacers probably!

 

[Ray Gin]

Good man!

 

[RDH]

An Audi with Leather seats. I'm 19, so yes, it was quite the pussy magnet. Mainly because it looked more expensive than it was.

b**ches love money.

I'd say it was more expensive than it looked.

 

[Jon.G]

Silver though. Jeez.

 

[_Tom]

Silver is prob one of the best colours on a Bora imo. Boring but looks clean. Mmmm

 

[scott.p]

The above car looks terrible

 

[Jon.G]

Porsche Twists look ace on these then. Those Merc wheels look OK, but trying too hard to be 'twists'

 

[Plummer]

I like that one above!

 

[VeinAST]

Love alphards!

 

[Phil_ip]

Here's a friends old one before he sold it....

 

[Jason_E]

Gave Havair a ring tonight, and ordered their "Option 1" kit. They have it in stock so he said it should be here friday (With any luck) and I can start getting it sorted over the weekend. I don't by any means expect to get it fitted this weekend, but might finish it off next weekend.

 

[ekaJ]

Gave Havair a ring tonight, and ordered their "Option 1" kit. They have it in stock so he said it should be here friday (With any luck) and I can start getting it sorted over the weekend. I don't by any means expect to get it fitted this weekend, but might finish it off next weekend.

How much did it set you back? Same as on website?

Considering it also.

 

[midge]

I bought my girlfriend a pd130, whats the best re-map we can get? and what power will it make?
I have a golft GT TDI that im going to sell and with the moneys get some wheels and a remap for the bora, its completely stock silver 2000 model atm

 

[Jason_E]

I've heard nothing but good things from Revo, and their prices are good too! Give them a ring as they will give you good advice.

And yes mate, same price as the site. If you want it fitted by them its an extra £200. Chassis notching is £100.

 

[midge]

Just been on Revo site, will take the horsepower from 130-170 and torque from 229-280lbft, thats some result!

 

[Dan-]

Just searched thse on autotrader theres on 12 1.8 petrols for sale in the uk

 

[Jason_E]

Just been on Revo site, will take the horsepower from 130-170 and torque from 229-280lbft, thats some result!

Yeah! 130PD is THE engine to have in these.

Just searched thse on autotrader theres on 12 1.8 petrols for sale in the uk

Sorry, what?