Search results

Went to do a suspension refresh on my PH1, as I've done many times on previous cars and have come up against a brick wall that i didn't expect!. Ive already got a pair of rear 172 cup dampers that i ordered last year, Noticed the genuine front 172 cup dampers were out of stock at RPD, checked...

Evening guys, Got an issue on my 197, I've had an ABS light for a while and the fault code via the RSTuner has been for "REAR LEFT HAND WHEEL SPEED SENSOR SIGNAL", i stuck a sensor on it, no change so put rear discs and pads on it since they were due anyway, of course because its a 197 it...

Im sure someone will have been here before! Got a MK2 PH1 1.2 16v, remote central locking has never worked, both red lights on the keys work fine when pressed, new battery's fitted. Car locks and unlocks fine with the button inside the car and the RAID system. Where is the receiver situated...

There is a rare old beast for you... I don't believe they were ever available in the UK in 5door/2.0 - I did see some in Europe back when I had mine though. -this one is RHD though...

I remember a while back there was somewhere everyone was getting genuine Magneti Marelli injectors from for a reasonable price. Is this still the case? Just checked autodoc and £220 for 4 currently. I see you can get a set of 4 generic ones for around £100 mark but unless there is any known...

Here's one for the gurus, it's got me stumped!! Car is a 2001 1.2 16v sport, it's developed a new noise, it sounds like a very bad wheel bearing but it only does it at 4300rpm! Sounds perfect under that and disappears around 4500rpm. Now before everyone thinks I'm a mad chav ragging about a...

Main CSF Media Thread is HERE: https://cliosport.net/threads/the-csf-2023-picture-video-thread.847610/ Just a few camera phone photos and videos I grabbed while walking about!

Had a search but can't find anything, is there a known brand/part number for pattern part items? I remember the hassle I had years ago with mine when I needed one. Got a rear setup for my RSI to fit and need a pair of cables!

Bit of an odd one here. I'm converting an old ph1 1.2 8v over to 1.6 16v. -Both cars are mk2 PH1, but the 1.2 is a very early car, the 1.6 a very late car. -The 1.2 has a fuel return line, so has 3 lines running under the car (fuel, return and i assume tank vent from the carbon canister?) -...

I'm sure I've seen people on here that buy? Got a manicat from my RSI (pictured on left)

Thought this was worth posting this just because I've never seen a lot of people mention it before. I've slowly been refreshing my 197 over the last year, I stuck new genuine 200 cup dampers and springs on it, changed all the ARB bushes, put a pair of drop links on it, and a set of pilot sport...

I see on the RSTuner website you can buy the licence for the mk3 clio to read the EPS controller and configure it etc. The website states: Can this also be calibrated via Clip? - Reason I ask is my 197 non cup has been converted to full 200 cup spec and I didn't realise the EPS had a...

What do they make them out of????? Found out on my travels locally, no idea the back story!

Bit stumped with this one guys, wipers work as they should when they are working, no sign of any bent or sticky linkage - happens no matter if the windscreen is wet or dry (which rules out drag on the blades overloading a weak motor?) Suddenly the wipers will just stop either at the fully...

Bought this a few months ago with the intention of building a Meglio - It was an excellent base, FF with Cup pack, straight shell, bodywork and wheels in need of TLC and service history lost! But then I left my last job so decided to tidy it up and shift it on and free up the cash, so that's...

This is driving me mad!! my ph1 came with a cone filter so I've sourced and fitted a ph1 airbox for it. Now the new airbox came with the cold air feed which i realised id most likely need to remove the bumper to fit, so fast forward a few months i now have the bumper off and i cant for the life...

Just finishing up on my 197 cambelt change, I had to use a bit of heat to remove the crank sprocket so am replacing the crankshaft oil seal. Now I believe this has probably never been done on this engine, but when I removed the plate that the seal goes into (not sure what its called?!) to get a...

In the middle of my first F4R Cambelt, and I'm positive I read someone on here a while back (@Brigsy comes to mind?!) saying they go OVER the torque setting for the dephaser and exhaust cam nuts. I've had a search and cant find anything so I'm now doubting myself :ROFLMAO:

Anyone done anything aftermarket with the sound deadening at the rear of the engine bay that covers the brake lines etc? mine is falling to bits and I've got the engine out currently. I've sent an enquiry to RPD to see if its still available and cost but was interested to see if anyone has done...

I'm trying to identify if this is a genuine Clio 200 box, it has the following code which points towards a diesel box: But then it also has this sticker peeling off which points towards a 200 box:

My ph1 172 has developed a starting issue. When I put the key in turn it on, everything lights up as it should, immobiliser light goes out as it should, turn it to start and nothing happens, not even a click like you get with a flat battery or dodgy earth. I've confirmed the battery is good...

I'm stumped, no doubt someone will have been here before.... Immobiliser functions perfectly, car starts and runs as it should. Just frustrated me!

Anyone running a supercharger conversion on a mk3? I had a poke around the ex supreme motorsport demo car a few weeks back and I've always fancied a supercharged car. The owner was saying he was currently taking supreme to court as it wasn't running right and they couldn't fix it but I see K-Tec...

The last thing i needed was another project, but I sold my Saxo VTR and my Twingo GT so had a bit of free garage space! picked up this 172 exclusive from eBay. Good bits: *Standard (apart from the rear lights) *Belts done this year *70k miles *underside is like new, my 182Van is clean but this...

FFS.... spotted it on eBay with 20 seconds to go, a quick read of the description and a bid in with a few secs to go and it was mine for £3k, was that a good price? I'm sure the next few days/weeks/months will clarify that!! eBay ad pics... Picked it up on Sunday, my 3 concerns were the 3x...

Guy was buying a Hyundai i30 at work that we had up for sale. He wondered if we would give him anything for his Clio to save him the hassle of scrapping it.... we gave him £350 off the Hyundai for it, after a brief look round it I gave my boss £300 and it was mine! Someone came in looking for a...

Looking to replace my lower arms on the 182 van, when I built it I fitted powerflex black bushes to the arms with new lemforder ball joints but TBH im not a fan of the powerflex bushes, while it does handle well, the ride is a bit harsher than id like, I'm getting creaking from them and I'm not...

Wife picked this up yesterday, really impressed with it, interior is a massive step up from the previous mk4 she had and the 1.5 DCi drives brilliant so far doing 60mpg, compared to the 34mpg of the old 0.9 TCE which was the worst engine I've ever experienced !

I done a search but couldnt find anything on this recently. I know a lot of people were on the look out for a genuine Cup Splitter, looks like its in stock and good to order again! Ragnotti front lip CLIO II R.S. | R.S. Performance Official Store (renaultsport.com)

Bought this at work this week, done just over 60k, is 100% standard which i didn't think still existed!, Standard suspension, standard airbox, even has the standard stereo in the boot which ill stick back in! no 6x9s in the shelf etc lol looks proper tidy underneath, I don't know a lot about...