Search results

i cant say iv noticed it while engine on, i think it goes. I just hope some1 can help us, it f***in annoyin lol

is this when u turn on the ignition on just before u turn the engine on???? i got a 172 and mine has done it since i had it 9 months ago dnt av a clue what it is lol

i had the exact same problem a few months ago, diagnostics showed up throttle peddel/ throttle body, so i checked everything including- thottle peddle/body both messin around with the 2, cleaning them up, switching them with friends parts and new ones, lambda sensors checkin for damage and...

how far does the wheel turn until it knocks??? just before full lock?? 1 turn off the wheel?? and have u got any modifications with the car e.g lowering???

my handrake unit has somehow come off as the bolts have come thru but they obviously wnt go back in as the holes for the bolts are to big now, and its also nearly impossible to get my hand under to put new bigger bolts thru (as there another metal layer underneath so cant access from under the...

yea thats what sucks, theres a plate on the other side and thats what makes it realy awkward :S only way i think it could be done to realy hold it down solid perminantly is to take the handbrake unit out by releasing the cable somehow so i can get my hand underneath and put a new bolt in

I pulled up my handbrake the other day when i parked up and it came loose, took the cover off and the bolts that hold down the handbrake unit have come straight thru :S anyone have any ideas how to fix this??? i found a way but i need to disconnect the cable to take the handbrake unit out to...

Sub is in ;)

thanx alot guys :D , didnt think about that lol

Does anyone know where there is a hole to put power cable thru for my sub??? i cant find anyhole underneath the dash board to the engine bay at all:( If anyone can help it would be much appriciated, its a 172

lovely be doin that now then, does seem awkward lol gota find some tubes now

I cant find a butterfly screw on the front of the box but i found this- Could this be where to top the gear oil up?? (HAVENT ROTATED YET) and thanx I1clio i hope it gets sorted to, goin back to the garage i had the driveshafts done tmz

up early tmz morin so gna check that to, hopefully aint that i just had both driveshafts replaced. It all startd cause i reversed to hard and it popd out and ever since my reverse soundin loud and real bad and drives horrible, other gears tho are fine. Maybe that reason?? maybe driveshaft...

yea it does stink of cats piss, horrible smell lol

good point, i remember when my rover leaked that it did smell realy bad like cats piss, definatly check that when i get chance, cheers Damo Sport and yea gna get it seen to when i can, just wana get it topd up for now incase i need to drive it, id rather top it up for now than have nothin in...

yea 100% just checked it, wiped it all down clean and then drove it and oil is coming from gearbox

Its leaking not loads but enough to leave biggish oil patch on the drive which its never done before:( Thanx for tha, be topping up later

I think either the gearbox saying bye bye or just the input shaft bearings are gone, but its definatly leaking oil so for now until i get pay to sort it does anyone know where to top up the gearbox oil???

I double checked and its also leaking i think gearbox oil???? any ideas where i can top it up???

And reverse is loads louder than before

Is that an easy job to do??? Thanks for the info

I was reversing the 2 days ago and was in a hurry so i reversed quick and it popd out of gear, i thawt nothing of it as my old rover use to do it Then today i noticed a sleight noise from gearbox area but goes when clutch is pushed in, maybe me just bein fussy?? And then i reversed it and it...

iv been doing everything under the sun like stripping everything it could possibly be like the lambda sensors, throttle sensors, throttle body, peddle the exhaust itself etc and it would not go, went to 2 different garages and renault and they couldnt work it out at all unless they stripped...

iv been doing everything under the sun like stripping everything it could possibly be like the lambda sensors, throttle sensors, throttle body, peddle the exhaust itself etc and it would not go, went to 2 different garages and renault and they couldnt work it out at all unless they stripped...

To be honest i have been to renault and they recon if the exhaust is custom made it might be due to pressure, or possibly the cat is on its way out so check that aswell but with mine iv been doing everything under the sun like stripping everything it could possibly be like the lambda sensors...

I think mine is the limbda sensor or the exhaust as that can be a reason as i just had the exhaust done so it could be cause the exhaust is letting pressure out, or the sensor may need a clean or possible but hopefullt not creplacing BUT cant do any of this now til monday :(

Yea its either the new exhaust i had fitted thats not stopping pressure to much or the lambda sensor maybe needin a clean or buggered but more lickly to be the exhaust but no harm in checkin the lambdas cause i cant go back to the garage toll wednesday now :( thanks for the help again, i felt...

i realy dunno where to find the lambda sensors on my 172, can anyone help please???

im gna check a number of things today and what dave said (thanks by the way for that info dave i nhope to god that the same problemcause i did change the battery not so long ago) and if i find it is the problem with the throttle i will be in touch matt black

yea that exactly the problem, all good until my foot all the way down, but it does it whether the engine on or just ignition on i found out last night that it could be the lambda so im gna check and clean it up, and i rang renault and they said it wouldnt be the set mph thanks alot guys