exhaust

Hiya lads/ladies, I’ve noticed a ‘sag’ in my exhaust around the centre section. It’s a Ph2 172, with the standard manifold, Ktec Decat pipe and ktec super sport stealth system. I changed the manifold fitting Kit upon installing decat, I am yet to change the exhaust mounts/hangers but wondered...

Hi everyone, Only me again, with the simple questions. Will I need to change my manifold on my 172 in order to decat? I mean, I have a decat pipe and recently ordered a stealth system, but have no idea whether everything will match up Cheers, Carlos.

I'm currently waiting for some "bolt on" tips for my 197 and wondered if i'm going to have take my diffuser off to fit them? Thanks :)

Hello, I'm new member on this forum. I have a question about build exhaust from Clio182. I'd put this exhaust in my Clio, but not 182. Anybody do this ? Any photos and advice ? THANKS

Anyone used Sound Barrier Material in the boot or anywhere to reduce the drone booming exhaust sound at 70/80mph? This stuff.. https://www.deadening.co.uk/collections/sound-barriers

At the moment I have the Ktec Stealth system on my cup and as you all know you get that booming drone on motorways etc doing about 80 and this is caused by the sound bouncing back up under the car. So im thinking of cutting the rear bumper to fit an exhaust trim and then cutting off the tailpipe...

Hi all, Been lurking on this forum for a couple of months now, decided to finally start a thread for my Arctic Blue FF 182. Picked up the car from a private seller over in Pontefract back in November, paid a fair price given its mileage (~70k) and the crucial belts and timing done in Aug 15 on...

I have just put my new decat pipe and SRN019 exhaust on and it sounds as if there is a blow somewhere when I go to out my foot down like coming from the middle ..... Is this just it needs running in or is something loose ? What am I missing any help ? Cheers

Hello Dear Clio lovers! I'am new at this forum and i want some help and tips from you guys what i can do! :) My car: Renault Clio 2 - 1.6 8V 66KW(90PK/HP) I have googled some exhausts, but i see only for 16V engines and this exhausts: 1. BackBox Cherry bomb exhaust 2. Novus exhaust Is there a...

I'm intersted in getting a new exhaust (cat-back or backbox) for my 1.8 16v. I'm looking for something thats louder and better sounding than stock. Has anyone some suggestions?

Hey guys, I've just bought myself a 2011 1.6 GT line Clio and I would like to to fit an aftermarket exhaust/back box and pipe. Has anyone had any experience with this, is it a simple swap, is there any complications? I'm not looking to swap the manifold or cat, the car has only done 12,000...

Hi guys, In need of desperate help again, after having to replace my exhaust downpipe flange bolts (the sprung ones connecting to the cat) with some regular bolts as a temporary fix while trying to find some replacement ones, one bolt has now shaken loose :(. Does anyone know where I can get a...

Hi Guys, Recently bought the powerflex exhaust bush that pushes into the standard mount. Went to unbolt the exhaust mount and the centre of the three bolts is just spinning now after some considerable force. Im guessing there was a captive nut welded on the back that has snapped off leaving me...

If you go through the top removing the exhaust manifold, what else do you need to undo to be able to push the manifold itself back and get more room between the head and the manifold? I need good access to the starter...

Hello, I've read many resources, searched the forums but I'm still confused about possible exhaust upgrades for F4Rt-762 (Laguna mk2). I wish to replace the stock with something that lets the engine breath easier (and add power), additional noise is not needed, but fine if it's not too absurdly...

Looking at buying a 1.2/1.4 clio mk3 and want to change the exhaust. I am not concerned about perforance just the noise. I have searched for after market perforance exhaust and have struggled to find anything. There are plenty of exhausts for RS and 197 but I was hoping someone would be able to...

Hi guys, I'm new to owning a 182 and either due to a dodgy salesman or my inability to properly check a car over before buying it, the exhaust has completely failed. One month after purchase. I'm in a position now where my local garages won't touch the car due to it being an after-market...

Hey Guys, so I'm sure youve been over this before, I've had a good browse through but i do have one question. Ive got a 2004 clio 182 cup, it has a stainless exhaust cat back and i have a stainless de-cat pipe also, I'm wanting to put the de-cat pipe on but everyone talks about lights and...

Looking at getting a de-cat system set up on my 172 Clio, how do I tell there difference between a 172 and a 182 manifold? Seems difficult to track down a decent priced 172 de-cat pipe but loads of 182 de-cats on ebay etc? So I'm hoping mines has a 182 manifold on it already.

Evening guys, Looking to start doing a few things to my car. Currently got a Mk3 1.4. I've been looking around for exhausts and the like and was wondering if anyone had any an idea of an exhaust that would fit? Looked on a few forums and a lot of people are saying that you have to cut the rear...

What exactly other than bore size differs the 172 catback from a 1.4 or 1.6 catback? Reason I'm asking is a company is offering exhaust systems in stainless steel for 1.4 and 1.6 but no Sports. I asked them if they could make an exhaust with a slightly bigger bore for my 172, but unfortunately...

Hi all Does somebody has the standard rear exhaust boxes for sale for a 182? I'm based in Oxfordshire but travel around often in south and mids UK.

Does anybody have one available, anymake? I only need the centre box really as it has coroded badly. But I would be interested in a full system from CAT back if available. I need it posting to Newark / ng241bu .

Recently purchased a new 182 Catalytic converter due to mine being cracked - The new 182 Catalytic converter didn't fit because it was far too short and used a crush gasket and a clamp whereas the catalytic converter on the car has flanges on both ends. I have had the new catalytic converter...

Need to find and purchase one today. Anyone know what size I need?? Some say 50mm others say 55mm. Even 69mm on eBay!

Anyone got one/seen one/opinion on one? Can see loads about the Ultra and Sport/SuperSport but nothing about the the "Centre Line". http://www.k-tecracing.com/show_product.asp?id=5011

Can this be done easily or at all? Mine is very slightly blowing from somewhere, it's just the excuse I need to go for the MR230 pack which has the exhaust included but knowing Mountune it could be a good few weeks before I can get it fitted. Paste? Bandage? Welding? What are my options?

Hi all, just had a scorpion exhaust fitted and the back box is hitting off the rear beam, i have taken a look under the car and there is hardly any gap what so ever between the back box and the rear beam. what is the problem and the fix? Jordan

Got my scorpion exhaust fitted to the car from the standard exhaust, what a difference! Upon acceleration and high speed I'm getting a high pitched whistle noise what sounds like its coming from the passenger footwell, i have searched this and people seem to think its something to do with the...

Can someone tell me what sort of price a 182 exhaust manifold is from dealer?