TVR Cerbera
Re: Valver Track Car Project Thread
only 6 weeks to go till Marham, crack on
only 6 weeks to go till Marham, crack on
ClioSport.net
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
TVR Cerbera
Re: Valver Track Car Project Thread
Is that the noise coming out of the exhaust or out of the downpipe
Is that the noise coming out of the exhaust or out of the downpipe
TVR Cerbera
ValverInBits
Re: Valver Track Car Project Thread
I don't think theres too much to tell atm apart from the fact that Gordon brown is a w*nker for the price of car tax
Oh and insurance takes the piss too.
"hello, yes, well, It's got a roll cage"
"I'm sorry, we don't insure cars like that"
I don't think theres too much to tell atm apart from the fact that Gordon brown is a w*nker for the price of car tax
Oh and insurance takes the piss too."hello, yes, well, It's got a roll cage"
"I'm sorry, we don't insure cars like that"
Re: Valver Track Car Project Thread
Done a few quotes online and its not looking as bad as I imagined. Admiral multicar seems reasonable with the 182 as well and theyre not usually very good on mods.
Will play them all against each other when I start ringing round. Plenty of hours in at work means I'm good to go though
Done a few quotes online and its not looking as bad as I imagined. Admiral multicar seems reasonable with the 182 as well and theyre not usually very good on mods.
Will play them all against each other when I start ringing round. Plenty of hours in at work means I'm good to go though
Re: Valver Track Car Project Thread
Major lack of updates folks, sorry! Not far off now though.
Replaced n/s driveshaft and brake caliper after the problems with the others (cheers Fred/Foxy). Gearbox oil all back in, brakes bled through with Motul rbf600 fluid and tonight I dropped it back down onto its wheels.
Loads of other bits have happened but Ive not remembered to take pics of anything.
Quick check over with the spanners and I pootled down the road, first time in 5 months or so. Curtains twitched one by one as I went by... they see me rollin'
Major lack of updates folks, sorry! Not far off now though.
Replaced n/s driveshaft and brake caliper after the problems with the others (cheers Fred/Foxy). Gearbox oil all back in, brakes bled through with Motul rbf600 fluid and tonight I dropped it back down onto its wheels.
Loads of other bits have happened but Ive not remembered to take pics of anything.
Quick check over with the spanners and I pootled down the road, first time in 5 months or so. Curtains twitched one by one as I went by... they see me rollin'
Re: Valver Track Car Project Thread
awesome update! Glad its all come back together ok and working. Next jobs just getting it ready for marham i guess?
awesome update! Glad its all come back together ok and working. Next jobs just getting it ready for marham i guess?
Escos, M3E30 & GTT16
Re: Valver Track Car Project Thread
Good work, loving it
Good work, loving it
TVR Cerbera
Re: Valver Track Car Project Thread
Thought I'd try and update with a few things I've missed out through lack of pics.
Dash wiring tidied and pretty much finished
Extinguisher mounted passenger footwell
TomTom socket in and wire tidied
Cage padding cable tied on
Couple of stickers on cage
H&R adjustable camber bolts
Cold air feed to standard air box with K&N panel filter. New gearbox earth strap too.
Orangey/red Motul coolant. Strutbrace also bolted in (had to take struts back out, doh)
Tw*t strip fitted
Arch liners back in, just the upper/rear one
New wipers, £1.28 of JTF's finest.
Sorted the wing mirror situation out. It came with blue ph1 mirrors but they were both broken, so I got hold of another pair of red ph1's and swapped the caps over
Painted the red ones wheel colour, blue ones on for now though. Thoughts?
Awaiting a breather filter to go on here, rather than back into the airbox
Bumper back on and tightened up. Number plate added.
Down on wheels again and back outside
CAF
Headlights working, also fixed the horn.
Nearly there!
Thought I'd try and update with a few things I've missed out through lack of pics.
Dash wiring tidied and pretty much finished
Extinguisher mounted passenger footwell
TomTom socket in and wire tidied
Cage padding cable tied on
Couple of stickers on cage
H&R adjustable camber bolts
Cold air feed to standard air box with K&N panel filter. New gearbox earth strap too.
Orangey/red Motul coolant. Strutbrace also bolted in (had to take struts back out, doh)
Tw*t strip fitted
Arch liners back in, just the upper/rear one
New wipers, £1.28 of JTF's finest.
Sorted the wing mirror situation out. It came with blue ph1 mirrors but they were both broken, so I got hold of another pair of red ph1's and swapped the caps over
Painted the red ones wheel colour, blue ones on for now though. Thoughts?
Awaiting a breather filter to go on here, rather than back into the airbox
Bumper back on and tightened up. Number plate added.
Down on wheels again and back outside
CAF
Headlights working, also fixed the horn.
Nearly there!
M
mini-valver
Re: Valver Track Car Project Thread
Looks proper now dude, complete transformation from when you got it. Credit to you....
Looks proper now dude, complete transformation from when you got it. Credit to you....
Re: Valver Track Car Project Thread
Made a start on cutting the 3mm polycarbonate sheet i'd ordered for the windows and sunroof. They're going to be fixed all round for now, then I might look into adding a slider or 2 at a later date.
Copy the glass onto it
Cutting/tidying tools
Magic!
Horrible stuff to work with when a grinder is involved, dust gets everywhere. Wrong day to wear jeans with a great hole in the thigh.
Found a spare sticker to cover the mess that is the corner of the bonnet
Sunroof cut and bonded in, make-shift weights
172 H&R's in the box, for sale shortly
Other side strips on
Went to get a new pair of tyres fitted onto the 182 wheels so that the Mk1 can reclaim the Willy wheels
Back in the garage with a slight adjustment to the weights
Made a start on cutting the 3mm polycarbonate sheet i'd ordered for the windows and sunroof. They're going to be fixed all round for now, then I might look into adding a slider or 2 at a later date.
Copy the glass onto it
Cutting/tidying tools
Magic!
Horrible stuff to work with when a grinder is involved, dust gets everywhere. Wrong day to wear jeans with a great hole in the thigh.
Found a spare sticker to cover the mess that is the corner of the bonnet
Sunroof cut and bonded in, make-shift weights
172 H&R's in the box, for sale shortly
Other side strips on
Went to get a new pair of tyres fitted onto the 182 wheels so that the Mk1 can reclaim the Willy wheels
Back in the garage with a slight adjustment to the weights
TVR Cerbera
Re: Valver Track Car Project Thread
LMAO at your weights for the sunroof!
LMAO at your weights for the sunroof!
