Clio Cup Racer No28 Rally Car

[Nathan Evans]

Id thought I’d start a new thread for the new car.

If you don’t know the build for my old car is here.

Clio 172 cup rally/race/track car

] A few months back now I bought a msa logbooked clio rolling shell. The plan was to buy a donar car for the engine and brakes and make one car out of the two. I ended up buying this 172 cup off eBay, it had bucket seats, coilovers and sabelt wheel. But I got offered to much profit on the...

cliosport.net

I bought an already rally converted ex Clio Cup race car. It wasn’t in too bad condition but it hadn’t rallied competitively in a few years so I knew it would need work to get it where I want it.

 

[Nathan Evans]

The strip down started after a few blasts up and down the industrial estate

 

[Nathan Evans]

Engine, gearbox and interior all removed ready for paint

 

[Nathan Evans]

Making the most of the good weather and painted the inside of the doors.

I also picked up my fibreglass tailgate, bonnet and tank guard from Magnum Motorsport.

 

[massiveCoRbyn]

Looking forward to this one!

 

[ROO1]

Looks good

 

[Nathan Evans]

Inside has now been refreshed, off to the body shop next week for the outside to be done. The inferno orange will be gone 🙂

 

[massiveCoRbyn]

Can't wait to see it painted. The exterior colour was a really odd choice.

 

[Nathan Evans]

Off to the body shop tomorrow and still undecided on what colour to paint it 😂

Subframe off and normal 172 on for the time being so I can get the reigers serviced and springs changed to my liking with a helper spring added as well.

Will paint the subframe whilst it’s off and will source some more hubs as ones had a repair where the pin fits.
I know they’re supposed to be 2.2 or 2.0 Laguna hubs but the part number come back with all models from 1.6, 1.8, 1.9dti, 2.0 and 2.2d

 

[massiveCoRbyn]

Those rose joints on the outer still worry me a bit.

As for colour, maybe just white so it's clean for some vinyl? Yellow? I like yellow

 

[Nathan Evans]

Those rose joints on the outer still worry me a bit.

As for colour, maybe just white so it's clean for some vinyl? Yellow? I like yellow

If you look at anything f2000 or maxi they all use a similar style wishbone that’s fully rose jointed. Time will only tell i suppose. The pin snapping seems to be more common.
I have thought about yellow myself, like the cup racer press car

 

[massiveCoRbyn]

Yeah I guess you're right. I think the quality of the joints makes a big difference. Just a bit of a concern as I knew a guy in Denmark who broke a couple on an Escort like my old one. Hopefully yours will be alright.

Yellow would look good. I'd probably stick to a flat colour, just so it's easy to match. RB would like quite good, but a factory colour would be a bit boring.

 

[Optimista]

Me likey a cup racer

 

[Nathan Evans]

Repairs finished on the arches and doors and I picked up the paint this morning so hopefully have it back on Friday

 

[ian-speedy]

Did you buy this car from Bridgend?

 

[massiveCoRbyn]

And the colour is...

 

[Nathan Evans]

Did you buy this car from Bridgend?

Yeah off Haydn

 

[ian-speedy]

Thought it was , very similar spec to mine

 

[Nathan Evans]

Thought it was , very similar spec to mine

It will be once it’s finished, this car wasn’t great spec to be honest but it should be a good little car once I’m do with it. Only thing I’m keeping really is the shell, beam, wishbones, front reigers and box. Everything else is going to be new

 

[ian-speedy]

Has it got Reigers on the rear , as that make a massive difference to the handling , I have my engine coming back from PMS this week having had a full rebuild and upgrade , so at least looking for more torque , they recon around 200 lb ft , it was 242hp so a little more would be nice , also gone for one of there exhaust manifolds so should make a lot better , although it was good before.
I have PMS front arms on mine , and I need to get it set up properly when back together , as I did Jersey rally last after fitting them and not testing it , and it was pulling me all over the place , was a right pig to drive , with all the race car arms and ARB you could drive it 1 handed , in Jersey it was pulling the steering wheel out of my hand , if I can't get it driving like that again i'll go back to the race car set up

 

[ian-speedy]

Regarding the hubs , they weren't fitted to all Laguna's , I think it was the 2.0lt diesel , i'll have to check what I had , I have bought a few over the years , but did buy a pair all reconditioned and built up which are in my spares pack from PMS , but just noticed it says no stock , it's cheap enough to buy these complete when available

Reconditioned Laguna Hubs and Uprights

A set of reconditioned Laguna 4 stud hubs and uprights. These are required to fit our adjustable wishbone package for all Clio 2 models. These are second hand units, s

www.pure-motorsport.co.uk

 

[Nathan Evans]

Regarding the hubs , they weren't fitted to all Laguna's , I think it was the 2.0lt diesel , i'll have to check what I had , I have bought a few over the years , but did buy a pair all reconditioned and built up which are in my spares pack from PMS , but just noticed it says no stock , it's cheap enough to buy these complete when available

Reconditioned Laguna Hubs and Uprights

A set of reconditioned Laguna 4 stud hubs and uprights. These are required to fit our adjustable wishbone package for all Clio 2 models. These are second hand units, s

www.pure-motorsport.co.uk

No it doesn’t have reigers in the rear, just some cheap looking track coilover. I’ve been speaking to zoltan this morning about servicing the front and he’s getting me a price for the rear. I do have r3 ohlins 3 way on the blue car, so may end up taking the rears off that.

Yeah I think I’ve found some hubs now but there are loads of used ones on eBay at the minute as well. So not as hard to find as I thought they’d be.

 

[ian-speedy]

No it doesn’t have reigers in the rear, just some cheap looking track coilover. I’ve been speaking to zoltan this morning about servicing the front and he’s getting me a price for the rear. I do have r3 ohlins 3 way on the blue car, so may end up taking the rears off that.

Yeah I think I’ve found some hubs now but there are loads of used ones on eBay at the minute as well. So not as hard to find as I thought they’d be.

Just make sure they are the correct hubs , some of them are too thin where they fit into the strut

 

[Chambers_RS]

No it doesn’t have reigers in the rear, just some cheap looking track coilover. I’ve been speaking to zoltan this morning about servicing the front and he’s getting me a price for the rear. I do have r3 ohlins 3 way on the blue car, so may end up taking the rears off that.

Yeah I think I’ve found some hubs now but there are loads of used ones on eBay at the minute as well. So not as hard to find as I thought they’d be.

I can’t find these got a link by any chance?

 

[Nathan Evans]

I can’t find these got a link by any chance?

Have a search of Laguna b56 or k56 hub, knuckle or axle. Have to think outside the box cause hub doesn’t bring much up but axle and knuckle does

 

[Speedo Gonzales]

I hope you're painting it Stabilo Pink!

 

[Nathan Evans]

 

[Nathan Evans]

Whilst it’s getting painted I’ve got some pictures when previous owners had the car and it might of been Charlie Butler Henderson’s car from the 2003 season as his name with on the ecu. Not sure if I’ll ever be able to find out but pretty cool none the less.

 

[Nathan Evans]

Had a few parts come through the post this morning.

Carbon fibre insert for the dash and some new bumper pods which will be getting dipped in carbon fibre.

Also picked up some cup racer wishbones as a set of spares.

The shell isn’t finished yet bit

 

[Nathan Evans]

Strip down of the front hubs this week after building up the cup racer wishbones and I found a few issues with what was on the car.
Not sure why they’d pay for the job on the adjustable wishbones to them then not use the correct size rose joint.
They’d just ground the pin smaller so it fitted into the joint!! The pin was also bent like a banana too, to match the pms track rod end which was also bent.
I’ve decided to get rid of the adjustable wishbones and fit the cup racer ones with new pins and bearings.
I’m still undecided whether to buy a new bump steer kit or just buy new inserts and run standard track rod ends

Few more panels collected, just the shell next

Door bullets sanded and carbon wrapped. I am having a few parts carbon skinned so tried wrap first to see how it would look

 

[Nafoff]

This is going to be one posh rallycar.
#becauseracetart

 

[Nathan Evans]

Picked the car up today and the colour looks better than I ever imagined. The pictures don’t really do it justice, it’s so bright.
Spent most of the evening getting the seat fitted, now I can work everything around that with the extinguisher going behind it.

 

[NorthloopCup]

Looks really good mate! Diff coming back to me next week, so it’ll be all systems go on the sadev after that 😎

 

[massiveCoRbyn]

Love it!

 

[Twingo 1??]

I do like a red rally car

 

[Optimista]

That looks proper.. Btw can you tell me is the exhaust 2,25" or 2,5"?

Im thinking about a new setup on my stock ph1, currently 2,5" is on it, its very loud and although it has 3 mufflers, it's drony as hell..
Dont know if it benefits so much from 2,5" exhaust in terms of power, but i think that 2,25" would be more silent and daily friendly.

 

[Tomo3292]

@Nathan Evans what's happened to the giant killing blue blur. I've seen it for sale, any movement on it this far? Be great to see you in the next spec up, especially shorter small single venues.

Also When you looking at 1st event? Anything in the pipeline yet?

 

[Nathan Evans]

That looks proper.. Btw can you tell me is the exhaust 2,25" or 2,5"?

Im thinking about a new setup on my stock ph1, currently 2,5" is on it, its very loud and although it has 3 mufflers, it's drony as hell..
Dont know if it benefits so much from 2,5" exhaust in terms of power, but i think that 2,25" would be more silent and daily friendly.

I’ve got a pure Motorsport exhaust which is 2.5” which is designed to pass noise tests for Motorsport

 

[Nathan Evans]

@Nathan Evans what's happened to the giant killing blue blur. I've seen it for sale, any movement on it this far? Be great to see you in the next spec up, especially shorter small single venues.

Also When you looking at 1st event? Anything in the pipeline yet?

My brother has sold his civic and bought the blue car off me minus a few parts I’m taking over onto this one.
It will be pretty much identical spec to when I had it, just on 45mm bodies not 48mm.
Currently having the gearbox rebuilt and diff serviced, as soon as that’s back we can start building it back up

 

[Nathan Evans]

Started on the rear of the car today. New Renault rear discs, new 182 stubs, AI Tech studs and copper nuts and pms 10mm stub axle spacers.
Previous owners again coming up with some funny bits. 172 cup stub on one side and 182 on the other 😂 Also no washers behind the discs so the bearings would of lasted 5 mins. I had to remove them off a spare beam I have.

Then rear bumper, lights, side strips and fuel cap fitted.

Hopefully get a bit more done tomorrow