What's new
By:
Filters
ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • When you purchase through links on our site, we may earn an affiliate commission. Read more here.

-Danman-'s Mk2 1.6



B

Brad Smith

  BMW 330ci
Re: MY CLIO 1.6 PROJECT

Number plates look good mate. Really improves the front and the back look better with plain on. Can't wait to get mine on now. Should hopefully be here early next can't wait to get them on :)
 
alexr19

alexr19

  TT QS
Re: MY CLIO 1.6 PROJECT

-Danman- said:
New number plates came this morning and I fitted them fairly easily while my gf was on her driving lesson :)

The screws were very rusty and it was covered with dead flies and dirt behind the old ones but after a good clean and lots of foam sticky pads, there on! :)
Here's some before and after pictures... :D


Before:

IMG_2468.jpg


After:

IMG_2470.jpg



Before:

IMG_2471.jpg


After:

IMG_2478.jpg



And to finish it off, here's a picture of the whole car :D

IMG_2472.jpg


Needs a good clean I know, really cba in this weather, as long as I get it done before the meet next week I'm happy :)
Click to expand...


smartens it up no end. nice to see one the same colour as mine coming along nicely


anyone going to start the gf/sister banter from the picture? haha
 
D

-Danman-

Re: MY CLIO 1.6 PROJECT

chapperzuk said:
Looks much smarter dude! Those numberplates make a big difference. I'd go for some clear side repeaters and do some colour coding on the bumpers, side strips, etc. :)
Click to expand...

I know, especially since there not cracked and faded like the old ones :p



brad-smith said:
Number plates look good mate. Really improves the front and the back look better with plain on. Can't wait to get mine on now. Should hopefully be here early next can't wait to get them on :)
Click to expand...

Cheers :) what size did you go for in the end, 520mm x 90mm?



seltking said:
looks good mate nice progress
Click to expand...

Yeah thanks, coming along quite nicely so far :approve:



alexr19 said:
smartens it up no end. nice to see one the same colour as mine coming along nicely


anyone going to start the gf/sister banter from the picture? haha
Click to expand...

Yeah just had a look, mine looks pretty similar to how yours started out :)
Lmao, I wouldn't be suprised mate xD
 
D

-Danman-

Re: MY CLIO 1.6 PROJECT

Got a nice finish on the headlights today, My dad showed me how and it took about 45mins all together.
Firstly we used 1200 wet + dry paper to get rid of the deep cracks and then moved onto 1500 which isn't as coarse.
After that I used some rubbing compound, this got rid of most of the smaller marks.
Finally we put T-Cut on them to take a small layer of plastic off and make them smooth.
Auto-glym wax polish was then used to clean the surface and get rid of any smearing :)
... Pics coming soon :)
 
D

-Danman-

Re: MY CLIO 1.6 PROJECT

No idea why I didn't take pictures of the same headlight being done but nevermind :)

Before, bit hard to see on the picture but it was covered in little cracks which was holding in dirt:

Before.jpg


After 1200 wet + dry paper:

1200.jpg


After 1500 wet + dry paper, you can see the difference from 1200 - 1500:

1500.jpg


Rubbing compound:

Compound.jpg


Nice and shiney (T-Cut and polish) :

Clean.jpg


Yay :)
 
seltking

seltking

  clio 1.2 16v dynamiq
Re: MY CLIO 1.6 PROJECT

headlights look great mate iv got to do the same to mine once i have got the left ones misting problem sorted haha
 
D

danzel

  Mk5 Ibiza Cupra
Re: MY CLIO 1.6 PROJECT

Great results from the headlight correction, when I did it to my old mk2 though the clusters started steaming up inside though :(

needs silvervisions!
 
seltking

seltking

  clio 1.2 16v dynamiq
Re: MY CLIO 1.6 PROJECT

-Danman- said:
Cheers man :) water got inside the headlight unit then? :/
Click to expand...

yeh mate more of a misted up window look than water washing around though, previous owner fitted HID's and didnt do it proply units arnt sealed properly as he cut slits in the rubber seals at the rear (rubber access cap) instead of pushing the wires through a hole and sealing them up lol not a big issue just annoying theres a pik on my thread.
 
D

-Danman-

Re: MY CLIO 1.6 PROJECT

seltking said:
yeh mate more of a misted up window look than water washing around though, previous owner fitted HID's and didnt do it proply units arnt sealed properly as he cut slits in the rubber seals at the rear (rubber access cap) instead of pushing the wires through a hole and sealing them up lol not a big issue just annoying theres a pik on my thread.
Click to expand...

Ooh right okay, not a massive job then :) and yeahh just had a look, cars looking well though! I'm liking the boot :)
How much did the springs cost mate?
 
seltking

seltking

  clio 1.2 16v dynamiq
Re: MY CLIO 1.6 PROJECT

-Danman- said:
Ooh right okay, not a massive job then :) and yeahh just had a look, cars looking well though! I'm liking the boot :)
How much did the springs cost mate?
Click to expand...
got my springs from k-tec £110 i think could of got them cheaper off ebay but theres alot of chinesse fake stuff on there so thaught get them from somewhere that if the break i can send them back haha
 
seltking

seltking

  clio 1.2 16v dynamiq
Re: MY CLIO 1.6 PROJECT

exatcly what i thaught mate, least with them u get what you ordered haha
 
D

-Danman-

Re: MY CLIO 1.6 PROJECT

Got a text from my sister earlier to say a big round parcel has come for me :D
That'll be the Skoda splitter so I'll be getting that fitted soon when I've got time :)
 
Jakey92

Jakey92

  RS172 Flamer
Re: MY CLIO 1.6 PROJECT

Very nice mate! I've got too have the exact same car (Same colour/Same Engine). Might think about starting a new project thread myself :)
 
D

-Danman-

Re: MY CLIO 1.6 PROJECT

brad-smith said:
Was thinking of getting one. Will wait and see what yours looks like lol.
Click to expand...

Haha fair enough, I'll try and make a good job of it then :) apparently you have to trim it a bit as it's slightly bigger than the standard splitter :S

Jakey92 said:
Very nice mate! I've got too have the exact same car (Same colour/Same Engine). Might think about starting a new project thread myself :)
Click to expand...

Thanks :) you done anything to yours or is it standard atm? :)
 
seltking

seltking

  clio 1.2 16v dynamiq
Re: MY CLIO 1.6 PROJECT

mines dropped 40mm its just right for as theres loads of speed bumps by mine. you will have to post some piks with the splitter on mate, how much did it cost you if you dont mind me asking?
 
B

Brad Smith

  BMW 330ci
Re: MY CLIO 1.6 PROJECT

Yeah you just have to trip the end off a little bit as they will hang over otherwise mate.

Have you thought about getting coilovers rather than springs ?
 
D

-Danman-

Re: MY CLIO 1.6 PROJECT

seltking said:
mines dropped 40mm its just right for as theres loads of speed bumps by mine. you will have to post some piks with the splitter on mate, how much did it cost you if you dont mind me asking?
Click to expand...

Yeah there's loads round where I live too so maybe 40mm would be a good idea and yeah I will do :) It cost £12 from Skoda Parts


brad-smith said:
Yeah you just have to trip the end off a little bit as they will hang over otherwise mate.

Have you thought about getting coilovers rather than springs ?
Click to expand...

Shouldn't be too hard :)
And I haven't thought about coilovers, purely because of price really, maybe if I could find some cheap ones or something :p
 
B

Brad Smith

  BMW 330ci
Re: MY CLIO 1.6 PROJECT

There was some Raceland ones, which I have got, and Im sure I got them for £140. Hard to find some now, but they do come up on here and on eBay under different names lol.
 
Jakey92

Jakey92

  RS172 Flamer
Re: MY CLIO 1.6 PROJECT

-Danman- said:
Thanks :) you done anything to yours or is it standard atm? :)
Click to expand...

It looks just the same as yours essentially: Tinted Windows, Standard Alloys in Gloss Black, Rear Badges sprayed black, Front Badge Carbon Wrapped, With a custom exhaust, H.I.D's and Sunstrip :)
 
D

-Danman-

Re: MY CLIO 1.6 PROJECT

brad-smith said:
There was some Raceland ones, which I have got, and Im sure I got them for £140. Hard to find some now, but they do come up on here and on eBay under different names lol.
Click to expand...

Guess I'll have to keep my eyes open then :) not looking to lower it just yet but can start looking lol :p

Jakey92 said:
It looks just the same as yours essentially: Tinted Windows, Standard Alloys in Gloss Black, Rear Badges sprayed black, Front Badge Carbon Wrapped, With a custom exhaust, H.I.D's and Sunstrip :)
Click to expand...

Haha twins :p shame were not from same area, cars would look good together :)
 
D

-Danman-

Re: MY CLIO 1.6 PROJECT

Put the CS decal on this morning after a giving the car a good clean

IMAG0165.jpg


Then it was off to the meet at The Lincoln Pride Pub.

When I first got there, there was only one other person waiting and after a while we thought no one else was coming.
Then slowly, everyone else turned up, think there was about 10 of us in total :)

IMAG0167.jpg


Batsey has made a new thread with loads of photos from the meet if you want to see :)

http://www.cliosport.net/forum/showthread.php?620090-Lincolnshire-meet-15-01-12
 
D

-Danman-

Re: MY CLIO 1.6 PROJECT

Here's another photo from the meet :)

clio.png


And here's my car at college, my mates thought they'd play a little joke on me :p

cliopostit.png



UPDATE: Going to try and fit the Skoda splitter tomorrow if I can find the ramps :)

Self tappers or rivets? Hmm... :S
 
You must log in or register to reply here.

Similar threads

TheBandit
The Bandit | Monaco 172
2
Replies
59
Views
9K
TheBandit
TheBandit
sevenfourate
sevenfourate's OEM+ RB200........
Replies
7
Views
3K
cpaterson76
cpaterson76
mart.z.s
Mart.'s 172 Cup
2
Replies
58
Views
10K
mossyv6
mossyv6
RuskiWeldFab
ilya's 172 #BECAUSE_RACE_CAR
14 15 16
Replies
618
Views
102K
Nafoff
Nafoff
Molzo
My Clio Mk3 Dynamique 1.2 tce sx
Replies
5
Views
8K
07cliosx
0


Top