Little B******s

[Vern]

looked out the window while on the phone last night , guess what there were 3 kids tryin to nick my blue alloy dustcaps!!!!

banged on the window shouted a few choice words and away they scarpered... just as well there on tight with a spanner otherwize they been away with them ... Hmm

time to invest in some richbrook locking ones

 

[_Kenny_]

cheeky wee f*****s

 

[FlameR]

Little pikeys

I've got those locking ones from halfrauds. They are just p1ss annoying when you need to take them off when a tyre is low!!

 

[C.slicker]

A friend of mine used to have looking ones. They were stolen and the also ruined the valve too!

 

[dick]

black plastic ones all the way.

 

[Andy1.2]

easier way of saving your dust caps is to put vaseline or some lubricant all over them so thye cant get enough grip to twist them off. When you need to take them off, just get an old cloth and get all the grease off. And the little s**** get greasy hands too lol.Job sorted!

 

[cat171]

Watch out tr33 - as next time they might just come back with some tin snips & cut your valves off & get the valve caps that way !

If they do get them let us know & i'll go & loot the ones off of the geezer up the roads mondeo (joke)

 

[dazraffan]

looked out the window while on the phone last night , guess what there were 3 kids tryin to nick my blue alloy dustcaps!!!!

banged on the window shouted a few choice words and away they scarpered... just as well there on tight with a spanner otherwize they been away with them ... Hmm

time to invest in some richbrook locking ones

thats what happens when you live in hartlepool

cheaky little monkey hanging f*****s

 

[rctempire]

PS - Locking ones can sometimes sheer off when applied and ruin the valve and then you have to buy a new tyre anyway.

Ohh and the grease trick, i had them on mine but not for the outside, the inside of it so it didnt bond with the valve, be aware because of this my wheels are a b**ch to clean due to the grease on the wheel, ruined a few sponges on them trying to get them clean.

 

[TheKing]

yeh they'll prob be back for them

 

[scala]

I went for the spinning valve cap giblets from Halfrauds after some pikey 13 year olds stole 2 of my chrome valve caps. 1 of the remaining chrome caps is currently sitting in the barrel of my airgun, waiting to discharged at high velocity should they come back for another go.

 

[BSC 182]

Same happend to me just the other day, young lad walking past and he dissapeared down behind the drivers rear wheel, he took the valve cap and tryed to let the tyre down aswell but he ran off before i cud get to him i was rageing !!!!!!!!!!!!!!!!!!!!!!

 

[Shindig]

I went for the spinning valve cap giblets from Halfrauds after some pikey 13 year olds stole 2 of my chrome valve caps. 1 of the remaining chrome caps is currently sitting in the barrel of my airgun, waiting to discharged at high velocity should they come back for another go.

ohh i am sure that would at least make a bruise

 

[stooby]

i had some chrome valve stem covers and they were nicked n'all.. when i bought the lockin ones the guy said that the little feckers nick em for their bmxs n s**t.. i bought the lockin ones but they easy to get off without the keyring bit so am just waiting for those to go now too.

 

[Fletcher]

black plastic ones all the way.

Yep.

 

[DebV6]

Cheeky buggers

 

[Ian_182]

Give them a couple of years practice and they'll be back for your seats

ian