ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • When you purchase through links on our site, we may earn an affiliate commission. Read more here.

LY kangoo 172



Ben perry

ClioSport Club Member
  Clio 172 cup
Updates!! Got engine hanging in there just need to finish chassis rail and strengthening also need to strengthen the cam chain end mount. Need to notch subframe a little and make the dog bone fit but at least it’s in there!!
47A7CC60-FD25-49A2-A8BB-81DD25D5188D.jpeg
52CD950E-BC1C-4437-B487-C4C4917D615E.jpeg
6D230C96-DC1C-4F8C-AC1E-1D467B9521EA.jpeg
5731C2FE-F945-4FEA-B644-A469583C61DA.jpeg
1EEBBD40-6FFB-4234-B153-2F4A8A58C723.jpeg
6E28A789-6DE2-469B-A359-0D145E05A1BA.jpeg
F7263B0F-B9FD-4300-A4D9-5AA4F0A8144D.jpeg
948145E1-7CC9-40FC-A3A5-62D751D2CEFA.jpeg
 

Ben perry

ClioSport Club Member
  Clio 172 cup
So update time.. got all the mounts finished also had to notch subframe but all in and clearing so that’s good 👍
Also got exhaust mani and flange tac welded together and that clear the body subframe and even lined up with the system 🤷‍♂️ Don’t ask me how!! Next got to get my drive shafts lathed up so I can weld them up!!!
9612801E-9B94-413C-974D-8A7AA20A1C4B.jpeg
A5F2D6C6-6DAC-45DE-9C03-6488A6E415D5.jpeg
968E9B37-5275-43B8-9305-4F726E13F69C.jpeg
2FD50306-9C7F-458C-AA02-B80825E119F7.jpeg
12E9424A-9F7A-46D8-9713-E044060A14FE.jpeg
4C49DC38-8E91-41C6-9674-6D826537A72B.jpeg
0C1E5C96-D573-4674-9A9F-2BAD138FE980.jpeg
0CBEED0D-25C1-43FB-877D-499E9899D030.jpeg
0727503B-FCFA-4717-B246-F5D4901D69FE.jpeg
 

Chambers_RS

ClioSport Club Member
  Clio 172 Cup&Leon K1
Awesome work. Jammy fucker with the exhaust manifold 😂

reckon all the pipe work is ok and not over stressed being squeezed closer?
 

Ben perry

ClioSport Club Member
  Clio 172 cup
Awesome work. Jammy fucker with the exhaust manifold 😂

reckon all the pipe work is ok and not over stressed being squeezed closer?
Cheers mate and I know!!
I did wonder that.. I was thinking of welding some plates between the primary’s a inch or two away from the flange
 

Ben perry

ClioSport Club Member
  Clio 172 cup
My man on the exhaust manifold! Didn't expect it would work that perfect mating up to the exhaust system!! 😂

Cheers!! Ididn’t either mate I guess I got k20 Cylinder head same position as 172 😂😂 Gotta have some luck now and then!!
 

Ben perry

ClioSport Club Member
  Clio 172 cup
Probably loads better now than the cheap mani that is in the custom production kit!
Yeh mate they are a toyo sports but v banded I mean the 182 is a very nice manifold with decent size primary’s and it’s designed to fit through subframe arb and rack anyway so thought would be close and I had one so only had to buy a flange so it’s owes me £20 😂👍
 

Ben perry

ClioSport Club Member
  Clio 172 cup
Little update got all the mount bits painted in satin 2k and inner wing treated etched sealed then painted engine was built up with new billet flywheel and new H/D exedy clutch kit and it’s in there for good now and the clutch seems to work.. little heavy but was expected washed all the shitty Workshop dust off to!!
11616BE7-4125-4C1A-AD7D-E31ABCBD229C.jpeg

0791DE66-4C26-4A53-A462-B86C4ED2EE50.jpeg
46C4C4E9-7997-40C3-A00D-8767CC150BD3.jpeg

BEF897E2-8E0E-4E25-9BDC-EB14D6E9E5CF.jpeg
F210E75B-9A6B-495E-A8FA-6D13CDA5B81D.jpeg
EF24CE68-4407-42F0-B2BF-77065A4522B7.jpeg
A6CB3691-329B-4E1A-9CE6-4DE57AED4862.jpeg
45F8ED59-B969-4775-8AAB-EC05A4C51A97.jpeg
E3FF8781-E0BE-445D-8423-833C09FA9E87.jpeg
 

Ben perry

ClioSport Club Member
  Clio 172 cup
Little update since still waiting on drive shafts I thought I’d get on with a few little bits so I modified the inlet manifold as it was cheeper to buy it Unmodified as it’s got a water jacket on it that need cutting off and I also bored it to 70mm to match the throttle body adapter I’m running stock throttle body atm will probs go 70mm eventually.. when I boost it 😂🤷‍♂️ Also made a adapter to run the ph1 pedal not sure if happy with the position so may do that again and also made a battery tray to run a pc680 so getting there!!
126B8FEA-CC5E-471D-978B-D4F426212F8F.jpeg
3C63BE7D-9573-4AA0-A272-A1412D63CA1E.jpeg
A582EFC5-1763-4690-9F64-4954503DB844.jpeg
74A53685-C9FD-4CCF-9252-4F00F7ACAE71.jpeg
26F2F40C-C5EB-4F86-B5A3-285E38D98A42.jpeg
D32E1FF6-C428-4C85-90CE-6C5866395F46.jpeg
D98AF011-9208-4B93-B837-64E14E86770E.jpeg
05E4D25C-A660-41A0-BAB1-6C5E38EB5A64.jpeg
CD96A14E-FB33-4072-A983-2A49851C7B89.jpeg
375E373D-F42A-4BC7-A58F-0C235EB852A2.jpeg
 

Ben perry

ClioSport Club Member
  Clio 172 cup
Update!!!
Getting through the jobs so I ended up redoing the throttle pedal as wasn’t happy with the position! I also got shafts back from machining so I could get them in the lathe and weld them up then I painted lots of little bits in 2k black, next I done most of the jobs that need doing befor subframe went on like aux belt (bit tight😂) shafts and shifter cables and power steering delete bits the subframe is on for good now I have also fitted a sports cat. I also got my set of turinis powder coated and they blasted the rocker cover for me so I gave wrinkle paint a go look pretty oem nice.. orderd some back silicone hoses for coolent and intake and recived red 🤷‍♂️ I’m too impatient and I don’t mind red 😂😂 next up is mainly wiring and silly little bits like throttle cable fuel line ect got remap booke for 17th🤞🤞and snet on 24 😂🤞 and lots of pics to follow!! 👍
F6184194-B050-4255-9785-025308326B4F.jpeg
8BF80BF5-2022-4C3E-BD01-8E4C7E0E13ED.jpeg
E517DFE9-D35E-4986-8615-AB75637EFE83.jpeg
D5BE21C1-BDD3-461C-A101-0D03B0595EA2.jpeg
AA2222F6-A6F0-4E1D-B943-E9229155A1C9.jpeg
D6293AB1-8F34-414E-B5C3-2D365276E784.jpeg
D06C4609-F4AE-4B0B-B195-8BA7B246599D.jpeg
FF0F9138-E892-4BDF-9F3D-0B26F1471E38.jpeg
D593BC5C-F6C1-4A94-914C-383E6460F503.jpeg
 

Ben perry

ClioSport Club Member
  Clio 172 cup
A big update!!
so made a new fuel line and got the inlet injector rail and throttle body fitted! But I did have to re make the top rad mounts as the idle control valve plug was basically touching the fins no biggie!! Then fitted dynodaze Hondavert ecu turned the key and fired straight up!! although it was doing this weird hunting thing (like a air leak) but I put it down to the base map so I took it 150 miles to dynodaze who were absolutely on the ball And pointed out idle controls Probly stuck open so I had a tinker freed it off and that was problem 1 sorted!! So got it on dyno and running way to rich didn’t kno if fuel pressure was right as I’m running clio pump then dynodaze then said it’s got bigger injectors they come with the engine so I assumed they were stock but further inspection all injectors were odd fortunately they had a stock set so I sling them in and we were away with the tuning!! And managed 243.9 bhp and 177.6 lbft!! I was hoping to atleast be 230ish hp just need to finish inside need to sus Speedo and Rev counter aswell but not that important got snetterton booked for Thursday so 🤞I got a set of giti semi slicks for then and also got a set of turbines blasted so I need to give them a quick lick of paint!! That’s it for now!!
Cheers again
9E61228C-652E-4901-BCB0-C749C156C387.jpeg
1F71BA56-4671-4CD7-AA5A-3E2636EE70F6.jpeg
262D5F6C-E286-405E-9693-BF3DE7D092B6.jpeg
D5EDCB43-1459-4824-8669-C5C8B3D0E97B.jpeg
CFD86084-5E99-416C-A86B-00A24B8C6394.jpeg
A8215AB2-B265-4F2F-A9A3-A9B80E8B26AA.jpeg
589E4C59-066A-4F56-B6E7-E924B5813BD3.jpeg
AD4160C8-7830-415B-AA12-A2E1BD8C9FBB.jpeg
62FE700B-FD7E-4681-926F-500CBC93755F.jpeg
 
  2010 clio rs200
Love it definitely gonna be a show piece when completed! Gmg not quite but fair play! Can't wait to see finished project 👍👍
 

Ben perry

ClioSport Club Member
  Clio 172 cup
So track day was a success, day befor I got a chance to dust some red 2k on turbines and got giti tyres fitted and they were really good i will deffo buy again!! And just performed well all day I need to have a go at wheel alinement as I didn’t touch it just dropped coilovers as was to high because the engine was lighter 🙈 anyway pics.. oh and I wasn’t the only yellow kangoo there you can’t make it up ffs 😂😂😂
645639C4-2970-4949-9240-FC8F18BAE0C4.jpeg
E99A5273-D0D4-4A9A-ABF1-9BFD5CD18119.jpeg
83B95E70-28E9-430F-AC5F-72C0ADF93ACF.jpeg
86E969CB-5C11-47D6-81DF-DD1A1C9A9C70.jpeg
30A133D4-0B65-4838-88FD-6AAAE41F3144.jpeg
3C9D9502-0F68-4625-8E45-14A0957B8CB3.jpeg
BF1AB2A0-F3B9-409A-A6AA-61688362EDD9.jpeg
28318D38-A7C3-44B0-86C7-1F1640314E0B.png
 

Ben perry

ClioSport Club Member
  Clio 172 cup
So not a major update but..
Did wheel alinement as when I fitted k20 setup it’s was a lot lighter and I wanted it to look cool I dropped coilovers a inch to look good and never checked alinement (it drove like shite) 🙈
CA951CE2-D393-48C1-815E-FDBDBAF15C30.jpeg
7A456359-AA90-4AFF-8A71-1C1A0D6E4B7E.jpeg

so I set it towing out and -3 camber and levelled out the coilovers
43071B1A-924C-4058-BDB0-6067C5C3B5A1.jpeg
1E90DC82-EBB5-429B-9377-8D80DFDC7907.jpeg

I had a track eve booked last week so have had a well earned wash loaded up and set off and as expected no probs and handling was awesome the amount of people that couldn’t work out why it was so quick till they would have a gander in the pits and be surprised 😂
81F7C85C-37A1-4204-91D5-69005B8159BB.jpeg
98FB6576-CDAA-4ADA-8569-662F9FF2BDF5.jpeg
3A776ECA-CED8-4E49-8617-D23241265882.jpeg
EE245623-F1E7-45CA-9AD1-CD170D19EFD1.png
And back on the 15 corse ally’s I think I prefer to the turinis but I dunno I just like a change 😂😂
AFB1C731-0913-4FD4-BC57-E0510F34A8DB.jpeg

Cheers again
 


Top