Jekyll
ClioSport Club Member
The joys if being low, sacrificing ride comfort and practicality to look good lol.
Does look good though
Does look good though
ClioSport.net
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
My K4M shed
- Thread starter G3 NYX
- Start date
The joys if being low, sacrificing ride comfort and practicality to look good lol.
Does look good though
I actually take my car on track though
Ibiza Cupra 180
how far is your splitter off the floor ?
Last edited:
Knuckles
ClioSport Club Member
what kind of ridiculous car parks do you have down there? the only time ive not been able to get into car parks was when i first got the coilovers on, i wound them down too much (by accident) and scraped on the camber of the road lol!
still, after i got it sorted my car was lower than yours and i could still drive everywhere haha
the trick to getting on curbs is to get parallel and whack full lock on
MG ZR 1.8
what kind of ridiculous car parks do you have down there? the only time ive not been able to get into car parks was when i first got the coilovers on, i wound them down too much (by accident) and scraped on the camber of the road lol!
still, after i got it sorted my car was lower than yours and i could still drive everywhere haha
the trick to getting on curbs is to get parallel and whack full lock on
The car park I park in for work has a massive dip!
And one of the multi story car parks is silly steep. But apart from that it's fine.
An there's a curb at my house which my exhaust ect catches on. Te rests fine
But I'm not going as low as Adam! Haha.
Ps- I see you have sport bumpers, how hard to fit?? I have some on the way an have no idea how to do it
Nahh I've gone too far with the calipers etc, I'm doing my engine orange when the cams go in.
Looking good!
No more 4 wheel drifting for you being that low
Lol! Still got budgets on the rears but soon!
RS172 Flamer
Orange Mirrors!
And where did you get the cams?
Catcams off Hal Ridge, and I don't know about the mirrors... maybe
RS172 Flamer
Catcams off Hal Ridge, and I don't know about the mirrors... maybe
I personally think it will suit but everyone has a different opinion
Did you end up getting an adapted 182 manifold from Hal?
I personally think it will suit but everyone has a different opinion
Did you end up getting an adapted 182 manifold from Hal?
Noo couldn't afford it, but I'll get one when I can, makes a massive difference.
RS172 Flamer
Yeah I really wanted to get one but fixing the car was my first priority lol.
Were you going to get a 182 sports cat aswell or maybe a de-cat pipe?
Anymore progress mate?
Where did you get your spacers from, I need to acquire some for mine
Yup!
Homemade Renaultsport strut brace and K-tec boot mat!
I got my spacers off a company called 'Essex Stlying' lol, they were £120 and the rears don't fit properly!
I'm going to be getting some eibach ones soon.
Rs200
this is why i want to get a ph2 lol
Sorted out my spacers! For the rears you have to take the cap off the bearing, put the spacer on and then glue the cap to the spacer!
Works a treat now!
Also fitted the battery box behind the passenger, might move it though since there's not much room for a passenger anymore
I stopped the strut brace from knocking, just put a piece of microfibre between the rubber mount and the brace.
Almost made my exhaust perfect, got a proper clamp on the cat join, just need a new rear clamp and jobs a gooden.
I really REALLY need to get my cams in soon! Got a nurburgring trip planned and I want to be the fastest thing on the track!
Works a treat now!
Also fitted the battery box behind the passenger, might move it though since there's not much room for a passenger anymore
I stopped the strut brace from knocking, just put a piece of microfibre between the rubber mount and the brace.
Almost made my exhaust perfect, got a proper clamp on the cat join, just need a new rear clamp and jobs a gooden.
I really REALLY need to get my cams in soon! Got a nurburgring trip planned and I want to be the fastest thing on the track!
