ClioSport.net
Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
JDM Dc2
Re: Project 172 **** ITB'S - 204bhp *** February Redline Feature
i just find its usefull to see what going on, mine after say 5 full on laps its upto 100degrees ish, would be good to compare to bens.
i just find its usefull to see what going on, mine after say 5 full on laps its upto 100degrees ish, would be good to compare to bens.
Re: Project 172 **** ITB'S - 204bhp *** February Redline Feature
I'm just gona do a couple of warming up laps. If it breaks, gauges won't save it
I'm just gona do a couple of warming up laps. If it breaks, gauges won't save it
Re: Project 172 **** ITB'S - 204bhp *** February Redline Feature
Tyres are on.
Very lively when new
Tyres are on.
Very lively when new
03 RS clio 172 flameR
Re: Project 172 **** ITB'S - 204bhp *** February Redline Feature
True.
mini roundabout = Epic fail!
Tyres are on.
Very lively when new
True.
mini roundabout = Epic fail!
Re: Project 172 **** ITB'S - 204bhp *** February Redline Feature
New discs and pads on! What a knightmare, all 4 locating nut things for the discs rounded off while trying to losen them, so had to drill them out, and wack a T50 torque into the soft metal i had chizzled to unscrew them.
Assuming itll take a bit for the brakes to bed in, as they dont feel as strong as before?
Pulls alot better now, as i think the old ones were fooked, and binding/sticking on.
New discs and pads on! What a knightmare, all 4 locating nut things for the discs rounded off while trying to losen them, so had to drill them out, and wack a T50 torque into the soft metal i had chizzled to unscrew them.
Assuming itll take a bit for the brakes to bed in, as they dont feel as strong as before?
Pulls alot better now, as i think the old ones were fooked, and binding/sticking on.
Re: Project 172 **** ITB'S - 204bhp *** February Redline Feature
Erm can do mate yeh, leave it with me
Erm can do mate yeh, leave it with me
Re: Project 172 **** ITB'S - 204bhp *** February Redline Feature
Best off heat cycling properly mate asap, that can draw the best of out any braking system.
Best off heat cycling properly mate asap, that can draw the best of out any braking system.
Last edited:
Re: Project 172 **** ITB'S - 204bhp *** February Redline Feature
Decided to have a go at relocating my switches today, to get ready for my carbon door cards coming, wanted to keep the O.E switches so...
First i butchered the wiring, then made a template out of carboard for the switch.
Then made a mock up out of some plastic to 100% make sure it would work.
Then i set about carefully cutting the switch panel that also has the dimmer switch on, end result is -
Still works the same as normal, just in a much better place, and easily reachable Looks better in the flesh, but meh, function over good looks
Decided to have a go at relocating my switches today, to get ready for my carbon door cards coming, wanted to keep the O.E switches so...
First i butchered the wiring, then made a template out of carboard for the switch.
Then made a mock up out of some plastic to 100% make sure it would work.
Then i set about carefully cutting the switch panel that also has the dimmer switch on, end result is -
Still works the same as normal, just in a much better place, and easily reachable
Looks better in the flesh, but meh, function over good looks CBA with accurate. It works = done
See your wanted thread
See your wanted thread
TrackCar & F30 330d
Can you reach it when your strapped into your buckets?
I can reach mine, hehe
Oh and it looks very nice
I can reach mine, hehe
Oh and it looks very nice
Yeh, i did check that just before i fitted it
TrackCar & F30 330d
Arrr i see, does look nice tho.
What have you done with the passenger sides switched and bits?
What have you done with the passenger sides switched and bits?
Not tackled the passenger side yet. Might ditch it completely, as I rarely have passengers.
DCi 100
Just stick the passenger side in the glovebox. But then if anything is in there, could open it etc.
TrackCar & F30 330d
Yeah, just hide all the wiring away then.
The good bit about my way of doing it is tha the passengers and driver can do their windows down
The good bit about my way of doing it is tha the passengers and driver can do their windows down
6 months again, another service
MOT on wednesday as well Fingers crossed!
MOT on wednesday as well
Fingers crossed!
Coupe/Defender V8
I'm sure it'll be fine! Reminds me to change my box oil.
Horn wont work though
Horn wont work though
Under passenger wheel, fiddle with the connectors mate. worked for me
Tried that, had it off today, wired it to a battery and it works fine.
But when i press the button on the stalk i get nothing
But when i press the button on the stalk i get nothing
#174
Looking good!
I had the same problem with my horn, just wired in a new button in the end!
Also if you need to fit the cat back in for the mot, it will fit onto the omp mid section and backbox, altho it barely sits in the mounts! Sounds proper lame with the cat in too lol (just had to do mine for the mot).
I had the same problem with my horn, just wired in a new button in the end!
Also if you need to fit the cat back in for the mot, it will fit onto the omp mid section and backbox, altho it barely sits in the mounts! Sounds proper lame with the cat in too lol (just had to do mine for the mot).
How did you wire in a new button mate? Any pics
Ph1 172 and Red 197
By law you need one for a road car.
Great project. Hope to get mine going again when I finish Uni in 5weeks.
Cage + seats, then get rid of ktec coils for better set up coilovers. Then charger or turbo or ITB
Im not going full stippd though, more a usable track/fast road car. Save weight were I can but not to the total detriment of drivin comfort.
Great project. Hope to get mine going again when I finish Uni in 5weeks.
Cage + seats, then get rid of ktec coils for better set up coilovers. Then charger or turbo or ITB
Im not going full stippd though, more a usable track/fast road car. Save weight were I can but not to the total detriment of drivin comfort.
Last edited:
Will get birchdown to have a look on Wednesday when it goes there for its MOT.
Relocated the passenger side switch today - Again its not pretty, but it does the job
Relocated the passenger side switch today - Again its not pretty, but it does the job
DCi 100
What are they going to do kick it to open it lol!
That's a perfectly good dash your hacking into though Chop away all the glove box and lower section that side. Have gusseted aluminium (sp) plate for the passenger foot rest with 1.5 inch barriers on either side, put the fuse box behind that and just have 2 bolts on the floor holding it in.
Like this, but not so f**king chunky and thick:
http://www.sm-engineering.co.uk/alloy_foot_rest.php
IMO.
You never cleaned these suede style inserts aswell did you?
That's a perfectly good dash your hacking into though
Chop away all the glove box and lower section that side. Have gusseted aluminium (sp) plate for the passenger foot rest with 1.5 inch barriers on either side, put the fuse box behind that and just have 2 bolts on the floor holding it in. Like this, but not so f**king chunky and thick:
http://www.sm-engineering.co.uk/alloy_foot_rest.php
IMO.
You never cleaned these suede style inserts aswell did you?
LOL, you can reach it, i checked
Will be gutting the dash, but when i get my cage
Clean? Me? Naaaaaaahhh
DRIVEN!!
Will be gutting the dash, but when i get my cage
Clean? Me? Naaaaaaahhh
DRIVEN!!
#174
Feed from the horn to one side of a switch (ran the horn feed through the grommet in the passenger footwell), other side of the switch goes to the battery. I've still got the standard horn, but I removed one of them. I made a bracket out of some 1mm aluminium to mount the new horn and used the earth from the old battery (I have a race one under my seat like you have). Works fine!
I just tied the button somewhere near the gearstick for the mot but will be relocating it to somewhere better when I can get the dash off. Will get a pic 2nite!
Pics would be good mate thanks
Sweet! nice one mate!
TrackCar & F30 330d
What cage are you looking into getting?
MOT passed, needed ball joint, and a new horn
Full cage if possible, probably an OMP one from ebay
Full cage if possible, probably an OMP one from ebay
TrackCar & F30 330d
http://cgi.ebay.co.uk/AB-106-233A-O...arts_Vehicles_CarParts_SM?hash=item5639353bce
this is the one just like mine
this is the one just like mine
The Boosh!
ClioSport Admin
Elise, Duster
Going to look awesome Bill! I mean Ben.
:boring: (You are still awesome - x -)
:boring: (You are still awesome - x -)
